New Ultra Helix 250 T2 Nozzle Available with 12 mm Nozzle Bore
Ultra Helix™ 250 T2’s extended maintenance interval PX actuation is designed for applications with leakage prone resins like TPE and PE. Pitch spacing down to 15mm enables the high cavitation density and small mold footprint. Ideal for specialty and flip-top closures, small medical parts and multi-material parts with limited gate access.
Read More »New Ultra Helix 250 T2 Nozzle Available with 12 mm Nozzle Bore
Ultra Helix™ 250 T2’s extended maintenance interval PX actuation is designed for applications with leakage prone resins like TPE and PE. Pitch spacing down to 15mm enables the high cavitation density and small mold footprint. Ideal for specialty and flip-top closures, small medical parts and multi-material parts with limited gate access.
Read More »
New 1/4 NPT Liquid Nozzle Operates up to 100 PSIG Liquid Pressure
1/4 NPT FullStream™ liquid atomizing spray nozzle is available in variety of flow rates and is corrosion resistant as well as works well with liquids containing particulate. Tangential flow design is vaneless which creates wide open internal features to resist clogging while producing a uniform distribution in a round pattern with medium to large droplets. Applied to solve cooling, cleaning,...
Read More »
New 1/4 NPT Liquid Nozzle Operates up to 100 PSIG Liquid Pressure
1/4 NPT FullStream™ liquid atomizing spray nozzle is available in variety of flow rates and is corrosion resistant as well as works well with liquids containing particulate. Tangential flow design is vaneless which creates wide open internal features to resist clogging while producing a uniform distribution in a round pattern with medium to large droplets. Applied to solve cooling, cleaning,...
Read More »
Key Considerations for Medical PCB Assembly
This white paper provides an overview of key considerations for medical PCB assembly.
Read More »
New 1/2 NPT Air Atomizing Spray Nozzles are CE Compliant and Conflict Mineral Free
Available in narrow angle flat fan pattern and can be used on liquids above 300 centipoise. Flow ranges from 141 Gph to 303 Gph (534 Lph to 1147 Lph) and allow air and liquid flow to be adjusted independently. Ideal for sanitization, decontamination, cooling, cleaning, dust mitigation, coating or humidification.
Read More »
New 1/2 NPT Air Atomizing Spray Nozzles are CE Compliant and Conflict Mineral Free
Available in narrow angle flat fan pattern and can be used on liquids above 300 centipoise. Flow ranges from 141 Gph to 303 Gph (534 Lph to 1147 Lph) and allow air and liquid flow to be adjusted independently. Ideal for sanitization, decontamination, cooling, cleaning, dust mitigation, coating or humidification.
Read More »
New No Drip Air Atomizing Nozzles are Ideal Where No Post-Spray Drip is Permissible
Available in narrow angle round, wide angle round and flat fan liquid patterns with 1/8, 1/4 and 1/2 NPT inlets. Mixes liquid and air inside the nozzle and can be used on liquids with a viscosity up to 300 centipoise. Stops liquid flow when compressed air is shut off to eliminate the possibility of drips.
Read More »
New No Drip Air Atomizing Nozzles are Ideal Where No Post-Spray Drip is Permissible
Available in narrow angle round, wide angle round and flat fan liquid patterns with 1/8, 1/4 and 1/2 NPT inlets. Mixes liquid and air inside the nozzle and can be used on liquids with a viscosity up to 300 centipoise. Stops liquid flow when compressed air is shut off to eliminate the possibility of drips.
Read More »
New 1/8 NPT Siphon Fed Spray Nozzles are CE Compliant and Corrosion Resistant
Combines liquid and compressed air to create mist of atomized liquid that can be adjusted to meet the needs of application. Features patented No Drip version to conserve valuable liquids and improves product finishes. Available in stainless-steel construction Can be used with gravity fed liquids or lift liquids from siphon height as much as 36 inches (91cm).
Read More »
New 1/8 NPT Siphon Fed Spray Nozzles are CE Compliant and Corrosion Resistant
Combines liquid and compressed air to create mist of atomized liquid that can be adjusted to meet the needs of application. Features patented No Drip version to conserve valuable liquids and improves product finishes. Available in stainless-steel construction Can be used with gravity fed liquids or lift liquids from siphon height as much as 36 inches (91cm).
Read More »
Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor
As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.
Read More »
