Upconverting Mixers integrate RF transformer.
Electronic Mixers

Upconverting Mixers integrate RF transformer.

Model LT5519 operates over 0.7-1.4 GHz range, while Model LT5520 covers 1.3-2.3 GHz frequency bands without external matching components. On-chip RF transformer enables single-ended output operation for both units. RF port is internally 50 Ohm-matched over full operating frequency range. Built-in LO amplifiers eliminate need for external LO buffers. Operating from 5 V supply, mixers typically...

Read More »
Inclined Agitator eliminates dead spots.
Mixers

Inclined Agitator eliminates dead spots.

Inclined Agitator helps evenly cook high-viscous products and ground meats, eliminating dead spot often found in center of kettle. Slow blender speeds can be used to accommodate gentle products while still mixing thoroughly. Heavy-duty drive can be designed for 2,000,000 cps, and 4 in. flush-bottom ball valve allows for discharge of most products.

Read More »
Processing System emulsifies, blends, and homogenizes.
Impeller / Propeller / Turbine - Agitators / Mixers

Processing System emulsifies, blends, and homogenizes.

Master Plant(TM) consists of complete processing system for pharmaceutical and cosmetic applications, including vessel, piping, valves, controls, and 2 mixers. Integral spiral agitator and high-shear mixing unit, capable of handling viscosities from 1-100,000+ cps, combine to provide complete mixing, homogenization or dispersion, product transfer, and system cleaning. Available with capacities...

Read More »
Rotating Mixer operates at speeds from 4-40 rpm.
Impeller / Propeller / Turbine - Agitators / Mixers

Rotating Mixer operates at speeds from 4-40 rpm.

Model RT10 is capable of mixing 50, 0.5 ml and 48, 1.5 ml centrifuge tubes with snap-on caps or screw down caps in end-over-end motion. Rotator operates from wall-mounted universal power supply, which provides 12 Vdc to unit. Speed control has off position fully counter-clockwise with 270° of rotation between off and full on. Sample holders are available for 16, 15 ml or 6, 50 ml centrifuge...

Read More »
Side-Entering Impeller utilizes hydrofoil design.
Impellers

Side-Entering Impeller utilizes hydrofoil design.

Constructed from 316 stainless steel, 317L stainless steel, Hastelloy C276, or titanium, Maxflo WSE employs hydrodynamic design to improve cavitation resistance. Bolted-blade design is available in 4-blade model or 6-blade model for shock-loaded applications. Applications include industries such as pulp and paper, flue-gas desulphurization, and petroleum blending and storage.

Read More »
Static Mixers offer complete mixing and flow division.
Mixers (Fluid Blending)

Static Mixers offer complete mixing and flow division.

Able to handle pressures over 10,000 psi, Kenics® KM Series mixers feature helical mixing element, which produces complete radial mixing and flow division for any combination of liquids, gases, or solids. Smooth element geometry results in efficient mixing of miscible fluids in laminar or turbulent flow. Products have no moving parts and are offered in fixed-element, removable-element,...

Read More »
Turbine Agitator uses hydrofoil/gas dispersion impellers.
Impeller / Propeller / Turbine - Agitators / Mixers

Turbine Agitator uses hydrofoil/gas dispersion impellers.

Suited for agitator service in applications to 600,000 gal, GT Turbine Agitator features double reduction gear drive and cast iron housing. Suited for indoor or outdoor operating environments, 1Â-½-3½ in. dia GT shafting is oversized and tested to resist maximum torsional loads and bending moments. Product is equipped with NEMA or IEC C-flange motors from 1-30 hp, AGMA-certified...

Read More »
Multi-Gas Mixer blends 2-4 gases into precise mixture.
Mixers (Fluid Blending)

Multi-Gas Mixer blends 2-4 gases into precise mixture.

PEGAS 4000MF blends gasses by utilizing thermal mass flow controllers to provide exact flow of each component gas. System is equipped with internal microprocessor to perform all necessary calculations and provide signals to flow controllers. Front panel rotometer shows flow of mixed gas, and external input for contact closure control shuts off gas flow. With min/max ranges of 0-5 ml and 0-100...

Read More »
In-Line Mixer handles batches as small as 85 ml.
Impeller / Propeller / Turbine - Agitators / Mixers

In-Line Mixer handles batches as small as 85 ml.

L-Series Hi-Shear Mixer for emulsions, dispersions, and fine suspensions, provides continuous homgoenous output down to 1 micron and eliminates need for tanks. Mixing head features 1-12 shear-action zones consisting of high-speed rotors and stators, which can produce shear rates of 200,000 per second each. Modular design facilitates scale-up from laboratory to production requirements. Made from...

Read More »
Active Mixer suits wireless and cable applications.
Electronic Mixers

Active Mixer suits wireless and cable applications.

LT5522 active downconverting mixer has RF input with on-chip transformer that is 50 ohm matched over wide frequency range. RF input and Local Oscillator (LO) ports can be driven differentially or single-ended with minimum external impedance matching components. Mixer provides third-order intercept performance of 25 dBm @ 900 MHz and 21.5 dBm @ 1.9 GHz; draws 56 mA supply current at 5 V; and comes...

Read More »

All Topics