High Performance Coolant for the Pipe Threading Process
Quaker Chemical gains efficiencies on tooling costs and solves coating incompatibilities with QUAKERCOOL® 750 TP CONSHOHOCKEN, Pa.,- – For many pipe manufacturers, annual threading tool costs can be ten times or more than the annual costs of the coolant. Quaker Chemical Corporation (NYSE: KWR), the only front to back" chemical specialty supplier to the Tube and Pipe industry, addressed the...
Read More »
Champion Racing Oil Revs Up With SuperFlow Dyno Promotion
Clinton, MO- – Champion, a recognized leader in purpose-built racing and enthusiast lubricants, announced today a special promotion in conjunction with SuperFlow Dynamometers and Flowbenches. Geared towards the Engine Builder", "Machine Shop" or "Dyno Facility", Champion is offering through the month of March a $1000 Gift Certificate towards any new SuperFlow engine or chassis dyno system....
Read More »Dana Features Innovations Designed to Improve Fuel Efficiency, Optimize Performance at Technology & Maintenance Council's 2015 Annual Meeting
NASHVILLE, Tenn.- – This week at the Technology Maintenance Council's 2015 Annual Meeting, Dana Holding Corporation (NYSE: DAN) will exhibit a range of products optimized for engine downspeeding, along with additional drivetrain technologies aimed at increasing efficiency and fuel economy. With a focus on decreasing the total ownership costs of line-haul trucks and other heavy-duty,...
Read More »Sullair Unveils New and Improved Formulation SULLUBE
Sullair and Dow Conduct Training Sessions with Distributors to Launch the New Premium Lubricant Chicago, IL — Sullair, an industry leader in innovative compressed air solutions since 1965, today announced the launch of the newly enhanced Sullube® air compressor lubricant, produced by The Dow Chemical Company. Used in more than 50,000 compressors around the world, Sullube is a high-performance...
Read More »
Johnny Dean Uses Magnalube-G
Briefing about the constant breakdowns of trailer hubs, trucks, and boats due to high temperatures, excessive braking, and salt water infiltration, this paper describes how Mr. Johnny Dean benefitted by using PTFE based Magnalube-G. Magnalube-G's performance in high temperature is highlighted, and how the reduction of wear and tear of the parts which are constantly exposed to dirt and humidity is explained. The reduced penetration of salt water into the exposed parts is also reported. The paper concludes with Mr Dean's comment on frequency of using Magnalube-G for better performance in offshore boats, farm equipment, saltwater reels, and any equipment which has a grease fitting.
Read More »Champion Oil Announces Price Decrease on Select Motor Oils and Lubricants
Clinton, MO- — Champion Oil, a major player in development and manufacturing of semi-synthetic and full synthetic motor oils, announced that effective February 6th, 2015 there will be a general posted price decrease of branded motor oils and lubricants by up to 3.5% on select SKU's. Champion is pleased to be one of the first in announcing the decrease costs of our products to the market,"...
Read More »Bombardier Approves QualiChem Water-Based Cutting Fluid
SALEM, Va.- – QualiChem has recently received full Bombardier approval for XTREME CUT 250C. The Bombardier approval, BAMS 569-001, includes Classes A, C and D for lubricants and coolants. The approval certifies that XTREME CUT 250C meets Bombardier’s standards of quality and reliability. In addition to Bombardier, XTREME CUT 250C has also been approved by Boeing to the BAC 5008 specification...
Read More »
Synthetic Motor Oil provides optimized engine protection.
Featuring MaxLife technology, Full Synthetic High Mileage Motor Oil guards against 3 major causes of engine stress: heat, deposits, and wear. In addition to providing anti-wear film, product is proven to excel in numerous categories, including reduced fuel consumption, emissions system compatibility, and suitability for all model years.
Read More »
Cold Heading Oils
Innovative solutions for your process Among a wide range of lubricants dedicated to the requirements of Cold Heading Machinery, CONDAT will present at the Fastener Fair Stuttgart Exhibition, new solutions to provide high duty lubrication with optimum safety. For cold heading and warm heading operations, CONDAT has developed a complete offer adapted to each step of the transformation process for...
Read More »Champion Racing Oils Now Available at Stinnett Automotive and Racing
Champion Oil, a major player in development and manufacturing of racing and performance products, announced today that Stinnett Automotive and Racing headquartered in Emporia, Kansas now offers the complete line of Champion Racing Motor Oils, Chemicals, Additives, and Lubricants. It is extremely important for Champion to identify an engine builder that shares the same goals and has the ability to...
Read More »INOLEX's Lexolube(TM) Food Grade H1 Oils HALAL Certified
INOLEX, Incorporated (Philadelphia, PA) has received certification that the company's food-grade synthetic base oils meet the requirements of Halal Certification as established by the Islamic Food and Nutrition Council of America (IFANCA). IFANCA Halal Certification provides an independent, third-party quality step, assuring food processors that a company's products meet stringent hygiene...
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
