New Mixers Products

Active Upconverting Mixer offers 1.5-3.8 GHz dynamic range.

Model LT5579 has frequency range covering .9 GHz cellular bands as well as 2.6 and 3.5 GHz WiMAX frequency bands. At 2.14 GHz, it offers 27.3 dBm output IP3 linearity and 9.9 dB noise figure. It can be driven with signal levels at as much as -5 dBm without elevating its output noise floor above -158 dBm/Hz. Suited for wireless transmitters in basestations, double-balanced mixer operates from 3.3...

High Shear Mixer targets process industries.

Incorporating rotor/stator configuration to promote dual flow through Delta rotor/stator, PM Model offers 15-30 minutes typical cycle times. Designed as batch mixer, it is mounted on conventional air/oil hydraulic lift system, and offers rapid incorporation of powders. Several models are available from 5-200 hp. Intended for use in agglomerate reduction and production of fine emulsions, unit...

Hosedown Stations safely blend steam and cold water.

STVM-iLoc steam/water hosedown stations provide hot water by blending steam and cold water to required set temperature for washing down walls, floors, process equipment, and vehicles. Automatic station shutdown turns off system if temperature is raised 15Ã-

Planetary Mixer handles high-viscoity paste materials.

Featuring 316 stainless steel construction and polished to 150 grit finish, Single Planetary Mixer is available in wide range of sizes from 1-300 gallon capacity. Unit is equipped with custom helical mixing blade as well as air/oil hydraulic lift to raise and lower agitator from mix vessel. Providing dust tight operation with numerous charge and sight ports, mixer includes NEMA 4 control panel...

Pressure Vessels & Their Components

This white paper provides an in-depth look into custom fabricated pressure vessels and their components.

Single Planetary Mixer handles high-viscosity materials.

Featuring stainless steel type 316 construction polished to 150 grit finish, single planetary mixer is equipped with custom helical mixing blade that allows mixing of high-viscosity paste materials. Unit incorporates multiple charge and sight ports and is built for dust-tight operation. In addition to NEMA 4 control panel purged for Cl1 Div 1 hazardous areas, features include air/oil hydraulic...

Top-Entering Agitators offer modular design package.

Model 20 HT/GT agitators include high-efficiency cast gearbox with heavy-duty output shaft and bearings as well as standard cast dry well seal that eliminates lubrication oil leakage from gearbox. Devices are designed to meet AGMA, OSHA, ANSI, IEC, DIN, EU, and ATEX standards and requirements. Also featuring reversible rotation, they are available in right angle and parallel shaft configurations,...

Double Discharge Doors For Twin Shaft Mixers

The Sicoma Company, of Italy, has announced the introduction of DOUBLE DISCHARGE DOORS on its line of twin shaft mixers. This is the first time that such a feature has been available on this type of mixer; it is an important development that improves plant efficiency as well as cost, both for precast and ready-mix operations. Horizontal pan mixers are well known for their ability to discharge...

Miniature Rotary Batch Mixer has 5 ft-³/500 lb capacity.

Model MX-5-SS blends ingredients in ratios as extreme as 1 ppm with 100% uniformity in less than 3 min, regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch components. Rotating drum with proprietary mixing flights gently tumbles, turns, and folds material. For complete evacuation with no residual material, rotating vessel and internal flights lift and...

Coolant/Lubricant Mixing Station can be manual or automatic.

Manual Mixing Station (MM-S) and Central Supply Mixing Station (CSM-S) are designed for blending and dispensing of cutting and forming fluids in manufacturing. Automated mixing and supply of fluids and lubricants to one or more machining or metalforming stations results in consistent concentration ratios. While CSM-S produces concentration ranges from 0.5-37% and delivers up to 3 gpm, MM-S has...

High Shear Mixer features inline design.

Suited for use in laboratory and pilot plant development efforts, Model 400DL consists of 1-3/8 in. dia rotor which is driven by 1 hp motor at speeds up to 10,000 rpm. Mixer is offered with attached 2.5 gal mix vessel and range of stator heads including slotted, round hole, fine screen, and Quad (4-stage) designs. All wetted surfaces are constructed in 316 stainless steel and special seals are...

Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor

As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.