Light Emitting Diodes (LED)

Captivate™ Illuminated Mirror LED features perimeter etched panels.
Electronic Components & Devices

Captivate™ Illuminated Mirror LED features perimeter etched panels.

Captivate™ Illuminated Mirror LED is offered in 18 x 39 in., 25 x 43 in., 31 x 43 in. and 37 x 43 in. sizes and 3000K, 3500K and 4000K light color temperatures with CRI of greater than 80. Product is suitable for healthcare, hospitality, commercial and residential applications and is compliant to ADA standards. Unit is operated on 120-277 V and is compatible for 0-10 V dimming. Product comes...

Read More »
Next Generation PLCC RGB SMD LED engineered for reverse-mount use.
Electronic Components & Devices

Next Generation PLCC RGB SMD LED engineered for reverse-mount use.

The reverse-mount PLCC RGB SMD LED from SunLED was designed for full color illumination. The LED carries a model number of XZMDKCBDDG45S-9 and is redesigned to feature winged leads to provide a more solid and robust soldering area. The LED also contains a wide viewing angle of 120 degrees that delivers a uniform light pattern and a better color mixture. The product applications include medical...

Read More »
VLMU60CL..-280-125 UVC Emitting Diode provides ± 62.5° emission angle.
Electronic Components & Devices

VLMU60CL..-280-125 UVC Emitting Diode provides ± 62.5° emission angle.

VLMU60CL..-280-125 UVC Ceramic/ Quartz-Based Emitting Diode is suitable for sterilization, sanitation, and purification applications. Units feature forward current up to 40 mA, forward voltage down to 4.4 V with 270 nm to 290 nm wavelength range. Diodes are halogen-free and RoHS compliant and delivers radiant power to 3.8 mW at 20 mA. Units come in 6 x 6 x 1.6 mm surface mount package.

Read More »
SS-LED Bi-Level offers energy savings capabilities.
Electronic Components & Devices

SS-LED Bi-Level offers energy savings capabilities.

Featuring passive infrared sensors, LaMar’s SS-LED Luminaire is an energy saving, low cost bi-level light. As sensors detect motion lights can switch from one quarter lighting to full, or from off to on. Since sensors are infrared, lights only switch on when people are actually in their 360 degree detection fields, instead of nearby. Products are designed to last long with little maintenance...

Read More »
Ten Ways to Control Aluminum Costs
Sponsored

Ten Ways to Control Aluminum Costs

All job shops want to save money, and one of the most lucrative ways to do this is by learning how to control the costs of materials such as aluminum. An analysis of your material usage as well as how much you end up scrapping can reveal a goldmine of savings. In this white paper, you will learn ten ways in which you can capitalize on these hidden reserves. From understanding scraps in a more mathematical way to accomplishing jobs with a lean manufacturing approach, this list will provide you with the necessary tools you need to assist you in your financial analysis of your shop’s material consumption. This paper also features real world case studies to illustrate how the right attitude towards material costs can affect real change in terms of money, time, and efficiency.

Read More »
LED Vapor Proof Light Fixture offers life of 50000+ hrs.
Electronic Components & Devices

LED Vapor Proof Light Fixture offers life of 50000+ hrs.

GVP-48-2L-LED-D-LV LED Vapor Proof Light Fixture is equipped with two, 4 ft-long, 23 W LED T8-Series bulbs. Unit comes with dimmer switches including the Leviton 6633-PLW, with 0-10V dimming capability. Product is resistant to vibration and impact with its solid state design and can be surface mounted or hung from cable and chains. Featuring aluminum heat sink tube backings, fixture can withstand...

Read More »
Panel Mount LED CL Indicators come with watertight sealing gasket.
Electronic Components & Devices

Panel Mount LED CL Indicators come with watertight sealing gasket.

Offered in red, green, yellow, blue and bicolor options, 14mm Panel Mount LED CL Indicators can be configured for voltages up to 60 VDC or 120/240 VAC. Units come in metal housing of M14 size and feature Mil Spec MIL-W22759/33 wire and connector options. 10mm LED CL indicators are equipped with internal resistors and suitable for military, aerospace, forklifts, cranes and transport equipment...

Read More »
Mid IR LEDs for NDIR and Moisture Content
Electronic Components & Devices

Mid IR LEDs for NDIR and Moisture Content

Electro Optical Components introduces optoelectronic devices for the mid-infrared spectral range. Products include a wide range of Light Emitting Diodes (LEDs), LED arrays and spectral matched Photodiodes (PD) covering the spectral range from 1600 to 5000 nm. Applications they are ideally suited for are: NDIR gas detection Film moisture content monitoring Low power consumption for portable...

Read More »
VLMTG1400 Green LEDs feature 0.55 mm thin profile.
Electronic Components & Devices

VLMTG1400 Green LEDs feature 0.55 mm thin profile.

Available in 8 mm tape, VLMTG1400 Green LEDs offer luminous intensity up to 2,800 mcd. Featuring wavelength of 525 nm and viewing angle of 146°, units come in 1.6 mm × 0.8 mm size. Offering forward voltage from 2.75 V to 3.2 V, products use ultrabright InGaN chip technology. Suitable for navigation systems, cell phones, industrial control systems, traffic signals and message boards...

Read More »
Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industrys premier HBOT system. To learn more, see our video.

Read More »

All Topics