New PL40 Penetrating Lubricant Offers Protection Against Metal Oxidation
PL40 Penetrating Lubricant is suitable for frozen moving parts such as hinges, joints and solenoids. The lubricant reduces friction between mechanical parts and is safe to use around plastic. Product removes moisture and inhibits corrosion on electronic and electrical components.
Read More »
What is the Dry Time of P-80®? (And, Why it Matters)
What is the dry time of P-80®? (And, why it matters) Why does dry time matter? P-80® lubricants are temporary assembly lubricants. When P-80 is wet it provides the needed lubrication to reduce the friction of rubber parts during assembly. Once P-80 dries the lubrication ceases and parts stay in place. Some assembly applications may benefit from using a quick-drying lubricant. This is often the...
Read More »All-Purpose Lubricant displaces and repels moisture.
Available in 8 oz aerosol can or 1 gallon pour can, B'laster All-Purpose Lubricant is designed to lubricate moving parts such as window tracks, hinges, valves, wheels, rollers,Â- glides, and gears. Product also reduces friction and noise, prevents further rust and corrosion, and frees rusted or stuck tools and parts such as nuts, bolts, chains, and locks. With ability to displace...
Read More »Aerosol Lubricants feature 2-way integrated actuator.
Placed on all CRC NSF H1 aerosol lubricant products, Perma-Lock™ 2-Way Integrated Actuator will not detach and has no-slip grip. Flip straw locks into place, eliminating lost straws. Actuator delivers wide spray with straw in down position and precision spray with straw in up position. In addition, cans are labeled for OSHA GHS requirements as well as CPSC Retail requirements.
Read More »
The Next Wave of Intelligent Design Automation
In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.
Read More »Plunger Lubricants and Robotic Greases suit die casting uses.
Formulated for aluminum die casting operations, PLUNGER SLICK™ 200T and PLUNGER SLICK™ WB10-T provide optimized boundary protection for plunger tips and shot sleeves. Key benefits include strong adherence to plunger tip, extended tip and sleeve life, and clean and bright castings. Featuring semi-fluid consistency, QUAKERTEK™ AXIAL 00-32 and QUAKERTEK™ LS 032B-EP are lithium type greases...
Read More »
Boron Nitride Aerosol utilizes non-flammable solvent.
Applied at room temperature, Boron Nitride Aerosol Lubricoat®-NF is based on Necosolv™ non-flammable solvent system with green Solstice™ HFO-1234-ze propellant. Once dry to touch, product can be used from cryogenic temperatures up to 1,000°C in air, 1,400°C in vacuum, and 1,800°C in inert/nitrogen atmospheres. Product provides non-stick release, is electrically...
Read More »
Dual-Action Penetrant/Lubricant is VOC-compliant in all 50 states.
Dual-action penetrant and lubricant with PTFE, Zep® 45 DualForce™, penetrates into tight spaces to loosen stuck parts and lubricates to protect surfaces.Â- With
Read More »
Forging/Dry Film Lubricant protects die and increases life.
Effective at temperatures up to 750°F and suitable for cryogenic conditions,Â- McLube MoS2-900 chemically and thermally stable, water-based molybdenum disulfide forging lubricant and bonded dry film lubricant is also suited for use as general-purpose dry lubricant as well as run-in lubricant. Dry lubricant coating, after evaporation of...
Read More »
PTFE Dry Lubricant Coating requires no baking or curing.
Colorless and non-flammable, MAC-444NPB is suitable for use on metal, plastic, wood, ceramic, and elastomeric surfaces. Product is chemically inert, thermally stable from cryogenic to 500°F, and will bond to applied surface. Containing no oil, grease, soap, wax, or silicone, coating is suitable for use in medical and food applications as dry film lubricant, assembly aid, and as mold release...
Read More »Thermoplastic Extrusion Enhanced with Specialty Lubricants
Thermoplastic extrusion applications are being improved with external lubricants used on the dies or nozzles shaping extruded products. With Huron Technologies' release agents precise color and consistent surface quality products can be delivered. At the same time, release agents also protect the nozzles or dies being used and allow quick, easy cleanup afterwards. In an on-going effort to provide...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
