Light Emitting Diodes (LED)

Bi-Color SMD LEDs have high intensity, low current design.
Light Emitting Diodes (LED)

Bi-Color SMD LEDs have high intensity, low current design.

Developed from- combination of AlInGaP and InGaN dies,- XZxxxx55W-8 series has 1.8 mm profile and occupies standard 1206 footprint of 3.2 x 1.6 mm. Ultra-Bright colors and dome lens with narrow viewing angle of 30-° provide high intensity while operating with- current of IF=20 mA. Along with independent anode/cathode for each color, features include MSL of- 3 and 4-pad design that allows...

Read More »
Dimmable LED Luminaires are optimized for wall wash applications.
Light Emitting Diodes (LED)

Dimmable LED Luminaires are optimized for wall wash applications.

Mounted with track, canopy, c-clamp, and busway,- Murro High Power LED Wall Washers provide 2-to-1 fixture/wall spacing ratio that optimizes light generation to minimize fixture quantity requirements. Lens and textured reflector provide even, intense washes of light. Using 47 W while operating on 120–277 volt systems,- passively cooled luminaires- feature lockable vertical 0-° to 90-° tilt...

Read More »
Light Emitting Diodes (LED)

Post-Top LED Street Lights are available in new designs.

Both Razar-PT1, which- incorporates reverse-triangle single arm design that connects tenon hub to housing, and Razar-PT2, which- has- twin arm post-top mounting that separates electrical compartment/mounting hub from optical housing, feature 40 or 80 PLED optical modules with- choice of 10 light distribution patterns. Lens-free design and optional house-side shielding offer brightness control...

Read More »
Zone 1 and 2 LED Floodlights serve challenging environments.
Light Emitting Diodes (LED)

Zone 1 and 2 LED Floodlights serve challenging environments.

Respectively approved for use in Zone 1 and 2 areas,- 6125 and 6525 series- have- 50,000 hr service life and IP66/67-rated enclosure. TIR lenses minimize scattered light and glare while enabling light distribution focused in angles of 10-°, 40-°, or 120-°. Able to be used for spot and wide-angle lighting- and as pendant lights, 210 and 120 W floodlights respectively produce 21,000 and...

Read More »
Bi-Color SMD LED comes in ultra-bright colors.
Light Emitting Diodes (LED)

Bi-Color SMD LED comes in ultra-bright colors.

Developed from combination of AlInGaP and InGaN dies, XZxxxx55W-8 Series is built to meet and exceed demanding visibility requirements. Device features dome lens with narrow viewing angle of 30°, independent anode/cathode for each color, and operating current of IF=20 mA. With standard 1206 footprint of 3.2 x 1.6 mm and 4-pad design that allows independent connections for each color channel, LED...

Read More »
LED Downlight features interchangeable, snap-on trims.
Light Emitting Diodes (LED)

LED Downlight features interchangeable, snap-on trims.

Cobalt Click supports >50 trim variations that- click into place to provide application-specific finish for design and stock flexibility. Among others, finish and trim styles include reflector, baffle, wall wash, square round, square pinhole, and square regress.- Apertures of 4, 5, and 6 in.- with deep set, diffused lens promote visual comfort and reduce glare. Producing 750 lm, dimmable...

Read More »
Light Emitting Diodes (LED)

Low-Profile LED Downlight fits shallow ceilings.

Designed to fit shallow plenums above ceilings in residential and light commercial settings, Aether IC Rated downlight has 3.5 in. profile housing, is Energy Star-®- and wet location-listed, and dims with ELV or 0–10 V dimmers. This 70,000 hr-rated unit, which- fits into .50–1.5 in. thick ceilings, operates with 22.5 W and delivers up to 1,375 lm. Choice of 25-° narrow or 40-° flood beam...

Read More »
LED High Bay Luminaires come in 185, 240, and 320 W variants.
Light Emitting Diodes (LED)

LED High Bay Luminaires come in 185, 240, and 320 W variants.

KOTA LED high bay luminaires (185, 240, and 320 W) employ Flip Chip Opto COB LEDs, which- dissipate heat via electrode channels, and cold-forged heatsink that facilitates passive cooling. Al 1070 heatsink cores and Al 1050 fins forged with EPD finish keep fixtures cool and eliminate need for cooling fans.- Along with- 105+ lm/W efficacy, 80+ CRI, and 50,000+ hr rated life (LM70),- luminaires...

Read More »
LED Drop Light combines cool operation, high performance.
Light Emitting Diodes (LED)

LED Drop Light combines cool operation, high performance.

Approved for Class 1 Division 1- and 2 locations, explosionproof EHL-LED-7W-GCR100 outputs 1,050 lm of clean white light, runs cool to touch, and has- 50,000 hr life rating. Construction is of aluminum and steel,- and features include molded rubber bumper guard, 10- W LED bulb, and- general use cord reel with 100 ft of cord. While aluminum lamp cage promotes durability, integral aluminum...

Read More »
Ergonomic LED Strobe Light produces bright, even illumination.
Light Emitting Diodes (LED)

Ergonomic LED Strobe Light produces bright, even illumination.

Used for surface and print quality inspection, LED-9 is designed for facilitated, handheld operation and offers range of adjustments- for controlling light output. LEDs provide bright, concentrated, even illumination, and respective flash rates for internal trigger, external trigger, and encoder modes are 30–50,000, 1–50,000, and 1–50,000 flashes per minute. Flood and spot configurations...

Read More »

All Topics