Multiplexers

PXIe Switching Modules provide signal isolation.
Miscellaneous Switches

PXIe Switching Modules provide signal isolation.

Compatible with 18- and 9-slot 3U PXI Express mainframes and 4-slot portable PXI-hybrid mainframe, SentinelEX PXI Express Switching Modules help maximize performance of measurement instrumentation by reducing false pass/fail errors and intermittent faults associated with marginal signal levels. Products maximize test signal integrity through use of advanced circuit board layout techniques that...

Read More »
PoE Multiplexer supports 2.5 Gbps device installations.
Multiplexers

PoE Multiplexer supports 2.5 Gbps device installations.

With PDS-EM-8100 Power-over-Ethernet Multiplexer, 802.11ac access points with 2.5 Gbps rates can be installed without need to replace Ethernet switch with 2.5G NBASE-T interface. Unit converts 2 ports of 1G into single port with 2.5G NBASE-T interface and 30 Watts IEEE802.3at PoE. Multiplexer is suitable for fast-growing applications such as enterprise IT, with plug and play/zero configuration...

Read More »
Miscellaneous Switches

Analog Switches/Multiplexers feature advanced silicon process.

Replacing aging silicon technology in diverse applications, DGxxxLE and DGxxxxE analog switches and multiplexers are designed on high-density, 18 V process that proffers upgrade path forÂ- those using Vishay 12 V series products. Both ruggedized series feature 16 V operating voltage, minimized reduced leakage and parasitic capacitance, as well as maximized switching speeds, latch-up current,...

Read More »
GPIB-Controlled GPIB Bus Switch automates test systems.
Multiplexers

GPIB-Controlled GPIB Bus Switch automates test systems.

Model 4842B, as multiplexer, lets test system designers automate sharing of test equipment among multiple GPIB controllers.Â- As bus switch, 4842B enables GPIB controller to access 3 GPIB buses and 39 instruments. This lets system designers overcome GPIB bus fanout limit of 14 devices and expands number of accessible GPIB primary addresses. Using 1.75 in. of rack...

Read More »
Preview for Pickering Interfaces for the International Microwave Symposium - San Francisco, CA
Miscellaneous Switches

Preview for Pickering Interfaces for the International Microwave Symposium - San Francisco, CA

RF and Microwave Switching Solutions in both PXI and LXI Formats Will Be on Display Pickering Interfaces, a leading provider of signal switching and conditioning solutions, will showcase their broad catalog PXI of Ethernet LXI RF Microwave switching solutions, including their newly announced PXI RF Multiplexer range (40-760), at the IEEE MTT-S 2016 International Microwave Symposium (IMS) at booth...

Read More »
Multiplexers

PXI 50 Ohm, 600 MHz RF Multiplexers come in 18 configurations.

Featuring automatic terminations to manage VSWR effects, series 40-760 includes dual, quad, and octal SP4T; single, dual, and quad SP8T; single and dual SP16T; as well as single SP32T configurations. RF relay technologyÂ- helps minimize insertion loss and VSWR, while mechanical and electrical design minimizes injection of noise and unwanted signals into signal paths. Compatible with...

Read More »
Radiation Tolerant Multiplexers target space flight systems.
Multiplexers

Radiation Tolerant Multiplexers target space flight systems.

Featuring 3–5.5 V single supply operation with adjustable logic threshold control, 16-channel ISL71830SEH and 32-channel ISL71831SEH provide 5 kV ESD protection, R(ON) of 120 Ω, and propagation delays of less than 100 ns. Devices offer over-voltage protection on per-switch basis to maintain continuous processing of hundreds of telemetry test points. Both multiplexers provide cold spare...

Read More »
PXI Solid State Multiplexer supports hot/cold signal switching.
Multiplexers

PXI Solid State Multiplexer supports hot/cold signal switching.

Suitable for hot or cold switching signals up to ±100 V at 5 A, 40-652 MUX series uses solid-state relays to ensure typical operating time of 85 Â-µsec as well as allow hot switching of signals without any life degradation. Design can switch inductive loads up to stored energy of 20 mJ and withstand 30 A inrush currents for 300 µs when switching...

Read More »
Optical Fibers

SWDM Alliance Formed to Support Duplex Multimode Fiber for Enterprise and Data Center Applications at 40 and 100 Gbps

Organization to drive industry-wide adoption of Shortwave Wavelength Division Multiplexing (SWDM) technology, leveraging data center operators' investments in duplex multimode fiber infrastructure SUNNYVALE, CALIF.Â- – Nine companies today announced the formation of an interest group to drive cost-effective utilization of duplex multimode fiber (MMF) infrastructure in cloud and...

Read More »
PXI Solid-State Multiplexer has versatile, high-density design.
Multiplexers

PXI Solid-State Multiplexer has versatile, high-density design.

Able to sustain 1.5 A for 100 msec on hot or cold switching, model 40-681 may be used whereÂ- high-density MUX array is required that can adapt to different test configuration for different test targets or where test system may need to be reconfigured later on. Selectable switching configurations and architecture versatility enable all multiplexer banks to be interlinked and common...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers