Multiplexers

PXI Solid-State Switches handle currents up to 120 A.

Six-channel fault insertion switches 40-192/40-191 each have 2 fault busses capable of hot switching signals up to 10 A, 200 V and 30 A, 40 V, respectively. As 6-channel SPST switches, 40-182/40-183 carry ratings of 10 A, 200 V and 30 A, 40 V, respectively. Multiplexers 40-666/40-667 come in dual 3-channel or single 6-channel configurations with 10 A, 200 V and 30 A, 40 V ratings, respectively....

Read More »

DPDT Analog Switches offer -

Designed for multiplexing high speed USB 2.0 signals at 480 Mbps, Models MAX4983E/MAX4984E DPDT analog switches feature 5 W typ on-resistance and 950 MHz bandwidth. Fully specified to operate from single, 2.8-5.5 V supply voltage, devices are protected against 5.5 V shorts to COM1 and COM2. Units are available in 2 x 2 mm, 10-pin DFN and 1.4 x 1.8 mm, 10-pin UTQFN packages, and have operating...

Read More »
Switching Multiplexer can be supported by any 3U PXI chassis.

Switching Multiplexer can be supported by any 3U PXI chassis.

With POTS, USB 2.0, AFDX, and Gigabit Ethernet capability, Model 40-736 can switch communications signals carried on 100 W differential pair cables. It is configured as 8:1 or 16:1 multiplexer for GbE and 100BaseT/AFDX applications, respectively. I/O signals are carried on 78 way D Type connector, while interface adaptor card converts signals to 8:1 Ethernet MUX on RJ45 connectors for direct...

Read More »

CML Output ICs operate up to 3.2 GHz.

Series SY54xxx includes 7 low voltage CML output products with core power supply of 2.5 V that can interface directly to devices powered by 1.2/1.8 V supply. Products include 1:2 fanout buffer, differential line driver/receiver, 2:1 multiplexer, and 2 x 2 crosspoint switch. AC performance is guaranteed from dc through 2.5-3.2 GHz or 3.2 Gbps, with rise and fall times of less than 95 ps. Jitter...

Read More »

Plug-In Cards expand system switch/multimeter functionality.

Model 3724 Dual 1X30 FET Relay Multiplexer Card offers scanning speeds over 1,000 channels/sec, including measurement, and switch-only scan rates over 1,200 channels/sec. Solid state relays can be automatically configured into dual 1 x 30 or 1 x 60 multiplexer. Gated with 1 MHz input rate, Model 3750 Multifunction I/O Card features 40 DIO channels with high-current driver outputs that sink up to...

Read More »

Analog Multiplexers and Switches have low leakage currents.

Suited for precision instrumentation applications, DGxxx Series includes 4 analog multiplexers and 4 analog switches that combine charge current from 0.5-1.0 pC, switch capacitance of 2 and 3 pF, leakage currents from 0.25-5 nA, and typical on-resistance from 66-72 W. All operate from 2.7-12 V single supply or from Â-

Read More »

DWDM Network Platform is able to serve from metro to core.

With multi-service and multi-reach feature set, hiT 7300 supports all reaches and transmission speeds in metro, regional, long-haul, and ultra-long haul applications on single platform. Unit has transponder cards that support traditional SONET/SDH, Ethernet, and SAN services at different speeds. Including amplifier options and end-to-end management support for all equipment configurations, it is...

Read More »

FTTN DSLAMs maximize VDSL2 performance.

Available with 24-192 ports, Total Access 1100 Series FTTN (Fiber to the Node) DSLAMs (Digital Subscriber Line Access Multiplexers) allow service providers to realize ultra-broadband speeds over existing copper infrastructure. Products eliminate need for cabinet enclosures, heat exchangers, and site construction. This economically secures broadband connection to home and enables delivery of...

Read More »

Muxponder-on-a-Chip targets OTN networks.

Suited for ROADM/DWDM applications, MXP(TM) devices address metro networking applications by combining Next-Gen SONET/SDH functions of MSPP and OTN functions of transponder to act as muxponder-on-a-chip. This helps Service Providers utilize their WDM wavelengths more efficiently by allowing them to multiplex number of revenue-generating services on single wavelength. Muxponder cards based on MXP...

Read More »

CWDM Optics expand existing fiber capacity.

With 1 GHz CHP CORWave, MSOs can leverage existing fiber networks for delivery of HD-On-Demand, SDV, and business services. When deployed with ARRIS OptiMax4100 4 x 4 segmentable nodes, CORWave enables multiplexing of 12 wavelengths: 4 forward, 4 return and 4 bidirectional, all on one fiber with link length of up to 25 km. When deployed with ARRIS OptiMax segmentable nodes in 2 x 2 configuration,...

Read More »

All Topics