Electrical Kit meets contractor's everyday needs.
Electrical Kit TK-30 is comprised of DM-20 manual ranging multimeter, GT-11 voltage detector, and GT-10 polarity cube. Model DM-20 measures current of small electronic circuits, ac/dc voltage, dc amperage, resistance, and also checks 9 V batteries. Offering non-contact voltage detection, Model GT-11 provides LED and audible alarm if voltage is present. Model GT-10 troubleshoots 120 Vac grounded...
Read More »Starter Kit aids in MCU development and programming.
To facilitate development of and experimentation with PICÃ-® microcontrollers, PICkit(TM) 2 Starter Kit connects to PC via full-speed USB 2.0 and allows for firmware upgradeability. It requires no additional power supply for programmer or target application board, and included set of tutorials lets users learn at their own pace. Form factor requires minimal workbench space and can plug into...
Read More »
CANopen Starter Kit offers educational motion control tool.
CAN-STEPCON (CANopen) starter kit enables PC users to gain experience with CANopen motion control in stepper motor applications. It contains CANopen stepper motor controller, CAN-STEPCON-1H; I/O wiring; 100-240 Vac/47-62 Hz power supply; and CAN network. Included CAN-USB-Mini interface module, with bit rate up to 1 Mbps, acts as CANopen Manager, while CAN-STEPCON-1H acts as slave. Provided with...
Read More »
Mobile Spill Kit is mounted on 5 in. rubber wheels.
Available in bright orange as well as custom colors, PIGÃ-® Spill Kit in a Storage Chest enables quick response and containment of up to 79 gal spills of oil, coolant, solvent, and water. Self-contained unit provides access to absorbent mats, socks, and wipers as well as reference materials. Constructed of UV-inhibited polyethylene, container can be stored indoors or outdoors and has lockable...
Read More »
Considerations for Choosing a Plastic Injection Molder
Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.
Read More »
Epoxy Gel repairs concrete floors.
Epoxi Gel Patch is a 100% solids epoxy gel for patching cracks, divots, and other minor deformities in concrete floors. Components come in factory-portioned units to eliminate mixing errors. Smooth consistency enables product to be applied with spatula, spackle knife, or flat trowel. Epoxi Gel Patch is suited for use in facilities that limit use of solvents and fine, loose silica.
Read More »Development Kits aid Nios II, DSP, and PCI design process.
Based on Cyclone(TM) II FPGAs, development kits facilitate prototyping of NiosÃ-® II embedded processor, DSP, and PCI designs. Each kit includes Cyclone II development board, CD with documentation and reference designs, and power supply as well as necessary cables, QuartusÃ-® II design software, and suite of interface IP cores. Nios II Development Kit provides everything needed for...
Read More »
Sealant Detection Kit prevents damage to recovery equipment.
Suited for both R134A and R12 systems, QuickDetect A/C Sealant Detection Kit includes A/C coupler, hose, test cartridge, and flow meter. When connected to mobile A/C system, it mimics A/C leak. If sealant is present in system, it will quickly solidify in disposable test cartridge and cause flow meter to show no-flow. Except for test cartridges, all Quick Detect components are reusable. Additional...
Read More »
Multi-Parameter Test Kit is fiber-optic based.
Dynamic Multi-Parameter Test Kit comes with BUS Commander Software and variety of Fabry-Perot fiber optic sensors, including temperature, pressure, strain, and refractive index sensors. BUS signal conditioner and acquisition system is configured with 2 channels, offering simultaneous reading with sampling rate to 1,000 Hz. System is upgradeable to up 8 channels per chassis, can be cascaded, and...
Read More »
Development Kit works with high-voltage DACs.
HVDAC DevKit, model UVK-HVDAC200-4, provides plug-and-play platform for evaluation and prototype development using HVDAC200-4 quad, 9-bit, serially configurable voltage/current DAC with outputs of up to 200 V. Kit comes with WindowsÃ-®-based demo program and consists of Goal VERSA MIX 8051 MCU, onboard voltage reference, and 2 adjustment potentiometers. Kit also offers over-temperature and...
Read More »DSP Co-Processing Kit includes Cyclone II FPGA.
DSP Development Kit, Cyclone(TM) II Edition, allows users to design, prototype, and debug digital signal processing (DSP) co-processing applications for various applications. It includes Cyclone II FPGAs, Texas Instruments' (TI) ADS5500 ADCs, and interface to TI's DSP starter kits. Platform also supplies users with development board, Mathworks' Simulink software, DSP Builder, and QuartusÃ-®...
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
