Lubricants

PolySi® Lubricants Adds Australia and New Zealand Distribution

Sanford, NC - PolySi® Lubricants, a division of PolySi® Technologies, increases its global presence with the addition of Superior Lubricants of Australia as a distributor. Due to growing demand in Australia and New Zealand for silicone and synthetic lubricants, PolySi® Lubricants has added Superior Lubricants to meet local market needs. “PolySi® Lubricants is excited to...

Read More »
Extended-Life Cutting Fluid improves metal machining productivity.
Metalworking Fluids

Extended-Life Cutting Fluid improves metal machining productivity.

Coolcut S-50™ soluble cutting fluid improves cutting tool lifeÂ- and reduces heat buildup and friction on workpieces. EP additives provide extra lubricity to cut such materials as high tensile steel and stainless steel and titanium as well as such other metals as aluminum and copper alloys. Forming stable emulsion, fluid will increase feed, cutting speed, and production while also...

Read More »
Drill Rod Grease features biobased formula.
Grease

Drill Rod Grease features biobased formula.

Designed to meet demanding requirements of drilling and mining industry, Biobased Drill Rod Grease offers optimized water washout properties and is almost entirely made of renewable biobased materials with no heavy metals. Product has environmentally safe additives to increase mass density, and is effective in and around high water-flow with balance of adhesiveness and cohesiveness. Using...

Read More »
Lubricating Oils

Phillips 66 Lubricants Announces New Non-Toxic Claim to Uniguide II(TM) Lubricant

New Claim Allows Premium Ashless Saw Guide Oil to Be Used in Environmentally Sensitive Areas HOUSTON - Phillips 66 Lubricants, one of the largest finished lubricants suppliers in North America, today announced an additional non-toxic claim to its Uniguide II™ lubricant product.. This premium quality oil is specially developed to provide optimum lubrication of saw guides and saw blades in...

Read More »
Metalworking Fluids

Bombardier Aerospace Approves Fuchs Metalworking Coolant

FUCHS LURBICANTS CO. and its parent company, FUCHS PETROLUB SE, are pleased to announce the BOMBARDIER approval of ECOCOOL SYN 2175. BAMS 569-001 authorizes the use of ECOCOOL SYN 2175 for operations including, but not limited to, boring, turning, milling, grinding and non-assembly drilling, reaming and countersinking. ECOCOOL SYN 2175 is a fully synthetic water miscible aerospace emulsion...

Read More »
Metalworking Fluids

Safran Approves Fuchs Metalworking Coolant

FUCHS LURBICANTS CO. and its parent company, FUCHS PETROLUB SE, are pleased to announce the SAFRAN approval of ECOCOOL S 761 B. The new approval authorizes the use of ECOCOOL S 761 B in the manufacturing of Messier, Bugatti and Dowty landing gear, nonassembled steels UTS < 1380 MPa and aluminum and titanium alloys. ECOCOOL S 761 B is a high performance soluble oil coolant with outstanding sump...

Read More »
Metalworking Fluids

Metalworking Fluid supports both machining and grinding.

With low foaming characteristics, CIMPULSE™ 49MP is recommended for turning, drilling, reaming, boring, tapping, and grinding of most metals. Oil-containing, multi-purpose fluid is optimal in hard water situations and leaves light, manageable residue. In addition, fluid offers DCHA-free chemistry, optimized sump life, and reduced concentrate consumption and carry-off.

Read More »
Lubricants

Full-Synthetic Lubricants use nGTL technology.

Using natural gas-to liquid-technology, Synplicity™ Lubricants have virtually none of the impurities found in crude oil, such as sulphur, aromatics, and nitrogen. Products adhere to metal at molecular level, extending lifetime of bearings, gears, and other parts. Formulations are fortified with anti-wear and anti-corrosion additives to provide maximum protection against friction and oxidation....

Read More »
Metalworking Fluids

Low-Oil Emulsifiable Coolant lowers usage rates in metalworking.

To meet health, safety, and performance demands in metalworking industry, QUAKERCOOL® 740 can alleviate issues, suchÂ- as coolant becoming destabilized and rancid, while providing the proper lubrication for machining and grinding operations. This low-oil containing emulsifiable coolant does not have any added chlorine, sulfur, boron, secondary amines, formaldehyde, or phenolic...

Read More »
Walter to Feature Advanced Cutting Tool Technologies at IMTS '16
Cutting Tool Inserts

Walter to Feature Advanced Cutting Tool Technologies at IMTS '16

Waukesha, WI — Walter, a leading cutting tool manufacturer, will showcase its latest technologies in Booth W-1700 at IMTS ’16, September 12-17, 2016, McCormick Place, Chicago, IL. Highlights of the exhibit will include the Walter M4000 program which uses an innovative insert system that has a single, basic shape compatibility with every M4000 body. The inserts can be used in all tools within...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers