New Nozzles Products

Cylinders are suited for stretch blow mold applications.

Designed as drop-in replacements for nozzle cylinders used in Sidel-® Series2 Heat Set machines, Series BCZ2D Cylinders promote service life and minimize maintenance/downtime in stretch blow mold machines. Bodies are made of 100% machined aluminum, and heavy-duty internal urethane shock pads absorb impact energy as well as eliminate metal-to-metal contact. Units come standard with FDA-approved...

Blow-Off Nozzles deliver uniform air pattern distribution.

Made of chemical-resistant ABS resin, interchangeable Air Wisk(TM) Nozzles are rated for applications up to 150-

Spray Head features self-rotating UHP water jet action.

Using standard lance, SPIN-NOZZLE-® Viper 40(TM) rotates by reaction energy of water, eliminating need for specially designed lance and separate air source. Accessory operates at pressures from 24,000-40,000 psi, with max flow of 6 gpm, and can be repaired in-field in under 5 min with rebuild kit. Stainless steel head features 2 carbide and sapphire nozzle inserts rotating at up to 5,000 rpm;...

Nozzle Extensions reach out-of-the-way places.

Available for conventional and HVLP spray guns, Nozzle Extensions fit applications from fine-line finishing to overglazes. Air and fluid nozzles are used with extensions for manual, touch-up, automatic, line striping, specialty, airless-hand, and airless-automatic spray guns. Small nozzles are suited for inks, stains, and dyes for fine line results, while medium nozzles meet needs of enamel and...

The Evolution of Robot Based Deburring

This white paper provides an overview into the evolution of robot-based deburring.

Abrasive Blast Nozzle optimizes velocity of abrasive.

Saber Blast(TM) nozzle uses rocket propulsion concepts to maximize velocity of abrasive. Designed for conventional as well as Sponge Media(TM) abrasives, product is lined with composite of silicon carbide and silicon nitride and features anti-static, anodized aluminum sheath. Nozzle, manufactured with 1-¼ in. brass thread or 50 mm aluminum contractor thread, can take G-50 steel grit exiting with...

CO2 Laser Nozzles control cutting gas flow.

FLOWMASTER nozzles, manufactured to -

Nozzle has modular construction.

Suited for use on Videojet EXCEL series coding and marking systems, EZ JET nozzle features field-replaceable components that can be cleaned or swapped out by in-house operators. This enables users to take it apart, change orifice or filter, flush it out, or replace faulty components. Nozzle accepts orifice sizes from 36-120 micron, making unit suitable for customers changing over one line or...

Sootblower Nozzle handles tough boiler cleaning applications.

Gemini(TM) sootblower nozzle provides equal cleaning distribution that reduces potential for sootblower-induced boiler tube erosion by approximately 60%. It is equipped with cast-body staggered nozzle jets for most effective cleaning arrangement. Gemini nozzle can improve cleaning performance of existing sootblowers, while reducing energy consumption of boiler cleaning system.

Self-Actuating Shutoff offers 1/2 to 160 oz capacity.

Add-On Self-Actuating Shutoff accessory, designed for injection molding nozzles, is installed between nozzle body and nozzle tip, minimizing material drooling and stringing problems. Made from H13 tool steel, shutoff is totally self-contained and will not leak. Internal spring and piston shut off plastic melt as nozzle tip withdraws from mold. Shutoff is 4 1/2 in. long installed, and comes with...

Hose Nozzle fights fires with fog or full flow.

Saberjet(TM) multipurpose nozzle operates at pressures as low as 50 psi for reduced firefighter fatigue, or up to 100 psi for maximum flows. Applications include interior, exterior, and high rise attacks, foam, direct and indirect attacks, cooling, protection, and ventilation. Nozzles are available in 1 in.(fog flows of 60 gpm) or 1 1/2 in.(fog flows of 95 gpm) full time swivel inlets with solid...

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.