Servo Motor Controllers and Drives

Servo Drive connects via CANopen interface.

DC201E25A20NAC digital servo drive uses CANopen communications for use in networking applications. Built-in interface complies with DS301 and DSP402 standards. Drive uses DSP to close digital current, velocity, and position loops for controlling brushed or brushless servomotors. Position and velocity loops can use encoder, Hall sensor, or analog feedback. Drive has output of 25A peak, 12.5A...

Read More »
AC Drive is available in 600 Vac rating.
AC Motor Controllers and Drives

AC Drive is available in 600 Vac rating.

GPD 506/P5, rated for 200 HP at 600 Vac, includes keypad and display for input and monitoring of operating parameters. Network communication is provided through RS-232 serial communication port. Drive features momentary power loss override, overtorque and undertorque detection, multi-step speed operation and accel/decel time selection. Protective functions include motor overload, overheat,...

Read More »
AC Drives plug into neworks.
AC Motor Controllers and Drives

AC Drives plug into neworks.

Allen-Bradley PowerFlex(TM) 700 AC drives offer adapters for NetLinx, DeviceNet, ControlNet, Universal Remote I/O, Profibus, and Interbus-S networks. Drives are available in power ratings from 0.5 to 40 hp at 400 to 480 V, and are configurable for volts-per-hertz and sensorless vector applications. They meet global power ratings, packaging requirements and industrial standards including CSA, cUL,...

Read More »
Servo Motor Controllers and Drives

Servo Drive is optimal for use with linear motors.

DR100EE25A20NAC is capable of encoder-based sinusoidal commutation of linear servomotors, with or without Hall sensors. 20 kHz digital current loop utilizes Space Vector Modulation switching techniques for higher current loop bandwidth and low heat dissipation. Drive configuration and tuning are accomplished via graphical Windows-based utility using RS232/485 serial port. Unit accepts supply...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
AC Motor Controllers and Drives

AC Drive controls motors up to 3.7 kW.

PowerFlex 4 is available in power ratings from 0.2 to 3.7 kW and in voltage classes of 115, 230 and 480 volts. It features integral keypad with local potentiometer for control. RS485 communications make drive compatible with DriveExplorer and DriveExecutive software when using serial converter module. Drive is available in IP20 package that can be DIN rail or panel mounted. Zero Stacking(TM)...

Read More »
Motor Controller offers stand alone operation.
Motor Controllers and Drives

Motor Controller offers stand alone operation.

DR16 bipolar step motor controller features programmable full, half, quarter and eighth steps. Motor current is selectable between .03 and 1.5 amps with motor voltages to 48 volts. Velocities can be greater than 55,000 steps per second with 0.001 steps per second resolution. Moves can be absolute, relative, continuous, or alternate. Controller features RS-232 serial port and selectable baud rates...

Read More »
Worm Gear Drives provide ratios from 1:1 to 60:1.
Worm Gears (Gears, Worms and Sets)

Worm Gear Drives provide ratios from 1:1 to 60:1.

DAW Series multi-speed transmissions will shift on-the-fly under full load. Model DAW is rated at up to 50 input HP at 1800 RPM and comes in 4 basic configurations. DAW-S is single input with single output shaft; DAW-SD is single input with dual output shafts that may be solid or split; DAW-DS is single input with dual output shafts and output shafts are coaxial shaft-over-shaft; DAW-SI is single...

Read More »
Intelligent Controllers feature modular designs.
Motor Controllers and Drives

Intelligent Controllers feature modular designs.

SMC-3(TM) 3-phase Smart Motor Controller includes standard overload protection with adjustable trip class, motor and system diagnostics, configurable auxiliary contacts, and multiple start and stop modes. SMC-Delta(TM) reduced voltage starter is designed for star-delta (6-lead motor) applications. It incorporates transitionless start, and combines contactors, overload relays, timers, and internal...

Read More »
Drum Motor Drives drive food conveyors.
Motor Controllers and Drives

Drum Motor Drives drive food conveyors.

Internally powered drum motors are available with USDA Dairy 304 or 316 stainless steel shell, shafts and end flanges that resist corrosion and contamination prohibited in food industry. Each motor is filled with food grade oil and hermetically sealed, making it suitable for applications requiring daily high-pressure washdown and acid or alkaline power washings. Drives have sprockets for driving...

Read More »
Sinusoidal Servo AC Drive has fault monitoring system.
Servo Motor Controllers and Drives

Sinusoidal Servo AC Drive has fault monitoring system.

Brushless Burny ServoPak AC8 is available in two- or three-axis servo drive packages for shape-cutting applications on cantilever or gantry machines using thermal or waterjet cutting. It includes MotionView software that provides users with fast set-up, tuning, and real-time viewing. Diagnostic LED indicators monitor all operating functions. System provides 8 A of continuous output current and up...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics