Nozzles

MIG Gun Nozzles minimize changeovers.
Nozzles

MIG Gun Nozzles minimize changeovers.

Featuring removable nozzle cone, Quik Tip™ HD Series Nozzles minimize frequency of changeovers associated with heat degradation and routine wear. Welding operator can replace nozzle cone without having to remove or replace entire nozzle or contact tip. Design also expedites spatter cleanup by providing access to nozzle body for spatter removal. In addition, increased wall thickness and...

Read More »
Dassault Aviation Set to Deliver First 2000S Business Jet in India
Nozzles

Dassault Aviation Set to Deliver First 2000S Business Jet in India

SAINT-CLOUD, France – New Falcon entry level jet off to flying start Dassault Aviation is preparing to deliver its new Falcon 2000S business jet into the important Indian market, following certification by the Indian airworthiness authorities. The 2000S was certified on November 1st, continuing a process that began in the spring of 2013 with the receipt of FAA and EASA approvals. The aircraft...

Read More »
Sono-Tek Corporation to Showcase SonoFlux Servo Dual Flux System at Productronica
Miscellaneous Film

Sono-Tek Corporation to Showcase SonoFlux Servo Dual Flux System at Productronica

Milton, NYÂ- – Sono-Tek Corporation (OTC BB: SOTK), today announced that it will feature its SonoFlux Servo Dual Flux ultrasonic spray fluxing system in Stand 141-3 at the 20th international Productronica International Trade Fair, scheduled to take place November 12-15, 2013 at the New Munich Trade Fair Centre in Munich, Germany. A variation of Sono-Tek's proven, versatile SonoFlux Servo...

Read More »
Stainless Steel Flat Air Nozzle resists corrosion.
Nozzles

Stainless Steel Flat Air Nozzle resists corrosion.

Consuming 10.5 scfm at 80 psig, Stainless Steel Flat Super Air Nozzle™ produces flat 1 in. wide airstream with blowing force of 9.8 oz when mounted 12 in. from target. Precise amount of air is released through .015 in. air gap opening that is set with stainless steel shim positioned between body and removable cap. High velocity airstream pulls in surrounding room air to produce forceful stream...

Read More »
Nozzles

Universal Nozzles simultaneously cut and polish tubes.

There are 7 universal heads available for Typhoon™ RPN1510, RPN2410, RPN1520, and RPN2020 self-rotating, stainless steelÂ- nozzles that can cut through blocked tubes while polishing tube ID, eliminating need for nozzle change. Combining cutting orifices and polishing orifices in one design, nozzles clean tubes as small as 5/8 in. dia while rotating at speeds up to 7,000 rpm....

Read More »
Spray Core Glue System works with turret rewinders.
Applicators

Spray Core Glue System works with turret rewinders.

Replacing core glue pot with traversing nozzle, Programmable Spray Core Glue System applies glue to cores on rotating spindle. Stroke, beginning and end points of glue nozzle traverse are controlled through PLC. Equipped with large tank and pump supplying glue to applicator nozzle, system extends turret runs before having to add more glue. System can be programmed to provide gap in spray pattern...

Read More »
Nozzles

Techcon Systems Develops New High Output Series Nozzle

Garden Grove, CA — Techcon Systems, a leading provider of precision fluid dispensing products, has designed a new High Output Series dispensing nozzle in an effort to continuously provide high-quality and high-performance products to meet new market and application demands. The new High Output Series nozzle has the same external dimensions and orifice size as the standard series nozzle;...

Read More »
Air Nozzle features precise non-marring blowoff.
Nozzles

Air Nozzle features precise non-marring blowoff.

Measuring 0.50 in. long with 0.16 in. diameter for installation in tight spaces, Model 1108-PEEK Atto Super Air Nozzle™ resists damage from harsh chemicals, making it suitable for blowoff, cooling, and drying applications in general industrial or corrosive environments. Blowing force of 2.0 oz is achieved with minimal air consumption of 2.5 scfm at 80 psig. Since airflow cannot be blocked,...

Read More »
Nozzles

Tungsten EX-® Nozzles

Thermacut’s patented technology extends your plasma cutting cycle. Thermacut has expanded its’ range of Tungsten EX-®nozzles, which are a direct and suitable replacement parts, for Hypertherm’s® HPR 130/260®, MAX200®, and HT4400® plasma cutting systems. The Tungsten EX- nozzle design consist of two parts: a traditional copper base and a composite tungsten...

Read More »
Micro-Abrasive Waterjet Nozzle suits micromachining applications.
Nozzles

Micro-Abrasive Waterjet Nozzle suits micromachining applications.

Using micro-abrasive waterjet technology, 7/15 Mini MAXJET5i nozzle, suited for medical industry, accurately cuts delicate, complex patterns in parts made from virtually any type of material. Featuring 0.007 in.Â- orifice and 0.015 in. mixing tube combination, 7/15 Mini MAXJET5 forms fine jet stream that can produce kerf as small as 0.015 in. Abrasive waterjet technology...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers