Ceramic Coating seals thermal spray coatings.
Ceramacoat(TM) 503-VFG-S ceramic-based sealant is formulated as single part, water-dispersible, alumina-filled system. Inert, chemically resistant, inorganic material does not outgas or decompose in high temperature corrosive applications to 3200-°F. Applied using sponge brush or pneumatic spray equipment, full cure is achieved after exposure for 1-2 hours at 700-°F. It sinters and strengthens...
Read More »
Coating is indestructible and blast resilient.
Super-Cote(TM) bonds directly to metal surfaces, providing strong resistance to abrasion, cracking, chipping, peeling, or scratching. It has high UV resistance and does not deteriorate from heat or cold. Coating also provides airtight, watertight permanent protection against formation of rust and corrosion. Super-Cote is suitable for use on haz-mat and haz-waste steel chemical storage buildings.
Read More »Mold Release Coating suits rotationally molded resins.
FrekoteÃ-® Aqualine Rotolease(TM) water-based, non-flammable release agent is designed to provide multiple releases per application with no contaminating transfer. It can be applied to molds at any temperature between room temperature and 205Ã-
Read More »
Carbide Tool Coating lasts longer, removes more material.
Tests show that BALINITÃ-® X.CEED coating for carbide tools increases service life up to 3x versus company's previously used coatings. Cutting tests involved materials with hardness up to 62 HRC. It works on materials that are difficult to machine, such as titanium alloys and nickel-based metals.
Read More »
The Ultimate Guide to Powder Coating
This white paper provides an overview guide to powder coating, a three stage process including pretreatment, application and curing.
Read More »Topcoats withstand outdoor exposure.
Line of UV Weatherable topcoats includes various viscosities depending on application method, such as flexo, gravure, roll, or spray. Products can be custom designed for specific end-use requirements including flexibility, hardness, scratch resistance, and non-yellowing properties.
Read More »Coatings reduce application and labor costs.
ExpressTech(TM) coatings provide fast throughput, fast return to service, fast stack times in fabrication shops, and lower VOC emissions. Fast Clad Zinc inorganically reinforced primer can be recoated in 2 to 3 hr. Reinforced film resists topcoat bubbling, dry spray and mudcracking. FasTop Urethane floor system offers a 6-8 hr return to service. Envirolastic Polyurea can be returned to service in...
Read More »
Coating provides 300% increase in tool life.
PVD Coating consists of thick layer of titanium aluminium nitride topped by thin layer of titanium nitride, offering wear resistance and low stress state. CP200 coated grade machines variety of stainless steels and powder metallurgical materials. CP500, with high cobalt micrograin substrate, is complemented by PVD coating for threading, grooving and turning high temperature alloys. CP600 has...
Read More »
Coating suits high-visibility industrial environments.
SHERTHANE(TM) 2K URETHANE 2-component, aliphatic acrylic modified, urethane enamel is chemical and abrasion resistant and VOC compliant. It cures to durable, high-gloss, weather-resistant finish, providing long-term substrate protection. Coating may be applied to properly primed steel, galvanized metal, aluminum, and concrete. It is suitable for use in USDA inspected facilities.
Read More »
Flexible Epoxy Coating requires no primer.
Corrosion-resistant, high-solids FlexKlad E-70 may be applied to properly prepared concrete and carbon-steel substrates. Applied by roller, squeegee, or brush, coating is suitable for floor and walls that are subjected to frequent thermal expansion and contraction or vibration. Flexklad E-70 is resistant to splash and spills of many acids, alkalis, salts, oils, greases, and food chemicals.
Read More »Coating provides choice of application speed and cure.
EnvirolineÃ-® 124 is 100% solids epoxy girth weld coating for buried steel pipe, and patch kit for tanks and pipes. It offers owners and applicators choice of application speed and curing results without affecting quality of chemically resistant barrier. Pipe may be backfilled as early as 5 to 7 minutes (tack free). Envirolone 124 is applied by putty knife or trowel.
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
