Dischargers

Hydraulic Discharge Press

Jaygo has an innovative Hydraulic Discharge Press system that is required to discharge product from mix bowls if the product is not free flowing and cannot be discharged by gravity. Jaygo Hydraulic Discharge Presses are an essential accessory for the Planetary Mixer and in some cases for the Single, Dual, and Multi-Shaft Mixers. Utilizing this system, products can be easily packed into...

Read More »
Mixers

Novamix Granulator

The Novamix Granulator is a high intensity mixer designed to intimately mix, disperse, wet, and granulate powders for the cosmetic and pharmaceutical industries. The primary design of the Novamix is a Tulip" shaped mix bowl and specially configured Main Impeller and Breaker. Most granulators include the following: Stainless Steel construction; Mirror Polished product contact parts; Jacketed mix...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Double Arm Sigma Blade Extruder Mixers

Jaygo's innovative Extruder Mixer is designed to handle difficult to discharge products such as hot melts and butyl sealants, as well as other medium to high viscosity pastes. This type of mixer combines the action of the Double Arm Sigma Blade Mixer with an extrusion screw placed in the lower part of the mix trough. During mixing, the extrusion screw is run in reverse which imparts a third...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Double Arm Sigma Blade Mixers

Jaygo has an innovative Double Arm Sigma Blade Mixers are engineered specifically for kneading, mixing, and homogenizing wet, pasty, and highly viscous products. The two Double Arm Sigma shaped blades, which sit horizontally and parallel at the bottom of the mixing trough, provide thorough mixing. The blades rotate at different speeds in opposite directions causing the product to be transferred...

Read More »
Mixers

Dual & Multi Shaft Mixers

The Jaygo Dual Shaft Variable Speed Disperser is designed to disperse medium to highly viscous paste products. It has both a low speed heavy duty mixing blade, or full sweep agitator, and high-speed, high-shear dispersing blade. The heavy duty blade moves the material from the container wall to the work zone of the high shear blade. Available in single or dual motor drives, through the floor...

Read More »
Homogenization Tester evaluates in-line process feasibility.
Impeller / Propeller / Turbine - Agitators / Mixers

Homogenization Tester evaluates in-line process feasibility.

Suited for manufacturers of dispersions, emulsions, and slurries, Sanitary Homogenization Test Laboratory evaluates particle size reduction and de-agglomeration manufacturing processes. System utilizes dynamic in-line mixer or high shear colloid mill featuring rotor-stator mixing technology that exposes 100% of product to same shear action, with no bypass. Comprehensive test report with...

Read More »
In-Line Mixer facilitates powder induction in liquid stream.
Impeller / Propeller / Turbine - Agitators / Mixers

In-Line Mixer facilitates powder induction in liquid stream.

Suited for rapid introduction of difficult to wet solids, In-Line SLIM Solid-Liquid-Injection-Manifold System combines mixing of powders and liquids simultaneously by injecting powders directly into high-shear rotor/stator mixer, where powder is immediately dispersed into liquid stream. System includes progressive spiral porting, which enables it to operate without pump or eductor, providing...

Read More »
Control Panels

ITT Wins Multiple Orders at Little Patuxent Water Reclamation Plant

CHARLOTTE, N.C. - February 10, 2010 - ITT Corporation, a global leader in the transport and treatment of water and wastewater, announced it has been awarded multiple orders at the Little Patuxent Water Reclamation Plant in Howard County, Maryland for its Flygt, Leopold, WEDECO and Sanitaire product lines. As part of the Chesapeake Bay Initiative, Little Patuxent Water Reclamation Plant will...

Read More »
HIgh Capacity Mixer/Unloader stabilizes wet scrubber cake.
Impeller / Propeller / Turbine - Agitators / Mixers

HIgh Capacity Mixer/Unloader stabilizes wet scrubber cake.

Featuring corrosion resistant 316L stainless steel construction, 400 ton Pin-Paddle mixer/unloader has specially designed nozzle arrangements to wet ash with precisely regulated volume and distribution of water, providing homogenous mix and functional dust suppression. It has large inlet opening to accommodate multiple feeding belt conveyor lines. Rubber timing belt maintains constant output...

Read More »
Gear-Driven Mixers are engineered for extended life cycles.
Impeller / Propeller / Turbine - Agitators / Mixers

Gear-Driven Mixers are engineered for extended life cycles.

Clamp or cup plate mount Series JG, angle-riser mount Series JGR, and flange mount (with shaft seal) Series JGF are portable mixers that employ heavy helical gears for powerful mixing to 350 rpm. While clutchless construction promotes extended life and slip-free operation, grease-filled gearbox eliminates leaking and danger of oil contamination in process. Totally enclosed fan-cooled (TEFC),...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics