Calibrated Noise Sources offer a VSWR as low as 1.25:1.
Cleaning Products & Equipment

Calibrated Noise Sources offer a VSWR as low as 1.25:1.

Calibrated Noise Sources are available in models that cover frequency bands from 10 KHz to 18 GHz. Units are suitable for wireless testing, signal simulation, evaluating analog and DOCSYS CATV systems. Product features a temperature coefficient of less than 0.01 dB/°C and noise output variation is less than 0.1 dB/%V. Noise Sources meet MIL-STD-202F standards and are enclosed in metal packages...

Read More »
Roland DGA to Showcase its Open Architecture MDX Series Mills at SOLIDWORKS World 2018
Food Processing & Preparation

Roland DGA to Showcase its Open Architecture MDX Series Mills at SOLIDWORKS World 2018

Irvine, Calif., Jan. 31, 2018 – Roland DGA will be demonstrating its latest 3D milling machines and other advanced digital devices at SOLIDWORKS World 2018, February 5-8, in Los Angeles. Held annually, this 3D design and technology event attracts thousands of SOLIDWORKS users, resellers, entrepreneurs, educators and students from all over the world. At this year’s show, Roland DGA will be...

Read More »
Frequency Response Analysis for Power Conversion Products Without Small-Signal Linearization1,2
Sponsored

Frequency Response Analysis for Power Conversion Products Without Small-Signal Linearization1,2

1.|Introduction|1-2 2.|Frequency Response Analysis with Circuit Oriented Simulator|2-4 3.|Large Signal Modeling of the Closed-Loop DC-DC Converter|4 4.|Control-Oriented Model of the Closedloop DC-DC Converter|5-6 5.|Frequency Response Analysis with FFT|6 6.|Analysis Results|6-7 7.|Data Filtering Prior to FFT|7-8 8.|Conclusion|8 9.|References|8 10.|Biography|8 11.|Figures| 11.1|Generic simulation set-up for acquisition of frequency response data using circuit-oriented and MATLAB simulator|3 11.2|Algorithm block diagram of frequency response acquisition based on fundamental-component extraction out of Fourier series using a circuitoriented simulator|3 11.3|Timing diagram showing frequency samples and their respective enable/reset signals|3 11.4|Acquisition set-up for frequency response of array-voltage regulation loop|4 11.5|Array-regulation loop-gain frequency response acquired from the average and switching models implemented in a circuit-oriented simulator (PSPICE)|4 11.6|Conversion from circuit-oriented to controloriented models of the line-filter with an array source|5 11.7|Large-signal average modeling of the switching converter power stage in a control-oriented format (SIMULINK)|5 11.8|Modeling of peak-current programmed control laws in SIMULINK|6 11.9|SIMULINK model of the converter system shown in Fig. 4 using large-signal average technique|6 11.10|SIMULINK model of the converter system shown in Fig. 1 using pulse-by-pulse technique|6 11.11|Converter loop-gain response of the arrayvoltage regulation via PSPICE and SIMULINK|7 11.12|Time-domain steady-state responses of the loopgain input, Ve, and output, Vin|7 11.13|Converter loop-gain response acquired from both the non-linear switching and the average models developed in SIMULINK|7 11.14|Time-domain steady-state responses of loop gain input, Ve, and output, Vin , from SIMULINK converter switching model|7

Read More »
Edgetech Instruments Inc. Moisture Analyzers Assist Innovative Liquid Metal Battery Maker Ambri Inc.
Laboratory and Research Supplies and Equipment

Edgetech Instruments Inc. Moisture Analyzers Assist Innovative Liquid Metal Battery Maker Ambri Inc.

Edgetech Instruments provides Ambri, a manufacturer of innovative liquid metal batteries located in Marlborough MA, with the PPM 1 Trace Moisture Analyzer from their facility in neighboring Hudson, MA. The PPM 1 sensor utilizes a proprietary P205 (phosphorous pentoxide) technology to provide accurate, long term trace moisture measurement at low Parts Per Million by Volume (PPMv) moisture levels....

Read More »
L-com Releases M12 and M8 Field Term Connectors, Couplers, Adapters and Receptacles to Address Industrial Connectivity Applications
Electrical Equipment & Systems

L-com Releases M12 and M8 Field Term Connectors, Couplers, Adapters and Receptacles to Address Industrial Connectivity Applications

NORTH ANDOVER, MASS. - JANUARY 26, 2018 - L-com Global Connectivity, a preferred manufacturer of wired and wireless connectivity products, announced today that it has introduced a new line of M12 and M8 connectors, adapters, receptacles and couplers to address harsh environment connectivity applications. These new products are designed for industrial control and factory automation, test...

Read More »
Rinco Ultrasonics to Introduce AGM Pro Ultrasonic Generator for Automated Welding at NPE2018
Cleaning Products & Equipment

Rinco Ultrasonics to Introduce AGM Pro Ultrasonic Generator for Automated Welding at NPE2018

DANBURY, Conn., January 25, 2018 – Rinco Ultrasonics USA, a leading manufacturer of ultrasonic welding equipment, will launch its new AGM Pro ultrasonic generator at NPE2018 May 7-11 at the Orlando County Convention Center in Orlando, Fla. (Booth #W5373). The new ultrasonic generator is designed to be built into automation lines and special- purpose machines for controlling ultrasonic...

Read More »
Series 9200 PetroAlert Gas Analyzer comes with dual-flame ionization detectors.
Laboratory and Research Supplies and Equipment

Series 9200 PetroAlert Gas Analyzer comes with dual-flame ionization detectors.

Series 9200 PetroAlert Gas Analyzer is used for both gas chromatography and total hydrocarbon analysis. Units GC detector performs C1 to C5 analysis with detection limit of < 10 ppm as methane whereas THA detector monitors total hydrocarbons down to 0.003% and up to 100% as methane. Analyzer comes with programmable touchscreen and automatic calibration feature. Unit allows remote accessibility...

Read More »
Fresh Air Intake
Sponsored

Fresh Air Intake

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics