Light Emitting Diodes (LED)

Four Foot LED Bulb upgrades existing T8 fluorescent fixtures.
Light Emitting Diodes (LED)

Four Foot LED Bulb upgrades existing T8 fluorescent fixtures.

Rated 15.9Â- W, LEDT8-48-BLST produces 130 lm/W for 2,000 lm/bulb total and is designed for direct replacement ofÂ- 4 ft fluorescent fixtures with G13 bases. Design does not require any rewiring, and driver allows use with fluorescent ballast without incurring damage toÂ- LED lamp. Lamp may also be used inÂ- fixture without ballast. Along with directional designÂ- producing...

Read More »
Chip-on-Board LEDs facilitate assembly and offer color on demand.
Light Emitting Diodes (LED)

Chip-on-Board LEDs facilitate assembly and offer color on demand.

XUAN series COBs (36 V) have thermally conductive mirror-aluminum substrate andÂ- attach to heatsink by holder or screws. Covering 2–50 W, MCPCB device can achieve >130 lm/W. There are 7 designs in 1313 and 1919 dimensions with CCTs from 2,700K to 6,500K and CRI ratings of 82, 92, and >97 Ra. In ceramic PCB package, 9, 19, and 29 W Color ChoiceÂ-® (Color on Demand) CHI COBs offer...

Read More »
Air Amplifiers and How They Work
Sponsored

Air Amplifiers and How They Work

Air amplifiers are pneumatically driven devices that use shop air to provide the motive power for increasing air pressure. This white paper provides an in-depth overview into the air amplifiers and how they work.

Read More »
Quadpod 150 W LED Flood Light withstands difficult environments.
Light Emitting Diodes (LED)

Quadpod 150 W LED Flood Light withstands difficult environments.

Providing 9,000 ftÂ-² coverage with 12,500 lm, WAL-QP-1X150BS-GCR50 features adjustable 150 W LED light head, mounted withinÂ- portable base stand frame and fabricated from non-sparking aluminum, which can be used separately from quadpod. Industrial grade work light's 4-leg aluminum quadpod has solid wheels for portability and can be extended to 12 ft and collapsed toÂ- 4 Â-½ ft....

Read More »
Light Emitting Diodes (LED)

LED Retrofit Kits upgrade existing wall packs/area lights.

Without requiring acquisition ofÂ- new fixtures, 50w LED retrofit kits enable property managers and electrical contractors to upgrade fixtures, including those that are architecturally unique or historical, to LED. Installer removes current lamp, ballast, and reflector; bolts in LED retrofit kit; and directs adjustable LED light engine. Rated LM70 at 50,000 hr, kits replace up to 250 W HID...

Read More »
Light Emitting Diodes (LED)

In-Ground LED Fixtures offer alternative to HID solutions.

Designed to replace 150 W HID 9.5 and 13 in.Â- in-ground lighting fixtures, 18 W ActiveLEDÂ-® In-Ground is available in 120, 208, 240, and 277Â- V ratings andÂ- 2700K, 3000K, 3500K, and 5000K color temperatures to meet desired ambience/safety requirements. Corrosion-resistant, vacuum-sealed light engine combats heat. Products are available asÂ- complete unit with light engine...

Read More »
Light Emitting Diodes (LED)

LED Spotlight has bar clamp mounted design.

Designed for mounting to rails, cages, and roll bars on marine craftÂ- or utility and all-terrain vehicles, BCML-LED-21R operates from 9–32 V and draws 21 W to produce 575 ft longÂ- xÂ- 45 ftÂ- wide beam with 1,750 lm of bright light. Bar clamp mounted LED spotlight, rated to IP67 and waterproof toÂ- 1 m, employs 7 Edison Edixeon Emitters containing CREE EZBrightÂ- 3 W...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics