Nozzles

Sono-Tek Corporation to Showcase SonoFlux Servo Dual Flux System at Productronica
Miscellaneous Film

Sono-Tek Corporation to Showcase SonoFlux Servo Dual Flux System at Productronica

Milton, NYÂ- – Sono-Tek Corporation (OTC BB: SOTK), today announced that it will feature its SonoFlux Servo Dual Flux ultrasonic spray fluxing system in Stand 141-3 at the 20th international Productronica International Trade Fair, scheduled to take place November 12-15, 2013 at the New Munich Trade Fair Centre in Munich, Germany. A variation of Sono-Tek's proven, versatile SonoFlux Servo...

Read More »
Stainless Steel Flat Air Nozzle resists corrosion.
Nozzles

Stainless Steel Flat Air Nozzle resists corrosion.

Consuming 10.5 scfm at 80 psig, Stainless Steel Flat Super Air Nozzle™ produces flat 1 in. wide airstream with blowing force of 9.8 oz when mounted 12 in. from target. Precise amount of air is released through .015 in. air gap opening that is set with stainless steel shim positioned between body and removable cap. High velocity airstream pulls in surrounding room air to produce forceful stream...

Read More »
Nozzles

Universal Nozzles simultaneously cut and polish tubes.

There are 7 universal heads available for Typhoon™ RPN1510, RPN2410, RPN1520, and RPN2020 self-rotating, stainless steelÂ- nozzles that can cut through blocked tubes while polishing tube ID, eliminating need for nozzle change. Combining cutting orifices and polishing orifices in one design, nozzles clean tubes as small as 5/8 in. dia while rotating at speeds up to 7,000 rpm....

Read More »
Spray Core Glue System works with turret rewinders.
Applicators

Spray Core Glue System works with turret rewinders.

Replacing core glue pot with traversing nozzle, Programmable Spray Core Glue System applies glue to cores on rotating spindle. Stroke, beginning and end points of glue nozzle traverse are controlled through PLC. Equipped with large tank and pump supplying glue to applicator nozzle, system extends turret runs before having to add more glue. System can be programmed to provide gap in spray pattern...

Read More »
Nozzles

Techcon Systems Develops New High Output Series Nozzle

Garden Grove, CA — Techcon Systems, a leading provider of precision fluid dispensing products, has designed a new High Output Series dispensing nozzle in an effort to continuously provide high-quality and high-performance products to meet new market and application demands. The new High Output Series nozzle has the same external dimensions and orifice size as the standard series nozzle;...

Read More »
Air Nozzle features precise non-marring blowoff.
Nozzles

Air Nozzle features precise non-marring blowoff.

Measuring 0.50 in. long with 0.16 in. diameter for installation in tight spaces, Model 1108-PEEK Atto Super Air Nozzle™ resists damage from harsh chemicals, making it suitable for blowoff, cooling, and drying applications in general industrial or corrosive environments. Blowing force of 2.0 oz is achieved with minimal air consumption of 2.5 scfm at 80 psig. Since airflow cannot be blocked,...

Read More »
Nozzles

Tungsten EX-® Nozzles

Thermacut’s patented technology extends your plasma cutting cycle. Thermacut has expanded its’ range of Tungsten EX-®nozzles, which are a direct and suitable replacement parts, for Hypertherm’s® HPR 130/260®, MAX200®, and HT4400® plasma cutting systems. The Tungsten EX- nozzle design consist of two parts: a traditional copper base and a composite tungsten...

Read More »
Micro-Abrasive Waterjet Nozzle suits micromachining applications.
Nozzles

Micro-Abrasive Waterjet Nozzle suits micromachining applications.

Using micro-abrasive waterjet technology, 7/15 Mini MAXJET5i nozzle, suited for medical industry, accurately cuts delicate, complex patterns in parts made from virtually any type of material. Featuring 0.007 in.Â- orifice and 0.015 in. mixing tube combination, 7/15 Mini MAXJET5 forms fine jet stream that can produce kerf as small as 0.015 in. Abrasive waterjet technology...

Read More »
BEX to Feature Full Line Up of Spray Nozzles at FABTECH 2013
Nozzles

BEX to Feature Full Line Up of Spray Nozzles at FABTECH 2013

BEX, Incorporated, Ann Arbor, MI, (www.bex.com), a leading manufacturer of industrial spray nozzles will display its wide array of nozzles in booth S-5618 at FABTECH 2013, November 18-21, 2013 in Chicago. Among its many nozzle products, the exhibit will feature the new series of air actuated, universal-mount nozzle assemblies. The BEX design, available in both T-Tip and atomizing configurations...

Read More »
Pneumatic Flat Fan Spray Nozzle offers drip-free performance.
Nozzles

Pneumatic Flat Fan Spray Nozzle offers drip-free performance.

Constructed of 303 stainless steel, HydroPulse delivers controlled intermittent liquid spray using only liquid pressure as force for atomization. Flat spray pattern provides spray angles from 0–110° with flow rates of 0.003–24.7 gpm. Featuring maintenance-friendly design, nozzleÂ- allows for disassembly, inspection/cleaning, and reassembly with basic hand tools. HydroPulse is...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics