New PCW1-series Cassettes Feature LC Connectors with UPC Polish
PCWXX-series feature 1-meter 900 um fiber leads and 20 nm channel spacing. PCW5A-series include 250 um colored bare fibers and pass fiber for unused CWDM channels. Features an operating temperature range of -40°C to +85°C.
Read More »
New PCW1-series Cassettes Feature LC Connectors with UPC Polish
PCWXX-series feature 1-meter 900 um fiber leads and 20 nm channel spacing. PCW5A-series include 250 um colored bare fibers and pass fiber for unused CWDM channels. Features an operating temperature range of -40°C to +85°C.
Read More »
New I3C Multiplexers and Bus Expanders Come with Single 1.8V Input Power Supply
Feature packet error check and parity error check functions. Support up to 12.5MHz speeds and integrated thermal sensor capability. Offer 0.5°C integrated temperature sensor accuracy with 0.25°C resolution and Industrial temperature range -40°C to 125°C.
Read More »
New I3C Multiplexers and Bus Expanders Come with Single 1.8V Input Power Supply
Feature packet error check and parity error check functions. Support up to 12.5MHz speeds and integrated thermal sensor capability. Offer 0.5°C integrated temperature sensor accuracy with 0.25°C resolution and Industrial temperature range -40°C to 125°C.
Read More »
Design Guide: Heat Sinks for High-Power Applications
Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.
Read More »New O-Band 16-CH DWDM AWG Multi/Demultiplexer is Manufactured by Tier 1 Mobile Network Operator
Enables MNOs to integrate multichannel O-band DWDM capability into the existing lines. Designed for use in 5G-oriented fronthaul optical data transport applications. MNOs equipped with fronthaul optical data transport WDM-enabled C-RAN architecture uses DWDM-overlay-over-CWDM technology for economical 5G deployment.
Read More »New O-Band 16-CH DWDM AWG Multi/Demultiplexer is Manufactured by Tier 1 Mobile Network Operator
Enables MNOs to integrate multichannel O-band DWDM capability into the existing lines. Designed for use in 5G-oriented fronthaul optical data transport applications. MNOs equipped with fronthaul optical data transport WDM-enabled C-RAN architecture uses DWDM-overlay-over-CWDM technology for economical 5G deployment.
Read More »
New Fujitsu Wavelength-Division Multiplexing System Allows the Use of Multiple Wavelength Bands
The Fujitsu Wavelength-Division Multiplexing System is designed for increasing the transmission capacity of optical fibers in optical networks connecting datacenters. This technology converts C-band (1,530-1,565 nm) into new L-band (1,565-1,625 nm) and S-band (1,460-1,530 nm) during transmission and reconverts into original C-band received. It uses two pump lights that generate a signal with...
Read More »
New Fujitsu Wavelength-Division Multiplexing System Allows the Use of Multiple Wavelength Bands
The Fujitsu Wavelength-Division Multiplexing System is designed for increasing the transmission capacity of optical fibers in optical networks connecting datacenters. This technology converts C-band (1,530-1,565 nm) into new L-band (1,565-1,625 nm) and S-band (1,460-1,530 nm) during transmission and reconverts into original C-band received. It uses two pump lights that generate a signal with...
Read More »
Ethernet HART® Multiplexer Allows up to Five Expansion Modules
Ethernet HART® GW PL ETH/-... Multiplexer features head station and HART expansion modules. Unit is designed to parameterize and monitor field devices on an Ethernet network for applications such as partial-stroke testing, valve diagnostics, and batch-data transfers. This unit is embedded with AMS Device Manager software and supports HART IP. HART® multiplexer converts HART parameters into...
Read More »
Ethernet HART-® Multiplexer Allows up to Five Expansion Modules
Ethernet HART® GW PL ETH/-... Multiplexer features head station and HART expansion modules. Unit is designed to parameterize and monitor field devices on an Ethernet network for applications such as partial-stroke testing, valve diagnostics, and batch-data transfers. This unit is embedded with AMS Device Manager software and supports HART IP. HART® multiplexer converts HART parameters into...
Read More »
Acoustic and Thermal Solutions for Original Equipment Manufacturers
Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.
Read More »
