Nozzles

DME to Display Wide Range of Engineered Hot Runner Solutions at NPE
Electrical Boxes

DME to Display Wide Range of Engineered Hot Runner Solutions at NPE

Learn how DME can be your most complete partner in mold technologies at booth #2803 Madison Heights, Mich. - DME Company, a leading manufacturer of mold technologies, will be presenting a wide range of its hot runner products at NPE 2012, booth #2803. For over 30 years, DME has offered a full spectrum engineered solutions essential for hot runner applications - everything from unitized valve...

Read More »
Rotary Tank Cleaning Nozzles feature Atex certifiication.
Nozzles

Rotary Tank Cleaning Nozzles feature Atex certifiication.

Suited for use in potentially explosive atmospheres, HydroWhirl(TM) S Nozzles meet requirements for gas and dust approvals for Zones 0, 1, and 2. Units are self-cleaning and self-lubricating, eliminating possibility of process contamination. Able to fit through small, restricted access flanges, nozzles are suited for tanks up to 5 m in diameter, and meet exacting standards for cleaning-in-place...

Read More »
Nozzles

Lockheed Martin Completes Assembly of the First International F-35 for the United Kingdom

FORT WORTH, Texas, Nov. 22, 2011 - The first international Lockheed Martin (NYSE:LMT) F-35 Lightning II rolled out of the factory Sunday evening. The United Kingdom Ministry of Defence will use the short takeoff/vertical landing (STOVL) jet, known as BK-1, for training and operational tests. BK-1 will undergo functional fuel system checks before being transported to the flight line for ground and...

Read More »
Stainless Steel Air Nozzle delivers 6.6 lb of blowing force.
Nozzles

Stainless Steel Air Nozzle delivers 6.6 lb of blowing force.

Featuring aerodynamic design that directs compressed air to single point of convergence, 1 NPT Super Air Nozzle(TM) is suited for blowoff, cooling, and drying applications located in corrosive, high temperature, food, and pharmaceutical environments. Unit is constructed of Type 316 SS with 1 Â-½ in. hex body. At 80 psig, air consumption is 135 scfm and sound level is 99 dBA, meeting OSHA...

Read More »
Air Nozzle provides precise blowoff.
Nozzles

Air Nozzle provides precise blowoff.

Measuring 0.50 in. L x 0.16 in. D for installation in tight spaces, Model 1108SS Atto Super Air Nozzle(TM) features Type 316 stainless steel construction and is suitable for blowoff, cooling, and drying applications. High amplification of airflow and strong blowing force of 2.0 oz are achieved with minimal air consumption of 2.5 scfm at 80 psig. Safe operation is assured since airflow of nozzle...

Read More »
Atomizing Nozzles generate 50° cone spray pattern.
Nozzles

Atomizing Nozzles generate 50° cone spray pattern.

Providing precise, controlled atomization, Airless Nozzles do not need external air supply and will atomize with pressures as low as 20 psi, while Air-Assisted Nozzles utilize external air source to control atomization, allowing lower fluid operating pressures down to 5 psi. Pressure of liquid and air can be independently controlled to fine-tune flow rate and nozzle performance.

Read More »
Air Nozzle features polypropylene construction.
Nozzles

Air Nozzle features polypropylene construction.

Compliant with FDA standards, PP WhisperBlast has transparent color and 16 channels of concentrated blasting power. Flat configuration which makes unit usable for use individually or side-by-side on header. Appropriate uses include cleaning, drying, and cooling applications in food, beverage, and pharmaceutical industries or wherever harsh acids might come into contact with nozzle. Product comes...

Read More »
Low-Volume Spray Nozzle serves machining operations.
Nozzles

Low-Volume Spray Nozzle serves machining operations.

Designed for spray coating applications or spot lubrication, LV nozzle consistently applies small amounts of fluid in fan or cone pattern. It is operated with compressed air input signal, and integral valve at nozzle tip allows pressurized fluid to flow when air signal is present. Volume of fluid and atomizing air are controlled with independent precision needle valves, and optional adapter lets...

Read More »
HASCO - Innovations at FAKUMA in Friedrichshafen
Miscellaneous Controls

HASCO - Innovations at FAKUMA in Friedrichshafen

HASCO's Mould Base and Hot Runner divisions will present a variety of innovative solutions for mouldmaking and tooling design at the upcoming FAKUMA in Friedrichshafen. The LÃ-¼denscheid/Germany-based company is specialised in the development and manufacture of standard mould units and hot runner systems for the plastics processing industry. The Mould Base Division will introduce its newly...

Read More »
Self-Rotating, Tube Cleaning Nozzles feature 20,000 psi max pressure.
Miscellaneous Cleaning Equipment

Self-Rotating, Tube Cleaning Nozzles feature 20,000 psi max pressure.

Typhoon(TM)10 series self-rotating tube cleaning nozzles are available for tubes with diameters of at least 0.75 in. Respectively rated for max operating pressures of up to 20,000 and 15,000 psi, models RPN 2020 and 1520 both rotate at 7,000 rpm, with max flow of 20 gpm, and feature proprietary seal design that minimizes leakage. In total, Typhoon(TM) series includes 7 self-rotating nozzles for...

Read More »

All Topics