Servo Control comes in 80 x 50 x 17 mm package.
Based on MotionChip(TM) DSP Control Technology, ISCM4805 Intelligent Servo Control Module is designed to embed motion control, drive, and PLC functionalities in one open frame unit. Software-configurable product, offered in stand alone or multi-axis configurations, drives brushless, DC brush, or step motors up to 200 W. Torque, speed, position, contouring, profiling, e-cams, and step motor...
Read More »
DC Drives feature space-saving 35 x 105 mm footprint.
Able to be placed adjacent to other control panel components, non-isolated drives are designed for use with permanent magnet or shunt wound DC motors. Design facilitates access to drive adjustments. Featuring plug-on screw terminals and DIN-rail-mount package, controllers clip into place without further engineering. Power ratings range from 0.55-1.8 kW @ 180 Vdc. Dual voltage supply and...
Read More »
Open Loop AC Drive accommodates PLC functionality.
Available in ratings from 0.3-1, 1.5-3, and 0.5-5 hp, Commander SK features output frequency of 1,500 Hz, ability to hold torque down to 1 Hz, and selectable switching frequencies to 18 kHz. Optional LogicStick enables PLC, and provides memory for customer-specific programs holding approximately 30-50 rungs of ladder logic and function blocks. Drive includes built-in EMC filter and can switch...
Read More »
DC Motor Speed Control has current loop input signal option.
Rated to 2.0 hp, variable speed 250 Series is available with -5 or -7 option board that enables it to accept 4-20 mA current loop reference signal as command for speed control. Its -7 option also offers Auto/Off/Manual selection capability. DC drive is fully rated, with no auxiliary heat sink required, and is available in open chassis version or NEMA 4/12, 4X enclosed cULus Listed package.
Read More »
Understanding Lights Out Manufacturing
This white paper gives an overview of understanding lights out manufacturing.
Read More »
Multipurpose AC Drive features zero-stacking design.
Variable-speed Model GV6000 comes in 7 frame sizes ranging from 0.5-200 hp at 480 V. Removable Operator Interface Module provides metering, programming, and operator control, and contains CopyCat functionality for transferring parameter sets between drives. Model GV6000 incorporates general-purpose control, sensorless vector control, and flux vector control with or without encoder feedback....
Read More »
Motor Controller drives unipolar stepper motors.
Easy-Step(TM) 3000 motor drive and control system drives unipolar stepper motors in full 2-phase, full 1-phase, and half-step modes up to 35 V and 3 A/phase. Direct command set, slave/remote pulse mode, voltage mode, and teach mode operations are all supported. Measuring 63.6 x 26.4 mm, drive also features store and replay; selectable pull-in rate and maximum step rate; and adjustable ramp time...
Read More »
DMOS Microsteppping Drivers have built-in translator.
With output ratings of 35 V and 1.5 A, A3983 and A3984 operate bipolar stepper motors in full-, half-, quarter-, eighth- (A3983), and sixteenth- (A3984) step modes. They combine STEP and DIRECTION interface with 7.8 x 6.4 mm eTSSOP package and feature internal synchronous rectification control circuitry as well as fixed off-time PWM current regulator. Products also provide internal circuit...
Read More »Regenerative AC Drive features single-unit design.
Compact, stand-alone, fully integrated 4-quadrant drive, ACS800-U11, incorporates active supply unit and built-in LCL filter to eliminate high-frequency harmonics. Harmonic performance lets drive help maintain power-supply quality as well as recover energy from process and feed it back into network. Rated from 7.5-125 hp, product incorporates NEMA Type 1 protection, flexible I/O, control panel,...
Read More »
Digital Servo Drive outputs up to 10.0 kW @ 20 A/460 V.
With output power ratings starting at 3.32 kW @ 12 A/230 V, SimplIQ Tuba is offered in six 9.7 x 7.4 x 3.6 in. models. Each features built-in power supply that provides direct ac input from 115-460 Vac @ 50/60 Hz. Operating network functionalities include CANopen DS301, and binary interpreter enables simultaneous CANopen and serial RS232 communications. Intelligent drives come with programmable...
Read More »AC Drives control motors rated from .25 to 3 hp.
Able to be DIN-rail or screw-mounted in control cabinets, ACS50 series ramps speeds up and down and operates motors at optimal speeds for extended periods of continuous operation. Component drives, offered in 3 frame sizes from 2 x 5.75 x 5 in. to 3 x 6.25 x 7 in., control 230 V, 3-phase motors and feature built-in 16 kHz switching frequency for silent operation. Products are available for...
Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.
Read More »
