Connection Box supplies 12 V, 200 mA for up to 32 cameras.
Model 609TB allows connecting cameras, video monitors, and digital I/O signals to frame grabbers. Signal connections between frame grabber and box are via flat cables. Thirty-two BNC's connect composite video to frame grabbers. Transorb diodes protect each input from power surges. Eight real-time video outputs are available for display on video monitors. Thirty-two electromechanical relays switch...
Read More »Microcontroller has dual 1MSPS 16-bit ADCs.
Mixed-signal flash microcontroller model C8051F060 incorporates two 16-bit one million samples per second A/D converters. Successive-approximation ADCs are accurate to 1 least significant bit integral non-linearity, and have 89 dB SINAD. Consuming 20 mW per ADC, devices have 25 MIPS 8051 CPU, 64 Kbytes Flash memory, 4352 bytes RAM, and are packaged in 100- or 64-pin TQFP. Unit has on-chip debug...
Read More »Development Kit facilitates microcontroller design tasks.
PICKit(TM) 1 Flash Starter Kit is a programmer, evaluation, and development kit for use with company's 8- and 14-pin Flash-based microcontrollers. Printed circuit board features USB-powered programming tool that runs on PC. Evaluation area features 8 LEDs, potentiometer, switch and sample 8-pin PIC12F675 Flash device. Development area features snap-off prototype board that enables users to...
Read More »
Controller allows simultaneous multi-user access.
WebMasterÃ-® GI General Industrial Controller combines pH/ORP and conductivity products with WebMasterÃ-® communications platform. ShoulderTapÃ-® Server-On-Demand technology allows real-time access to system parameters. Controller delivers e-mail notifications for alarms and system summaries. It offers 4 sensor inputs, 8 analog inputs, 9 digital inputs, 4 analog outputs, and 8 relays....
Read More »
5 Common Liquid Injection Molding Mistakes (And How to Avoid Them)
This guide offers insights about steering clear of common LIM problems and maximizing your project's efficiency.
Read More »
Embedded Controller includes 320 x 240 pixel display.
Model QVGA Controller(TM) consists of C-programmable embedded computer with touchscreen-controlled GUI on 1/4 VGA display. It commands eight 12-bit analog input channels, eight 8-bit analog inputs, eight 8-bit D/A lines, 24 digital I/O, 4 high current drivers, and two RS232/485 ports. Unit features real-time multitasking operating system, hundreds of pre-coded device drivers, 512 K Flash and 512...
Read More »I/O System offers modular design.
Model ADAM-8000 Distributed Control I/O System can be configured with CPU, communication interface, and various I/O modules. It supports Profibus, DeviceNet, Interbus CanOpen and Modbus modules. System is configurable as remote I/O system through Fieldbus networking. With distributed type, multi-function and flexible communication, ADAM-8000 can be installed in factory automation, motion control,...
Read More »
Communications Controller features integrated web server.
Model ADAM-6500 includes 206 MHz StrongArm CPU, 32 MB DRAM, Compact Flash slot, 10-32 Vdc input power, 10/100 BaseT Ethernet port, and 5 serial com ports. It offers text-based web pages with 1-touch web page generation, and provides TCP/IP support via integrated RJ45 Ethernet port. Integrated web server works with any PC via Internet Explorer, and integrated OPC server connects to remote OPC...
Read More »
Controllers suit factory automation applications.
PACSystems(TM) feature single control engine and universal programming environment, which provides portability across multiple hardware platforms. They support distributed I/O through standards-based communications networks. Offering up to 10 MB of memory, PACSystems RX7i is VME64 based and supports all standard VME modules. CIMPLICITYÃ-® Machine Edition(TM) software provides universal...
Read More »Monitoring/Control/DAQ System offers self-paced learning.
SNAP Ultimate I/O Learning Center gives users hands-on experience configuring I/O points, reading and writing to those points, writing simple control strategies, and building GUIs. Product includes SNAP Ultimate processor and assorted I/O modules, as well as SNAP rack, power supply, load panel, and cables. Product also comes with software applications and utilities such as ioControl(TM),...
Read More »
Motion Controller includes full PC functionality.
Stand-alone motion controller, eXMP-SynqNet(TM) utilizes dual-processor architecture with scalable CeleronÃ-® processor running VxWorks, embedded NT, or other real-time operating systems along with XMP family SharcÃ-® DSP motion co-processor. Unit includes Ethernet, up to 4 COM ports, and on-board flash memory. It supports CAN networking for integrated I/O programming using Motion...
Read More »
Industry Leading OEM with over 65 Years of Experience
Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.
Read More »
