Kingbright's IR LEDs are offered in SMD and Through-Hole packages.
Kingbright’s IR LEDs are available with infrared, phototransistor and sensor selection. These infrared emitter and phototransistor feature a wavelength ranging from 880nm to 940nm at 20mA with 20° to 160° viewing angles. Photo light sensor uses NPN silicon phototransistor whereas RGB color sensor utilizes three Si photodiodes with color filter. The sensors are offered in SMD package and used...
Read More »
Captivate™ Illuminated Mirror LED features perimeter etched panels.
Captivate™ Illuminated Mirror LED is offered in 18 x 39 in., 25 x 43 in., 31 x 43 in. and 37 x 43 in. sizes and 3000K, 3500K and 4000K light color temperatures with CRI of greater than 80. Product is suitable for healthcare, hospitality, commercial and residential applications and is compliant to ADA standards. Unit is operated on 120-277 V and is compatible for 0-10 V dimming. Product comes...
Read More »
Next Generation PLCC RGB SMD LED engineered for reverse-mount use.
The reverse-mount PLCC RGB SMD LED from SunLED was designed for full color illumination. The SunLED model number of XZMDKCBDDG45S-9 is redesigned to feature winged leads to provide a more solid and robust soldering area. The LED also contains a wide viewing angle of 120 degrees that delivers a uniform light pattern and a better color mixture. The product applications include medical equipment,...
Read More »
VLMU60CL..-280-125 UVC Emitting Diode provides ± 62.5° emission angle.
VLMU60CL..-280-125 UVC Ceramic/ Quartz-Based Emitting Diode is suitable for sterilization, sanitation, and purification applications. Units feature forward current up to 40 mA, forward voltage down to 4.4 V with 270 nm to 290 nm wavelength range. Diodes are halogen-free and RoHS compliant and delivers radiant power to 3.8 mW at 20 mA. Units come in 6 x 6 x 1.6 mm surface mount package.
Read More »
Heated Deck Panels
Heated Deck Panels: The playbook to how these snow-free walkways work for bridges, sidewalks, and platforms
Read More »
SS-LED Bi-Level offers energy savings capabilities.
Featuring passive infrared sensors, LaMar’s SS-LED Luminaire is an energy saving, low cost bi-level light. As sensors detect motion lights can switch from one quarter lighting to full, or from off to on. Since sensors are infrared, lights only switch on when people are actually in their 360 degree detection fields, instead of nearby. Products are designed to last long with little maintenance...
Read More »
Appleton® Baymaster™ LED High Bay Lighting Fixture features a quick-mount pendant system.
Emerson’s Appleton Baymaster eliminates glare and dark spots, has various beam spread options, six lumen output levels and allows for one person installation. Product is also temperature, weather, corrosion and thermal shock resistant. Suited for plants, oil refineries, foundries and water treatment centers.
Read More »
LED Vapor Proof Light Fixture offers life of 50000+ hrs.
GVP-48-2L-LED-D-LV LED Vapor Proof Light Fixture is equipped with two, 4 ft-long, 23 W LED T8-Series bulbs. Unit comes with dimmer switches including the Leviton 6633-PLW, with 0-10V dimming capability. Product is resistant to vibration and impact with its solid state design and can be surface mounted or hung from cable and chains. Featuring aluminum heat sink tube backings, fixture can withstand...
Read More »
Panel Mount LED CL Indicators come with watertight sealing gasket.
Offered in red, green, yellow, blue and bicolor options, 14mm Panel Mount LED CL Indicators can be configured for voltages up to 60 VDC or 120/240 VAC. Units come in metal housing of M14 size and feature Mil Spec MIL-W22759/33 wire and connector options. 10mm LED CL indicators are equipped with internal resistors and suitable for military, aerospace, forklifts, cranes and transport equipment...
Read More »
Mid IR LEDs for NDIR and Moisture Content
Electro Optical Components introduces optoelectronic devices for the mid-infrared spectral range. Products include a wide range of Light Emitting Diodes (LEDs), LED arrays and spectral matched Photodiodes (PD) covering the spectral range from 1600 to 5000 nm. Applications they are ideally suited for are: NDIR gas detection Film moisture content monitoring Low power consumption for portable...
Read More »
Oslux S 2.1 Multi-Chip LED provides brightness of 125 lux.
Offering uniform illumination of photos and video recordings, Oslux S 2.1 Multi-Chip LED features cold white chip with 6,000 K and warm white chip with 2,250 K. Equipped with silicone lens, unit comes with maximum deviation of 300 K. Measuring 5.0 mm x 5.0 mm x 1.15 mm dimensions, product is suitable for mobile devices applications. Oslux S 2.1 provides color fidelity and color uniformity.
Read More »
Precision Fabricating with Over 40 Years of Experience
Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.
Read More »
