Nozzles

Replacement Nozzles enable accurate chip placement.
Nozzles

Replacement Nozzles enable accurate chip placement.

Available for Panasonic NPM machines with high-speed and multi-functional placement heads, Replacement Nozzles offer high-productivity alternative to OEM nozzles. Most standard nozzles are available in variety of materials, such as high strength plastic, tool steel, and ceramic. Nozzles utilize same style reflectors as OEM with special hard coating to provide waterproofing, prevent scratches, and...

Read More »
Sono-Tek Corporation to Show the New QR Impact Jet for the Spray Fluxer at APEX
Atomizers

Sono-Tek Corporation to Show the New QR Impact Jet for the Spray Fluxer at APEX

Milton, NYÂ- – Sono-Tek Corporation (OTC BB: SOTK) will highlight the newest improvement to the SonoFlux ultrasonic spray fluxer design, the QR Impact Jet in Booth #3521 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. The Impact atomizing assembly is used in both the Sono-Flux Servo and Sono-Flux EZ system and incorporates an...

Read More »
Count On Tools Inc. to Introduce New StripFeeder Mini at the IPC APEX EXPO
Parts Feeders

Count On Tools Inc. to Introduce New StripFeeder Mini at the IPC APEX EXPO

GAINESVILLE, GA - Count On Tools Inc. (COT), a leading provider of precision components and SMT spare parts, will exhibit in Booth #3625 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. COT will debut the new StripFeeder Mini that features the same award-winning design of the StripFeeder in a smaller package (134mm x 152mm). The...

Read More »
Hot Runners

Husky Showcases New Barrier Solution, Demonstrates Range of Innovative Technologies for Beverage Packaging, Medical and Hot Runners at NPE 2015

BOLTON, Ontario – Husky Injection Molding Systems today announced that at NPE 2015 (March 23 – 27, Orlando, Florida) it will be showcasing its latest technologies for the beverage packaging, medical and hot runner markets, demonstrating that it provides customers with the highest levels of quality, productivity and reliability. Located at Booth #2117 in the West Hall, Husky will have a...

Read More »
Multi-Tip Hot Runner Nozzles will not cause tubular core bending.
Nozzles

Multi-Tip Hot Runner Nozzles will not cause tubular core bending.

Designed for axial injection of small tubular parts, Thermoplay® DN5/3 Series provides balanced filling that prevents flow lines and reduces risk of core pin bending caused by high injection pressures.Â- Nozzles can also be used for direct lengthwise injection on walls of parts and feature symmetrically arranged tips that can be 3.2 mm (min) away from each other. Other multi-tip...

Read More »
Tank Washing Nozzles deliver flow rates down to 4.45 gpm.
Nozzles

Tank Washing Nozzles deliver flow rates down to 4.45 gpm.

HydroWhirl Poseidon®Â- rotating tank cleaning nozzles, with flow rates from 4.45–26.3 gpm, are designed to fit through openings as small as 2 in. while maintaining slow, controlled rotation speed. While complete 360° omnidirectional coverage increases impact and cleaning efficacy, slow-spinning spray and extended spray dwell time on target surface...

Read More »
Single Needle Valve Gate Nozzle offers all-in-one construction.
Nozzles

Single Needle Valve Gate Nozzle offers all-in-one construction.

Designed for use with nozzles of TechniShot Z33/… series, ready-to-install SNV-06/-12 feature hydraulic or pneumatic drive, melt detection, and flanged-on nozzle. Needle diameters of 2–6 mm and needle strokes of 8–12 mm minimizeÂ- pressure losses, while melt guidance enables results achieved with single-cavity mould to be directly transposed to multi-cavity applications. With optimized...

Read More »
Air Nozzle Swivel Fittings facilitate precision blow off.
Nozzles

Air Nozzle Swivel Fittings facilitate precision blow off.

Available inÂ- 3 sizes, Type 316 Stainless Steel Mini Swivel Fittings facilitate position adjustment of any 316SS or PEEK thermoplastic mini Super Air Nozzles. These 1/8 MNPT Mini Swivel Fittings provide smallest nozzles 50° total angle of adjustment for maximum effectiveness and also works with M4x0.5 Atto Super Air Nozzle, M5x0.5 Pico Super Air Nozzle, and M6x0.75 Nano Super...

Read More »
Drip-Free Atomizing Nozzles positively stop liquid flow.
Nozzles

Drip-Free Atomizing Nozzles positively stop liquid flow.

In addition to mixing liquid and airÂ- internally and producing fine atomization of liquids up to 300 centipoise, No Drip Internal Mix Atomizing Spray Nozzles positively stop liquid flow when compressed air is shut off. This prevents unwanted drips that can ruin product function on sealing/mating surfaces and appearance of painted/coated finishes. Available patterns include...

Read More »
Miscellaneous Controls

Husky Takes Hot Runner and Controller Capability to the Next Level - innovative Technologies for Total Mold Control at Fakuma 2014

BOLTON, Ontario – Husky Injection Molding Systems today announced that it will showcase its latest technologies in hot runners and controllers at Fakuma 2014 (October 14 – 18, Friedrichshafen, Germany), including UNIFY™ pre-assembled manifold systems, ALTANIUM MATRIX2™ hot runner and mold controllers, and an exciting first look at our ground-breaking next generation valve gate nozzles....

Read More »

All Topics