New Nozzles Products

Hot Runner Nozzles suit direct gating applications.

Available in 10 lengths from 42-130 mm, Gate-Mate Lite nozzles feature square coil heater and integrated thermocouple. Conductive beryllium copper tip provides precise heat needed for proper gate control. Offered in point-gate or thru-hole tip styles, products have bodiless design that leaves no witness marks on finished molded part. They provide solutions for multi-cavity molds, thin-walled...

Dispensing Jet delivers fluid in spaces as small as 200 µm.

DispenseJet-® DJ-9000 provides high-speed delivery of variety of fluids including underfill, encapsulants, conformal coatings, UV adhesives, and silver epoxy. It creates fillet wet-out widths as small as 300 -µm on dispensed side of die. Jet dispenses fluid as discrete dots or rapid succession of dots to form 100 micron diameter stream of fluid from nozzle. It offers flow rates up to 50 mg/sec...

Nozzle suitable for oil burner installations.

Able to be used in place of hollow or solid cone nozzles with .40-8.00 gph flow, W Universal Nozzle creates spray pattern that is neither fully hollow nor fully solid. It produces uniform droplet, regardless of flow range. Nozzle provides combustion efficiency to support clean oil heat technology.

Slot Nozzle simplifies precise application of adhesives.

Model EB60V edge-banding slot nozzle, for woodworking applications, incorporates remote adjust feature that enables users to control coating width from up to 100 ft away with 0.0007 in. accuracy. Coating width can be adjusted to 2.4 in. via servo-drive motor, which is directed by touchscreen control with numeric keypad. Edge-banding application heads of closed system apply adhesives such as EVA,...

The Benefits of Safety Grating Over Similar Options

In this eBook, discussed are the factors to consider when choosing the right safety grating for your application and details about the varieties offered by Metalex.

Fixed Discharge Nozzles are FM approved.

Grate Nozzles-® deliver foam/water solution for underwing protection in aircraft hangars. Installed on piping in trench drains that run length of hangar, they effectively eliminate obstruction problems. Units discharge solution in 360-

Welding Consumables reduce down time in MIG applications.

Centerfire-® contact tips drop in gas diffuser and are locked in place by tightening nozzle. They do not require tools to change, and, when coupled with correct nozzle, stay fixed either flush with end of nozzle, at 1/8 in. recess, or 1/4 in. recess. Large diameter bases and tapered seats increase electrical conductivity and heat transfer. Hand tightened nozzles come with built in spatter...

Straight Flow Nozzle suits grinding operations.

Loc-Line 1 in. Straight Flow Nozzle optimizes even flow pattern over 1 in. wide area while reducing fluid build-up at nozzle's edges. It is suitable for grinding operations and EDM work where even flow pattern contributes to efficient cutting operation.

Spray Nozzle has anti-clog design.

Machined from solid brass, stainless steel, or PVC in one-piece design, YS Series Twister(TM) Nozzle allows full cone spray at low pressures. Product is suited for blasting away residue in washing and rinsing tasks and may also be used in gas cooling, chemical processing, and humidification applications. With no internal vane to clog or wear out, unit provides increased flow rate when compared to...

Spray Nozzles use compressed air or gas.

Series JPL Air Atomizing Spray Nozzles produce controlled liquid dispersion. Standard assembly consists of 7 components that fit together to produce spray pattern. JP Air Cap and JL Liquid Nozzle determine spray pattern and liquid/air flow rates. Nozzles and components are offered in 303 SS, 316 SS, and nickel-plated brass. Applications include humidification, cooling, air pollution control,...

Vacuum Cartridge Inserts save space and weight.

Single-stage venturi vacuum cartridge inserts, offered in 13 models, are installed into cavities within pieces of equipment to eliminate need for pumps. Products consist of interchangeable nozzles and diffusers that optimize equipment performance based on desired vacuum level, vacuum flow, evacuation speed, and air consumption. Color-coded cartridges are made of anodized aluminum and operate from...

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.