Kollmorgen to Demo New AKD®2G Servo Drive & AKM®2G Servo Motor System Solution at PACK EXPO 2018
Servo Motor Controllers and Drives

Kollmorgen to Demo New AKD®2G Servo Drive & AKM®2G Servo Motor System Solution at PACK EXPO 2018

Visit Booth N-5251 to see the next generation servo system, mobile & robotic arms, frameless gearmotors, and AKMHTM hygienic motor solution in action RADFORD, VA – September 27, 2018 – Kollmorgen will be exhibiting at Pack Expo, October 14-17, 2018, in Chicago, IL. Attendees are invited to visit booth N-5251 for exciting, new-to-the-show demos of the company’s industry-leading motion...

Read More »
Latest Masterflex L/S Variable-Speed Console Drives are Suitable for General Fluid Transfer Applications
Motor Controllers and Drives

Latest Masterflex L/S Variable-Speed Console Drives are Suitable for General Fluid Transfer Applications

The Masterflex® L/S Variable-Speed Console Drives are compatible on standard, easy-load®, easy-load II, easy-load 3, multichannel, high-performance, cartridge, PTFE tubing, and PTFE-diaphragm pumps. They offer a flow range of 0.42 to 2900 mL/min. The units come with separate power switch that allows user to set speed while turning the drive on or off. The drives sit on a bench or in a fume hood...

Read More »
New STF Series Stepper Drives Electronically Dampens Motor and System Resonance
Stepper Motor Controllers and Drives

New STF Series Stepper Drives Electronically Dampens Motor and System Resonance

The STF Series Stepper Drives are available in STF03 (12 to 48 VDC), STF06 (12 to 48 VDC) and STF10 (24 to 70 VDC) ratings. These units support EtherCAT, EtherNet/IP, CANopen, Modbus, Ethernet and RS-485 protocols and proprietary Serial Command Language. They work on 2-phase step motors and provide current control with an anti-resonance algorithm. The drives allow operator to configure and create...

Read More »
New CVK-SC Series Motor Speed Control System Improves Positioning Accuracy
Motor Controllers and Drives

New CVK-SC Series Motor Speed Control System Improves Positioning Accuracy

The CVK-SC Series Motor Stepper Motor Speed Control System is available in 3 motor sizes and 2 driver types with 24 VDC power input. The system consists of a stepper motor, driver and a programmable controller. The CVK-SC series motor’s settings such as operating speed, acceleration and deceleration time and running current can be set through driver switches. The units offer a speed ranging...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Amacoil Offers Latest Uhing Rolling Ring Linear Drives with New Control Option that Permits Precise Location of End Stops
Motor Controllers and Drives

Amacoil Offers Latest Uhing Rolling Ring Linear Drives with New Control Option that Permits Precise Location of End Stops

Uhing Rolling Ring Model RG Linear Drives are available in axial thrusts ranging from 7 to 800 lb. Units feature a control knob that is mounted on end of each rod. The rotation of the knob enables the end stops to move in fine increments. Unit’s remote control knob allows the operator to position the end stops while the drive is in operation. Uhing drives are suitable for use in winding...

Read More »
Invertek Helps Secure an Efficient and Reliable City Water Supply
AC Motor Controllers and Drives

Invertek Helps Secure an Efficient and Reliable City Water Supply

Securing an efficient and reliable city water supply Clean water is a growing scarce natural resource throughout the world, none more so than in the Middle East where governments and water companies need to reduce wastage and consumption and optimise associated energy use. In one city once famed for its abundance of natural water, demand was placing pressure on the existing water storage and...

Read More »
New OmniPulse DDC Series 2 Drive Improves Performance of DC-Operated Material Handling Applications
Motor Controllers and Drives

New OmniPulse DDC Series 2 Drive Improves Performance of DC-Operated Material Handling Applications

Magnetek’s OmniPulse™ DDC Series 2 Drive features DLS4 data logger that enables user to access run, fault, and alarm histories for a simplified troubleshooting of faults and alarms. The drive is designed for series, shunt, or compound wound motors and is compatible with IMPULSE® Link 5 software that is used for uploading, downloading and monitoring parameters. Unit’s X-Press Programming™...

Read More »
Invertek "Drives" a Hole in One at Italian Golf Course
AC Motor Controllers and Drives

Invertek "Drives" a Hole in One at Italian Golf Course

An Italian golf course has greater control irrigating its greens, thanks to the introduction of Invertek Drives variable frequency drive (VFD) technology, cutting water usage and reducing energy costs as a result. Golf Club Lignano at Lignano Sabbiadoro (www.golflignano.it) had a single 110kW pump and 110kW drive controlling its underground irrigation system serving the 72 hectare, 18-hole...

Read More »
Latest EDD-3701x EtherCAT Motor Controlling Drives have Multiple Digital and Analog Outputs
Motor Controllers and Drives

Latest EDD-3701x EtherCAT Motor Controlling Drives have Multiple Digital and Analog Outputs

EDD-3701x EtherCAT Drives are control brushed, brushless, steppers, and microstepping motors. Units come with 8 digital inputs, 4 digital outputs, 2 analog inputs, and 2 analog outputs. The drives can be configured via EDD-3701x’s USB port using GDK software with the help of its configuration tool process. Units come in a 3.9 x 5.0 x 1.5 in. form factor and can be operated in Cyclic Synchronous...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers