New Multiplexers Products

Optical Switches address Agile DWDM network.

Agile Optical Switches allow service providers to remotely adapt wavelength services to meet changing traffic demand. Wavelength Selective Switch includes 100 GHz and 50 GHz versions, supporting long-haul and metro networks. Colorless routing enables any wavelength to be routed to any port and eliminates need for pre-planning of port usage. Based on planar lightwave circuit, 40-channel ROADM...

Backhaul Products operate at 30, 60, and 300 Mb.

Operating in near and non line-of-sight environments, Canopy(TM) 5.7 GHz OFDM Backhaul units can interconnect cellular sites, replace leased T1/E1 lines, connect access point clusters, serve as backbone for mesh networks, or link corporate and institutional campuses and remote sites. They include multi-beam space time coding, built-in security protection via complex signal with scrambling, and...

I2C Multiplexers provide capacitive buffering.

Dual-wire bus multiplexers LTC4305 and LTC4306 provide capacitive isolation when connecting upstream I2C bus to desired combination of downstream busses. Software-controlled LTC4305 multiplexes 2 channels, while LTC4306 splits I2C bus into 4 sub-branches. Each channel can be pulled to supply voltage from 2.2-5.5 V, regardless of IC supply voltage. Downstream channels are provided with alert...

Multiplexer and DMM/Switch help expand PXI capabilities.

Designed for automated test systems, PXI-2527 electromechanical switch module is 300 V, 32-channel multiplexer that offers switching capacity up to 300 Vdc/Vac CAT I or up to 2 A. It has scan rate of 140 channels/sec and integrates cold-junction compensation sensor. DMM/Switch Express VI for NI LabVIEW extends LabVIEW Express technology to facilitate multipoint DMM operations and synchronization...

Retem System: Breakthrough Technology in Soil Stabilization & Erosion Control

This white paper provides an overview of Retem Systems breakthrough technology.

Integrated Access Devices help carriers migrate to VoIP.

SIP-based Total Access 900 Series allows Incumbent Local Exchange Carriers and Competitive Local Exchange Carriers to implement IP network architecture for VoIP deployment, while supporting customers' legacy equipment. Units are suited for hosted PBX or IP Centrex applications, and can be used as SIP gateway to overlay additional services to customers. Supporting up to 24 analog voice...

Multiplexers enable upgrade to next generation services.

Model MX3112 enables Ethernet migration from traditional TDM voice circuits to EVDO or HSDPA data services. Drop-and-insert Model MX3208/3216 permits single DS3 to be shared among multiple cell sites. Available in 8 and 16 drop port DS1 models, unit features bandwidth managed IP/Ethernet and terminal server ports. Model MX410 allows DS1 to be cross-connected into separate fractional T1 facilities...

Optical Multiplexer targets global markets.

Combining SONET, SDH, and Ethernet service capabilities, OPTI-6100(TM) is equipped to address virtually any access or small metro ring application for carriers around the globe. It addresses needs of service providers seeking to expand service capacity and maximize backhaul efficiency.

Multiplexer facilitates IPTV deployment.

Total Access 1100F enables IPTV and deep fiber connectivity for Total Access OSP and Mini-DSLAMs. It provides standard GigE network connections, content security features, and can also be used as Ethernet aggregation point to optimize transport efficiencies with IP-enabled RT and SAI DSLAMs. Total Access 1100F drives fiber deeper into network, transforming DSLAMs from Internet delivery platforms...

Multiplexer transmits up to 60 km over one fiber.

Fiber optic, digital multiplexer transmits 2-64 channels of uncompressed video, 2-32 channels of bi-directional data and audio, as well as 4 E1 and 100 M Ethernet over single fiber cable. It features ability to add/drop video, audio, RS232/RS422/RS485, E1, and 100M Ethernet ports by plugging in or out service cards. Applications include CCTV, video surveillance, homeland security, and ITS.

Multiplexer Chassis provides up to 12 slots.

Model E1 PDH can combine up to 16 E1 and 4-port Ethernet signals in one fiber channel. With 6U height and up to 24 optical channels, unit is suitable for low capacity, point-to-point remote transmission applications. It includes 48 Vdc power supply, complete alarm functions, one RS232 asynchronous interface, and remote loop back functions.

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.