Light Emitting Diodes (LED)

Four Foot LED Bulb upgrades existing T8 fluorescent fixtures.
Light Emitting Diodes (LED)

Four Foot LED Bulb upgrades existing T8 fluorescent fixtures.

Rated 15.9Â- W, LEDT8-48-BLST produces 130 lm/W for 2,000 lm/bulb total and is designed for direct replacement ofÂ- 4 ft fluorescent fixtures with G13 bases. Design does not require any rewiring, and driver allows use with fluorescent ballast without incurring damage toÂ- LED lamp. Lamp may also be used inÂ- fixture without ballast. Along with directional designÂ- producing...

Read More »
Quadpod 150 W LED Flood Light withstands difficult environments.
Light Emitting Diodes (LED)

Quadpod 150 W LED Flood Light withstands difficult environments.

Providing 9,000 ftÂ-² coverage with 12,500 lm, WAL-QP-1X150BS-GCR50 features adjustable 150 W LED light head, mounted withinÂ- portable base stand frame and fabricated from non-sparking aluminum, which can be used separately from quadpod. Industrial grade work light's 4-leg aluminum quadpod has solid wheels for portability and can be extended to 12 ft and collapsed toÂ- 4 Â-½ ft....

Read More »
Light Emitting Diodes (LED)

LED Retrofit Kits upgrade existing wall packs/area lights.

Without requiring acquisition ofÂ- new fixtures, 50w LED retrofit kits enable property managers and electrical contractors to upgrade fixtures, including those that are architecturally unique or historical, to LED. Installer removes current lamp, ballast, and reflector; bolts in LED retrofit kit; and directs adjustable LED light engine. Rated LM70 at 50,000 hr, kits replace up to 250 W HID...

Read More »
Sponsored

6 Challenges Faced by Supply Chain Leaders in Discrete Manufacturing and How Analytics Solves Them

This eBook describes the challenges faced by Supply Chain Leaders in Discrete Manufacturing. From consumer electronics to automotive manufacturing, most of the global economy's largest industries rely on discrete manufacturing. Manufacturers in these industries face several unique challenges. The COVID-19 pandemic, followed by war, created major disruptions in supply chains worldwide, stressing the need for more integrated, transparent systems that would facilitate proactive management and faster decision-making. With supply chain issues expected to continue in 2022 and beyond, this ebook will help describe to supply chain leaders ways to prepare for certain global challenges.

Read More »
Light Emitting Diodes (LED)

In-Ground LED Fixtures offer alternative to HID solutions.

Designed to replace 150 W HID 9.5 and 13 in.Â- in-ground lighting fixtures, 18 W ActiveLEDÂ-® In-Ground is available in 120, 208, 240, and 277Â- V ratings andÂ- 2700K, 3000K, 3500K, and 5000K color temperatures to meet desired ambience/safety requirements. Corrosion-resistant, vacuum-sealed light engine combats heat. Products are available asÂ- complete unit with light engine...

Read More »
Light Emitting Diodes (LED)

LED Spotlight has bar clamp mounted design.

Designed for mounting to rails, cages, and roll bars on marine craftÂ- or utility and all-terrain vehicles, BCML-LED-21R operates from 9–32 V and draws 21 W to produce 575 ft longÂ- xÂ- 45 ftÂ- wide beam with 1,750 lm of bright light. Bar clamp mounted LED spotlight, rated to IP67 and waterproof toÂ- 1 m, employs 7 Edison Edixeon Emitters containing CREE EZBrightÂ- 3 W...

Read More »
Explosionproof LED Drop Light has in-line transformer.
Light Emitting Diodes (LED)

Explosionproof LED Drop Light has in-line transformer.

Able to run off of 120 V, with inline step down transformer to 12 V, EPL-FL1524-LED-120X12-C1D2-100 hazardous area work light produces cool, glare-free, shadowless light via 15Â- W LED bulb and is FM approved for Class 1, Division 1Â- and 2 areas. This 2 ft long light, supplied with 100 ft of explosion proof cord, has non-sparking aluminum casing, unique rod cage, and built-in metal...

Read More »
Light Emitting Diodes (LED)

Weatherproof LED Drop Light can be moved to wherever it is needed.

Resistant to shock and impact, FTL-3-LED-25 employsÂ- 50,000 hr LED T8 bulb that produces 1,277 lm of light and does not require any ballast to operate. Polycarbonate lens in bulb diffuses light, aluminum housing serves asÂ- heat sink, and handle and end are finished withÂ- polyoxymethylene plastic. Supporting 110–277 V operation, this 14 W light comes with drop hook and 25 ft of...

Read More »
Modular LED Street Lights replace existing MH/HPS fixtures.
Light Emitting Diodes (LED)

Modular LED Street Lights replace existing MH/HPS fixtures.

Dimmable from 15%–100% of max brightness, ETL-listed and RoHS-compliantÂ- Series SLM00 conform to IESNA Type III pattern, providing full cutoff, and is available in 5000K pure white LED light color. LED lifespanÂ- is 50,000+ hr, and lights support 120–277 Vac input. Available inÂ- 65–310 W configurations for replacing 150–1,000 W MH/HPS lighting, these replacements offer lumen...

Read More »
Light Emitting Diodes (LED)

Commercial Grade LED Downlights meet CEC requirements.

Comprising of 6 in., 16 W and 4 in., 12 WÂ- downlights, TITANIUM LED CRISP SERIES 3.0 complies with California Quality Specification (CEC) with typical values that include CRI of 92 and R9 of 60. Dimmable fixtures produce color temperatures that fall within 4-step Macadam ellipse. While 6 in.Â- downlight replacesÂ- 75 W incandescent and comes in 2700K and 3000K CCTs, 4...

Read More »

All Topics