PEEK Air Nozzle ensures precise, non-marring blowoff.
Designed to replace existing nozzles or open pipes, Model 1109-PEEK Pico Super Air Nozzle produces narrowly focused air pattern. Amplification of airflow and blowing force of 5.0 oz are achieved with air consumption of 4.9 scfm at 80 psig. While overall length of 0.63 in. and diameter of 0.20 in. permits installation in tight spaces, PEEK thermoplastic construction provides self-lubricating...
Read More »Embraer and Trans States Sign Deal for up to 100 E175-E2s
FARNBOROUGH, United Kingdom - Embraer S.A. announced today, at the 2014 edition of the Farnborough International Airshow, that it has received an order for 50 E175-E2 jets from Trans States Holdings, parent company of Trans States Airlines, Compass Airlines and GoJet Airlines. The agreement also includes options for an additional 50 units, taking the total order potential to 100 aircraft....
Read More »
Waterjet Nozzle cleans tubes at up to 40,000 psi.
Self-rotating water jet nozzle, RPN4009, cleans pipes and tubes at pressures up to 40,000 psi. Designed forÂ- minimum pipe diameter of 0.75 in., this 4 ¾ in. long nozzle is precision machined and coated with titanium nitride for extended operational expectancy. Product is available with cutting/cleaning or polishing heads, supports max flow of 9 gpm, and rotates at...
Read More »
CO2 Laser Nozzles produce direct and focused cutting beam.
Supplied in cylindrical and conical configurations, LRO CO2 Laser Nozzles feature ±10 micron orifice size accuracy and are available in brass, copper, aluminum, and ceramic with straight and tapered tips from 0.375–0.96 in. long. Thread sizes range from Â-¼–5/8 in., and optional brass nozzle lock rings are available. Supplied in 1.2, 1.5, and 2.0 mm orifice sizes, nozzles direct...
Read More »
The Benefits of Safety Grating Over Similar Options
In this eBook, discussed are the factors to consider when choosing the right safety grating for your application and details about the varieties offered by Metalex.
Read More »
Water Jet Lance suits applications up to 24,000 psi.
By eliminating bend radius in hose that supplies high-pressure water, Model NCG24-535 minimizes stress on inlet connection. Instead, unit has inlet tube with 90° bend and safety shroud that surrounds hose where it attaches to lance. One-finger latch prevents accidental actuation, while patented trigger immediately dumps pressure when operator pushes it forward. Weighing 12 lb with standard...
Read More »
PEEK Air Nozzle provides non-marring blowoff.
Operating at temperatures up to 320°F, Model 1104-PEEK 3/8 NPT Super Air Nozzle™ resists harsh chemicals and is suitable for blowoff, cooling, and drying applications in general industrial or corrosive environments. Amplification of airflow produces blowing force of 1.9 lb with air consumption of 35Â- scfm at 80 psig. Since airflow cannot be blocked, nozzle meets OSHA dead-end...
Read More »
Blow Off Nozzle combines power and compressed air conservation.
Made of cast zinc aluminum or 316L stainless steel, 2 in. wide Nex Flow™ Air Edger™ Flat Jet Nozzle produces laminar flow of air along its 2 in. length using Coanda effect. Gap is maintained by shim, and changing or stacking various shim sizes lets operator set force required for application at hand. Supporting side by side placement, rugged unit meets OSHA pressure level...
Read More »The Nex Flow(TM) Air Edger(TM) Flat Jet Nozzle Comes in a Wide Range of Output Force and Provides a Powerful Blow Off While Reducing Compressed Air
TheÂ- Nex Flow™ Air Edger™Ã‚ Flat Jet Nozzle, provides a powerful force while reducing compressed air use for a variety of blow off applications..  The unit is 2 wide and the gap is maintained by a shim. Changing or stacking various shim sizes allows you to set the force that you need for any particular application – from a light blow off to a powerful...
Read More »
Brass Air Jet increases blow off and cooling efficiency.
Using Coanda profile to optimize flow and force, Nex Flow™Ã‚- Model 45002B produces downstream air that has high velocity and laminar flow for increased blow-off and cleaning power. Air jets use compressed air and entrain surrounding air to amplify air flow downstream, minimizing compressed air use for blow off and cooling applications as well as part ejection. Adaptable to diverse...
Read More »
Selective Soldering Nozzles work with Pillarhouse equipment.
Available in ID threaded versions, Pillarhouse AP universal nozzles for selective soldering machines are constructed of steel alloys, precision machined, and available in standards sizes from 2.5–14 mm. Identification marks are available for distinguishing leaded and lead-free versions, and custom selective solder nozzles are also available based on specific application requirements: wave form...
Read More »
General Pipe Cleaners Presents Lightweight, Powerful JM-1000 Mini-Jet
The lightweight, compact JM-1000 Mini-Jet clears grease, sand, and ice with a high pressure water jet.
Read More »
