Explosionproof LED Beacon Light has corrosion-resistant design.
Intended for locations where signal visibility is critical, HALSB-CRNM-LED strobing signal beacon carries Class 1, Division 2 Groups A/B/C/D certification- and T2D operating temperature rating. LED lamp assembly provides 4 flashes/sec, has 50,000 hr operational life rating, and comes in choice of light colors. NEMA 4X rated against water intrusion and USCG approved for marine locations, product...
Read More »AMEC Enters Solid-State Lighting Market
Company debuts MOCVD Platform for low-cost high-volume manufacture of HB-LEDS, with extendibility to GaN-on-Silicon applications SHANGHAI - At SEMICON China next week, Advanced Micro-Fabrication Equipment Inc. (AMEC) will make its Solid-State Lighting (SSL) market debut with a new multi-reactor Metal Organic Chemical Vapor Deposition (MOCVD) cluster tool. The Prismo D-Blue™ MOCVD platform...
Read More »Hazardous Area LED Light has explosionproof design.
Rated for Class I Division I areas with explosionproof requirements, XP 70 W LED Light is resistant to vibration and offers various mounting options to meet jobsite/application requirements. Product produces 5,800 lm of true white light with little to no heat and can be shut off and turned directly back on without requiring any cooling time. in addition to portable applications, this light can be...
Read More »
Mobile LED Light Tower has explosion-proof design.
Approved for use in Class 1 Division 2 hazardous locations, portable- HAL-QP-1x150LED-100 features 150 W LED lamp, encased within die cast aluminum, that- produces 14,790 lm in flood pattern for illumination of up to 18,000 ft-² areas. Tower is constructed of powder-coated, 1/8 in. thick steel and can be adjusted from 7–10 ft in height.- IP65 lamp assembly can be adjusted through vertical...
Read More »
Axial Flow Check Valves for Pumps and Compressors
DFT® Inc. has provided a range of valve solutions for customers struggling with pump and compressor problems.
Read More »
PAR64 LED Aircraft Landing Light has ruggedized design.
Designed as drop-in replacement for existing Q4559 and Q4559X quartz halogen lamps, triple-redundant PAR64 LED Landing Light is qualified to RTCA DO160, MIL-STD-810/-461, and other requirements for fixed-wing and rotor-craft applications. Control electronics, ruggedized housing, and LED design eliminate concern over failure due to temperatures, vibration, and weather. Light- consumes 60 W and...
Read More »
LED Light Bar offers selectable blue/white output.
Supplied in aluminum housing with unbreakable polycarbonate lens, LEDLB-24E-VISBLUE- features 4 rows of Cree-® EZBright emitters and 2- input leads. Latter lets operators connect unit to- multi-position switch to produce blue or white light independently or in combination. IP68-rated waterproof to 3 m, light bar can be connected to dimmers or pulse controllers, operates from 9–32 Vdc and...
Read More »
LED Light Bar has 2 in. profile and produces 1,000+ lm.
Able to be mounted in space-limited locations, 9 in. long LEDP3W-6 features six 3W CREE-® XLamp XR-E-® LEDs that produce 228 lm each. Heavy-duty fixture assembly, constructed- of extruded aluminum with unbreakable polycarbonate lens,- is IP68-rated waterproof to 3 m. Operating from 9–32 Vdc, light bar has internal LED drivers that actively monitor voltage and heat levels and allow...
Read More »
LED Reference Design achieves high-performance dimming.
Based on LYT4313E, RDR-347 downlight delivers power factor greater than 0.95 and reduces THD to less than 10%. This 12 W reference design meets EN61000-3-2C requirements, and efficiency is greater than 86% at 120 Vac. Combined PFC and CC power conversion stage minimizes losses and- decreases component count. Capable of TRIAC dimming without shimmer or flicker, solution offers start-up time under...
Read More »
Patlite CLK Series LED Worklights Deliver Superior Luminescence, Improve Productivity, and Reduce Repair and Replacement Costs, on CNC Machines
TORRANCE, CA- Kyocera Tycom, a manufacturer of tight tolerance carbide cutting tools for Print Circuit Board (PCB) applications, recently replaced problematic and expensive fluourescent lighting on their drill bit-producing CNC machines with Patlite CLK Series LED Worklights. Previously, the machines’ dim fluorescent lights provided insufficient lighting, and the harsh environmental conditions...
Read More »
Cooper Lighting Products Accepted into the Prestigious 2012 Illuminating Engineering Society Progress Report for Technical Advancement
A total of 14 innovative products, including 13 LED luminaires, represent significant product developments and improvements to the lighting industry. - PEACHTREE CITY, Ga.- Cooper Lighting, a leader at the forefront of transforming the lighting industry and setting an unmatched standard for innovation and reliability, announces that 14 of its innovative and reliable products- - include 13 LED...
Read More »
SRG Global Coatings Enhance Surface Durability, Efficiency, Design Flexibility
SRG Global's automotive coatings enhance the structural integrity of the finished part while also improving vehicle efficiency. Check out our video to learn more.
Read More »
