Antique Finishes provide accurate coloration.
Antique Finishes provide range of colors and tones on most metal surfaces including steel, brass, bronze, copper, pewter, aluminum, silver, nickel, and zinc. Color ranges can include black, golden to chocolate browns, and other red or green color variations, depending on application. Processes are operator-friendly, utilizing room temperature solutions that produce no fumes. Finishes are suited...
Read More »
Industrial Grade Enamel Coating has no odor.
Beyond(TM) Multi-Purpose Enamel produces no VOCs and no hazardous air pollutants, allowing users to paint in confined spaces without risks associated with solvent odors and flammability. Coating can be applied on metal, concrete, masonry, wood, drywall, and tile by brush, roller, or spray gun. It is fast drying and offers color and gloss retention. Product is suited for indoors and out and comes...
Read More »
Adhesive and Coating withstands temperatures to 2,400-
Ceramacoat(TM) 512N high-temperature adhesive and ceramic coating system is used in assembly of ceramic, metal, and plastic electrical components and as coating of high temperature structures requiring corrosion protection. Single part, water-based, silica-filled system offers volume resistivity of 109 ohm-cm and dielectric strength of 250 V/mil at room temperature. Odorless product contains no...
Read More »
Underfill Material is formulated for flip chip packaging.
HysolÃ-® FP4580 low stress liquid epoxy prevents cracking and delamination of chip's inner layers. It works on copper/low k flip chip laminate packages up to 50 x 50 mm with over 4,000 solder bumps. When fully cured, product forms rigid, low warp seal that dissipates stress on solder joints and extends thermal cycling performance. HysolÃ-® FP4580 underfills devices with gaps as small as...
Read More »
Must-Ask Questions When Choosing a Foam Control Agent
This eBook discusses foam controlling agents and how to find the right one for your needs.
Read More »
Reflective Aerosol Coating improves low-light visibility.
REFLECT-A-LITE(TM) paint consists of clear, reflective, aerosol coating that can be applied to items without obscuring original or daylight color. It directly reflects light from flashlights or headlights to increase visibility in the dark, under emergency lighting conditions, or in areas with low ambient light. Product may be applied to rough and complex shapes not suited for reflective films...
Read More »
Water-Borne Coating removes with alkaline cleaners.
Using advanced green chemistry, VpCIÃ-®-391 coating provides medium- to long-term outdoor protection and exhibits salt, humidity, and UV resistance. Environmentally friendly coating consists of non-toxic organic inhibitors formulated with water-based acrylic polymer. It provides low VOC that dries to tack-free coating in 30-60 min. Clear coating protects all types of steel and aluminum for up...
Read More »
Epoxy Floor Resurfacer creates chemically resistant surface.
Non-shrink TREFLITE(TM) bonds to concrete, wood, steel, aluminum, glass, and ceramic surfaces to provide nearly indestructible finish to old and new floors. Resistant to thermal and physical shock, abrasions, acids, alkalis, and solvents, product also resists steel-wheel traffic with compressive strength of 14,000 psi. Resurfacer is 100% non-skid, even when wet, and no special tools or skills are...
Read More »
Polyurethane Coatings provide waterproof surface.
Tigerdeck(TM) flexible, watertight, polyurethane coating systems protect high traffic concrete, wood, and metal substrates that require chemical resistance. Since multi-layer systems are flexible, they allow substrate to move with changes in temperature and humidity without cracking or popping off. Elastomeric, seamless membrane prevents moisture attack that causes costly damage to any slab....
Read More »
Epoxy Coating System cures at elevated or room temperatures.
The E958-12A Epoxykits, pre-measured, 2-component epoxy coating system, allows for mixing of both components within provided package. Coating cures tack-free in 4-8 hr and obtains complete cure after 96 hr at room temperature. Product may also be fully cured in 5 min at temperatures of 212Ã-
Read More »
Industrial Floor Coating is environmentally friendly.
Water-based EPOXI-COAT contains no flammable solvents, has no unpleasant odor, and is chemically resistant. Able to be applied without interrupting plant operations, product is ready for light foot traffic within 24 hr. It also works as protective topcoat or primer under other urethanes or epoxies. Available in Tile Red, Medium Gray, Dark Gray, or Tan, coating meets National V.O.C. Emission...
Read More »
The Carbontec System: A Smarter Way to Heat Your Buildings
Carbontec's paper-thin radiant heating systems reduce energy consumption costs by warming the building surfaces instead of controlling air temperature. Check out our video to learn more.
Read More »
