Microcontroller has clock speed of 40 MHz.
VERSA 1000 (VRS1000-40), 8-bit, 8051-based microcontroller offers In-System Programming (ISP) capability. Unit can serve as controller for applications that require up to 36 I/O pins and 64 K Flash memory for program, data, or both. On-chip Flash memory can be programmed in either serial or parallel interface with ISP feature. Available in 44-PLCC and 44-QFP packages, unit is multiple sourced and...
Read More »
Motion Controller supports CAN-based networking.
Model XMP-SynqNet-PCI provides 100 Mbps, real-time, synchronous networking for up to 32 axes. Servos can be updated as quickly as 20 kHz for 4 axes, or 10 kHz for 8 axes. SynqNet also supports user-defined I/O CAN-based networking under industry operating systems such as Windows NT, Windows 2000 and 95/98, VenturCom, and VxWorks. Powered by 32-bit floating point Analog Devices SHARC DSP, heart of...
Read More »Microcontrollers offer up to 1 Mbyte flash memory.
M32R/ECU 32-bit microcontrollers are designed for controller area network (CAN) automotive applications. With clock speed up to 80 MHz, they operate throughout temperature range of -40 to +125Ã-
Read More »
Mixed-Signal Microcontroller is offered in tiny packages.
Model C8051F311 is available in tiny 5 x 5 mm 28-pin Micro Lead-Frame Package (MLP). Measuring 0.9 mm in height, package is compatible with standard surface mount production equipment. Microcontroller has high throughput 25MIPS 8051 CPU, 16 Kbytes Flash memory, and 25 I/O pins. Offerings include on-chip debug circuitry that facilitates full-speed in-system debug features such as single-stepping,...
Read More »
MAXPRO® High-Pressure Custom and Standard Systems
At MAXPRO® Technologies, we welcome the opportunity to design a system to meet your specific system requirements. From boosting gas pressure for molding baby bottles to scavenging helium gas from decommissioned missile tubes to research laboratories, our team of high-pressure engineers and technicians bring a wide range of experience to the table when developing solutions for your high-pressure challenges.
Read More »
pH/ORP Controllers offer dual inputs.
Offered in prewired NEMA 4X wall mount package, WDP Series controllers accept 2 electrode signals in any combination of pH and ORP. Their 4 control outputs may be used as on/off control relays or pulse proportional outputs. Each control output can be assigned to either electrode, and relays can be either high or low set point, high or low alarm, in-range or out-of-range alarm, or probe wash....
Read More »
Microcontroller connects to CAN bus.
C8051F040 mixed-signal microcontroller has analog and digital peripherals, pipelined 8051 CPU, 64K bytes programmable FLASH and 4352 bytes RAM, and CAN 2.0B network controller. Peripherals include two 12-bit DACs, 12-bit 100 kSPS ADC, Ã-
Read More »
Fluid Monitoring System provides product security.
ACCU-GUARD II Compact controls up to 6 products to 6 dispensing points, and can be programmed for quarts, gallons, or liters. It controls tank totals and reorder levels, providing stock inventory with Ã-
Read More »
Motion Control Card controls up to 48 motors.
Model cPCI-8168, 6U CompactPCI, 8-axes motion control card can integrate into 6 systems cards. Hot swappable features allow maintenance without affecting live systems. It offers differential input/output signals, command output options (DIR/OUT and CW/CCW), and various operation modes. Additional offerings include incremental encoder interface, 28-bit counter, and software drivers. Card is...
Read More »
Peripheral Board adds 4 serial ports to controller.
4Serial/Parallel board is for use with LogicFlex controller. Powered by 25 MHz Intel 386Ex microprocessor, LogicFlex offers over 40 digital I/O lines, 10Base-T Ethernet port, Xilinx in-circuit programmable CPLD, 512 K SRAM, and 512 K Flash memory. For multiple serial port applications, 4Serial/Parallel board provides flexibility of adding 4 serial ports and parallel port, allowing system to...
Read More »
Automation Controller offers servo and stepper modules.
Servo modules, for web enabled 5100 Series Blue Fusion(TM) controller, provide multi-axis control for up to 6 1/2 axes (6 full axes plus encoder input) per controller unit, position loop rate of 250 microsec, and encoder feedback rate of 6 MHz, with resolution of 1 count/sec. Blue Fusion stepper modules support microstepping control with step rates to 1 MHz, with resolution of Ã-
Read More »
Increase Workplace Safety, Manage Heavy Loads with Equipment from A-Plus Warehouse
A-Plus Warehouse carries a wide selection of commercial and industrial material handling equipment at affordable prices. Check out the video to learn more.
Read More »
