Light Emitting Diodes (LED)

Dimmable LED Luminaires are optimized for wall wash applications.
Electrical Equipment & Systems

Dimmable LED Luminaires are optimized for wall wash applications.

Mounted with track, canopy, c-clamp, and busway, Murro High Power LED Wall Washers provide 2-to-1 fixture/wall spacing ratio that optimizes light generation to minimize fixture quantity requirements. Lens and textured reflector provide even, intense washes of light. Using 47 W while operating on 120–277 volt systems, passively cooled luminaires feature lockable vertical 0° to 90° tilt and...

Read More »
Electronic Components & Devices

Post-Top LED Street Lights are available in new designs.

Both Razar-PT1, which incorporates reverse-triangle single arm design that connects tenon hub to housing, and Razar-PT2, which has twin arm post-top mounting that separates electrical compartment/mounting hub from optical housing, feature 40 or 80 PLED optical modules with choice of 10 light distribution patterns. Lens-free design and optional house-side shielding offer brightness control and...

Read More »
Zone 1 and 2 LED Floodlights serve challenging environments.
Electronic Components & Devices

Zone 1 and 2 LED Floodlights serve challenging environments.

Respectively approved for use in Zone 1 and 2 areas, 6125 and 6525 series have 50,000 hr service life and IP66/67-rated enclosure. TIR lenses minimize scattered light and glare while enabling light distribution focused in angles of 10°, 40°, or 120°. Able to be used for spot and wide-angle lighting and as pendant lights, 210 and 120 W floodlights respectively produce 21,000 and 12,000 lm....

Read More »
Ten Ways to Control Aluminum Costs
Sponsored

Ten Ways to Control Aluminum Costs

All job shops want to save money, and one of the most lucrative ways to do this is by learning how to control the costs of materials such as aluminum. An analysis of your material usage as well as how much you end up scrapping can reveal a goldmine of savings. In this white paper, you will learn ten ways in which you can capitalize on these hidden reserves. From understanding scraps in a more mathematical way to accomplishing jobs with a lean manufacturing approach, this list will provide you with the necessary tools you need to assist you in your financial analysis of your shop’s material consumption. This paper also features real world case studies to illustrate how the right attitude towards material costs can affect real change in terms of money, time, and efficiency.

Read More »
Bi-Color SMD LED comes in ultra-bright colors.
Electronic Components & Devices

Bi-Color SMD LED comes in ultra-bright colors.

Developed from combination of AlInGaP and InGaN dies, XZxxxx55W-8 Series is built to meet and exceed demanding visibility requirements. Device features dome lens with narrow viewing angle of 30°, independent anode/cathode for each color, and operating current of IF=20 mA. With standard 1206 footprint of 3.2 x 1.6 mm and 4-pad design that allows independent connections for each color channel, LED...

Read More »
LED Downlight features interchangeable, snap-on trims.
Electronic Components & Devices

LED Downlight features interchangeable, snap-on trims.

Cobalt Click supports >50 trim variations that click into place to provide application-specific finish for design and stock flexibility. Among others, finish and trim styles include reflector, baffle, wall wash, square round, square pinhole, and square regress. Apertures of 4, 5, and 6 in. with deep set, diffused lens promote visual comfort and reduce glare. Producing 750 lm, dimmable...

Read More »
Electrical Equipment & Systems

LED High Bay Luminaires come in 185, 240, and 320 W variants.

KOTA LED high bay luminaires (185, 240, and 320 W) employ Flip Chip Opto COB LEDs, which dissipate heat via electrode channels, and cold-forged heatsink that facilitates passive cooling. Al 1070 heatsink cores and Al 1050 fins forged with EPD finish keep fixtures cool and eliminate need for cooling fans. Along with 105+ lm/W efficacy, 80+ CRI, and 50,000+ hr rated life (LM70), luminaires...

Read More »
Electrical Equipment & Systems

Low-Profile LED Downlight fits shallow ceilings.

Designed to fit shallow plenums above ceilings in residential and light commercial settings, Aether IC Rated downlight has 3.5 in. profile housing, is Energy Star®- and wet location-listed, and dims with ELV or 0–10 V dimmers. This 70,000 hr-rated unit, which fits into .50–1.5 in. thick ceilings, operates with 22.5 W and delivers up to 1,375 lm. Choice of 25° narrow or 40° flood beam...

Read More »
LED Drop Light combines cool operation, high performance.
Electronic Components & Devices

LED Drop Light combines cool operation, high performance.

Approved for Class 1 Division 1 and 2 locations, explosionproof EHL-LED-7W-GCR100 outputs 1,050 lm of clean white light, runs cool to touch, and has 50,000 hr life rating. Construction is of aluminum and steel, and features include molded rubber bumper guard, 10 W LED bulb, and general use cord reel with 100 ft of cord. While aluminum lamp cage promotes durability, integral aluminum hook...

Read More »
Ergonomic LED Strobe Light produces bright, even illumination.
Electronic Components & Devices

Ergonomic LED Strobe Light produces bright, even illumination.

Used for surface and print quality inspection, LED-9 is designed for facilitated, handheld operation and offers range of adjustments for controlling light output. LEDs provide bright, concentrated, even illumination, and respective flash rates for internal trigger, external trigger, and encoder modes are 30–50,000, 1–50,000, and 1–50,000 flashes per minute. Flood and spot configurations...

Read More »
Basalt America announces FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America announces FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement is structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs dont rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics