Multiplexers

DWDM Access Transport Platform offers 1.25 Gbps max speed.

TurboLIGHT(TM)16 dense wavelength division multiplexing (DWDM) fiber-to-the-x (FTTx) optical access transport platform acts as passive optical network (PON) system that delivers 20 Gbps of symmetrical bandwidth over single feeder fiber. Based on Lambda-PON(TM) automatic wavelength-locking technology, product carries 16, 125 Mbps to 1.25 Gbps bidirectional data streams using 32 independent...

Read More »
Multiplexing Converter targets tactical market.

Multiplexing Converter targets tactical market.

Featuring modular circuitry, Model CV-MCU2 can be software-configured to perform CDI/NRZ/Fiber conversions or up to 4:1 multiplexing in single 1 RU chassis. Integrated modules support up to five 20 Mbps protocol conversions and can be used to multiplex up to 4 digital trunk groups onto single 16 Mbps aggregate. Tactical user can configure single unit as multiplexer, modem, or combination,...

Read More »

Multiplexer transmits up to 60 km over one fiber.

Fiber optic, digital multiplexer transmits 2-64 channels of uncompressed video, 2-32 channels of bi-directional data and audio, as well as 4 E1 and 100 M Ethernet over single fiber cable. It features ability to add/drop video, audio, RS232/RS422/RS485, E1, and 100M Ethernet ports by plugging in or out service cards. Applications include CCTV, video surveillance, homeland security, and ITS.

Read More »
Multiplexer Chassis provides up to 12 slots.

Multiplexer Chassis provides up to 12 slots.

Model E1 PDH can combine up to 16 E1 and 4-port Ethernet signals in one fiber channel. With 6U height and up to 24 optical channels, unit is suitable for low capacity, point-to-point remote transmission applications. It includes 48 Vdc power supply, complete alarm functions, one RS232 asynchronous interface, and remote loop back functions.

Read More »
Switch Modules offer PXI capability in harsh environments.

Switch Modules offer PXI capability in harsh environments.

Rated 12 A, PXI-2585 and PXI-2586 are single-slot, 3U PXI modules with 10 channels each. Former is configured as 10x1 multiplexer, and latter has 10 independent SPST relays. Both products, rated for voltages up to 300 V ac/dc, can switch up to 3,000 VA in ac applications and feature power levels up to 300 W in dc applications. General-purpose PXI-2564 is single-slot, 5 A, 3U PXI module with 16...

Read More »

Multiplexer provides Gigabit Ethernet and PDH transport.

ETHOS Ethernet Over SDH/SONET device is a fully integrated, single chip, add-drop multiplexer that provides full-rate Gigabit Ethernet and E1/DS1 access in Metro and Access networks. Four line ports at STM-4/OC-12 or STM-1/OC-3 are provided, each supporting direct connection to SFP modules. There are 4 E1/DS1 ports, and 4 Ethernet or Gigabit Ethernet ports on access side, as well as higher and...

Read More »
Optical Multiplexers measure 7.2 x 14.5 x 4.7 mm.

Optical Multiplexers measure 7.2 x 14.5 x 4.7 mm.

Four-channel Model P1X4 and 8-channel Model P1X8 are Coarse Wave Division Multiplexers featuring miniature, multi-layer, thin film filters. They are available with optional connectors to fit wide range of network requirements. Units are suited for Passive Optical Networks, including B-PON, E-PON, G-PON and WDM-PON, SAN, and OADM as well as metro and metro edge networks including LX4 applications.

Read More »
Audio Multiplexer sends and receives signals up to 37 miles.

Audio Multiplexer sends and receives signals up to 37 miles.

Series AT/AR7400 20-bit, four-channel, digital multiplexer allows two stereo or four monaural audio signals to be digitally encoded and transmitted on one optical fiber. Quality of signal is maintained under all optical conditions through maximum optical path loss of 20 dB. Medium-haul performance has 80 dB signal to noise ratio and operating temperature range of -40 to +74Â-

Read More »

Multiplexers have low jitter for communications.

SY100EP56V, SY100EP57V, and SY100EP58V multiplexers have low random jitter and deterministic jitter of less than 1 psrms and 25 pspk-pk, respectively. This meets jitter and skew requirements of SONET/SDH communications systems, high-end enterprise server applications, and ATE systems. All three operate from supply voltage between 3.0 and 5.5 V, and work in -40 to +85Â-

Read More »
DWDM features low insertion loss.

DWDM features low insertion loss.

Standard 16-channel Dense Wavelength Division Multiplexer maintains 3 dB insertion loss over operating temperature of 0 to 60 deg C. Passive athermal performance avoids need for several watts of power to drive heaters or other temperature control devices, and for system monitoring and alarms to signal malfunction of temperature control devices.

Read More »

All Topics