Gas / Chemical Analyzers

Dissolved Ozone Analyzer monitors semiconductor processes.

dFFOZ(TM) Sulfuric Dissolved Ozone analyzer provides continuous, in-situ, in-line measurements in liquids over concentration range of 0 to 150 mg/L. It can operate continuously at temperatures up to 140°C in sulfuric bath, high purity semiconductor processes, and semiconductor wet bench/wet etching systems. FlareLok® fittings remain tight and won't leak. It can be installed in...

Read More »
Primers

Primer blocks stains and seals porous surfaces.

Moorcraft® Super Spec® alkyd-based primer, sealer, and stain suppressor is suitable for interior use on bare or previously painted wood, plaster, drywall, plywood, and hardboard surfaces. It may also be used on exterior surfaces for limited applications, such as sealing knots or suppressing sap stains. Primer is available in gallons, in white only. Product seals charred or...

Read More »
3D Scanner provides long-range capabilities.
Scanners / Readers

3D Scanner provides long-range capabilities.

LMS-Z360 offers 360 deg horizontal and 90 deg vertical scanning angles. Surface geometry is remotely captured in form of dense 3D point clouds that can be exported to software packages for post-processing. Scanner provides measurement ranges from 2 to 200 meters at rates of 6,000 to 18,000 points per second. Angular resolution is 0.002 and 0.0025 deg, and step width is 0.01 deg.

Read More »
Analyzer identifies first outs on relay logic systems.
Miscellaneous Analyzers

Analyzer identifies first outs on relay logic systems.

Crakker self-contained logic/timing analyzer monitors up to 16 different channels and I/O points, with voltage inputs ranging from 5 Vdc to 400 Vdc or to 280 Vac. It records each voltage transition and stores information to memory to be downloaded into Version 3.0 Crakker Communications program and analyzed. Transitions as fast as 165 microseconds can be recorded and captured for review and...

Read More »
Gas / Chemical Analyzers

Emissions Analyzer is powered by rechargeable battery.

Tempest 100 handheld analyzer monitors gaseous emissions, calculates combustion efficiency, and logs and prints gas data. Detectable gases include CO, CO2, nitrogen monoxide, and O2. All data can be downloaded to PC. Tempest 100 also provides unattended monitoring over extended periods via programmable datalogging. It analyzes combustion performance with integral thermocouples, which measure...

Read More »
Carbon Dioxide Analyzer has XML communication protocol.
Gas / Chemical Analyzers

Carbon Dioxide Analyzer has XML communication protocol.

LI-820 non-dispersive infrared gas analyzer provides continuous monitoring of CO2 with automatic temperature and pressure compensation. It has user-cleanable optical paths which do not require factory recalibration, 2 interchangeable optical benches for total of 4 CO2 measurement ranges, and user defined high and low alarms available as voltage outputs for control. Analog outputs include 0-2.5 V,...

Read More »
Distillation System checks for ammonia and phenols.
Stills

Distillation System checks for ammonia and phenols.

Lab-Crest® Midi-Dist System allows users to downscale EPA Method 350.1 for ammonia and Method 420.4 for phenol. With 90% reduction in sample size and reagents used, it meets EPA targets for reducing waste when conducting environmental analyses. It can distill up to 10 samples at once. Detection range for ammonia is 0.01 to 2.0 micro g/L; phenol is 2.0 to 500.0 mg/L. Applications include...

Read More »
Compressors

Piston Compressors offer one-piece heads.

Series 2660 WOB-L® piston compressors' one-piece cast aluminum head design eliminates leakage and reduces sound levels. Features include nine-blade fans and high performance piston seals. Pressure is rated to 160 psi (max), maximum vacuum is rated to 29.2 in. Hg, and free flow is rated to 5.60 cfm (max). Series suits medical equipment and industrial applications.

Read More »
Cutting Inserts improve efficiency and productivity.
Inserts

Cutting Inserts improve efficiency and productivity.

Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOT(TM) and HOLESHOT(TM)-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.

Read More »
Sound-Level Meter assesses work-place and community noise.
Meters

Sound-Level Meter assesses work-place and community noise.

Hand-held 2260 Observer(TM) sound-level meter/sound analyzer complies with standard IEC 61672 as well as previous IEC standards 60651 and 60804, and ANSI standards. All broadband parameters and statistical values are measured in parallel. Real-time analysis in 1/1- or 1/3-octave bands is carried out simultaneously. Broadband and spectral data can be logged to obtain time history (profile) for...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics