New Loaders Products

Horizontal Machining Center includes pallet automation.

Horizontal Machining Center, Model FA450-III can be paired with high-speed rail guided vehicle and pallet storage system to form complete metal-cutting cell. Three-level stocker system allows unmanned machine loading and lights-out production. Due to modular design and virtually unlimited capacity, additional machines, loading stations, and up to 120 pallets can be added without interrupting...

Sight Glass Loaders facilitate material changes.

Pulsomax series, which includes models C1E, C1K, and D1K, provides means of loading small quantities of materials directly into process equipment. Available with electric and pneumatic options, series incorporates site glass for viewing of material status. Unit is mounted directly at throat of machine and offers throughput of 650 lb/hr. Series includes Polymax plastic dust filter and control box...

Level Loader can be fed with hand pallet truck.

Designed for manual loading/unloading of pallets, Roll-On(TM) helps reduce worker fatigue. Platform lowers to floor height for pallet placement/removal via hand truck. Incorporated turntable allows users to rotate loads so they always load/unload from near side. Unit can be accessed from all 4 sides with minimum stretching or reaching. With 2,500 lb capacity, product is equipped with...

Auto Loading System suits centerless grinding machines.

Auto Loading and Unloading System handles shafts ranging in length from 150 mm up to 1 m. Shafts are kept on inclined table where pneumatic cylinder feeds one shaft at a time to belt conveyor, which then feeds shaft to centerless grinding machine. After grinding, unloading belt conveyor takes shaft out and turns it around using transfer station. Shaft is then fed to another belt conveyor for...

Regulatory Labeling & the Cost of Compliance

This ebook shows an overview of the regulatory labeling and the cost of compliance.

Skid Steer Loaders feature vertical lift linkage.

Model 252B features 2,500 lb capacity and net power of 70 hp, while 78 hp Model 262B offers 2,700 lb capacity. Both are equipped with Cat 3044C DIT 3.3 liter engine and provide max travel speed of 11 mph. Model 242B employs turbocharged Cat 3024C T engine, and Model 232B uses 3024C engine. Hydraulic system includes 5 micron spin-on filter and hydraulic oil cooler that allows machines to perform...

Multi Terrain Loaders feature turbocharged engines.

Models 267B, 277B, and 287B are rubber-tracked machines with suspended undercarriage that transfers machine weight to ground through wheeled contact points bearing against track. They are powered by Cat 3044C DIT diesel engine with 3.3 liter displacement. Model 287B features 3,600 lb operating capacity, while Models 277B and 267B offer capacities of 2,950 lb and 2,900 lb, respectively. All employ...

Sideloader offers lift heights to 30 ft.

Model C6000 GT features internal combustion, LP gas engine designed to operate in steel service centers and outdoors in storage yards and loading areas. Two models offer capacities of 6,000 and 10,000 lb. Sideloader features hydrostatic drive and brakes, narrow aisle configuration for operation in confined areas, and cushion tires on rear for load stability. Operator compartment has...

Loading Systems work with grinding machines.

Loading Systems are suited for low-volume production runs or prototype work. Standardized mechanical modules feed and correctly position parts at clamping point. Centrally controlled and programmed, units permit loading and storing of parts before and after machining. Systems for external and universal machines are based on portal loading principle with V-grips. Swiveling loading systems are...

Multi-Terrain Loaders feature turbocharged engines.

Models 247B and 257B combine technology of Cato Skid Steer Loaders and suspended track undercarriage that transfers machine weight to ground through 24-wheeled contact points bearing against 59 in. of track on ground. Operating capacities for 247B and 257B are 1,950 lb and 2,310 lb respectively, when defined as 50% of tipping load. Both loaders use Cat 3024C T engine, which complies with U.S. EPA...

Skid-Steer Loader incorporates rubber tracks.

Skid-Steer Loader features Over the Tire Rubber Track suited for working in adverse conditions and finished surfaces such as lawns and paved surfaces. Tracks are made with multiple compounds within track and can be left on permanently. Traction lugs on side plates enhance tire-to-track traction and help support side plates. Track provides floatation with reduced ground pressure and soil damage....

560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance

EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.