Modular Heater provides concentrated, high power.
Induction Heaters

Modular Heater provides concentrated, high power.

High Power Reflector, a 40 kW fiber-insulated, modular heater, for use in foundry and metal processing industries, is designed for power up to 10 kW/ftÂ-² at 1650°C. Each module consists of heating elements set into ceramic fiber and contained in sheet-steel casing. Standard unit is 24 x 24 in. and multiple units can be joined together in rows or squares. Heater is suitable for single...

Read More »
Heaters conform to curved cylindrical and 3D surfaces.
Other Process Heaters

Heaters conform to curved cylindrical and 3D surfaces.

Custom designed for each application, Molded-To-Shape® heaters are designed with single and multi-layer etched or wire wound circuits. Single, multiple, and variable watt densities can be designed into heaters. Available dielectric substrate materials include silicone, polyimide, neoprene, and polyester. Used to prolong battery life in cold environments, heaters suit aerospace electronics,...

Read More »
Induction Heating Systems provide continous heating.
Induction Heaters

Induction Heating Systems provide continous heating.

Induction Heating Systems provide non-contact, continuous heating with accurate temperature control in compact coil designs. For wire and cable applications, systems can provide normalizing, stress relieving, annealing, hardening, curing, and coating. Processes can be completed while wire or cable is moving through coil. Induction heating provides high temperatures (4000°F) necessary to...

Read More »
Portable Heater keeps workers and equipment warm.
Heaters

Portable Heater keeps workers and equipment warm.

Maxi-Heat features indirect fired design, which eliminates problem-causing moisture. Unit draws in and heats outside air, delivering contaminant-free, warm, dry air. Enclosed twin heater units are rated at total output of 1,000,000 BTUs per hour delivering maximum of 5600 cfm, with as much as 180°F temperature rise above ambient. Maxi-Heat uses Isuzu power unit and 191 gal fuel tank,...

Read More »
Heaters prevent pipes from freezing.
Heaters

Heaters prevent pipes from freezing.

Able to heat pipes in high altitudes and cold climates, Spiral heaters are available with different heating element designs, including single and multi-layer etched circuits and single and multi-layer wire wound circuits. Single, multiple, and variable watt densities can be designed into spiral heaters to suit specific application needs. Dielectric substrate materials available include silicone,...

Read More »
Induction Heating Equipment also quenches and cools parts.
Induction Heaters

Induction Heating Equipment also quenches and cools parts.

IHScanner vertical scanning system has solid state power supply, dual spindle heat treating system, and part quenching and recirculating components. It is capable of heat treating cylindrical parts from 0.38 to 1.00 in. dia and up to 17 in. in length. It is available in power ratings from 25 to 100 kW and frequencies from 25 to 200 kHz. System is shipped ready to operate, requiring only 3-phase,...

Read More »
Insertion Heaters are split along length of cartridge sheath.
Heaters

Insertion Heaters are split along length of cartridge sheath.

Model SST has single split sheath, with 2 sections that expand outward. QST, or Quad model has additional sections that expand outward in 4 directions. Both have single-circuit design, provide sheath temperatures up to 1400°F, and watt densities up to 100 W/sq in. Heaters have Incoloy® sheath and ceramic bushing under potting cap providing isolation of connector. SST ranges from 3/8...

Read More »
Immersion Heaters warm up liquids in tanks and drums.
Immersion Heaters

Immersion Heaters warm up liquids in tanks and drums.

Over-the-Side heaters are suitable for heating clear, opaque, or hard-to-heat liquids ranging from water to raw crude. Heaters are available in many configurations with capacities from 8 to 120 kW and lengths from 21 to 124 in. They have welded incoloy heating elements that resist corrosion, sealed terminals, and welded spacers. Heaters may be removed for cleaning or repairs.

Read More »
Water Heater and Booster are made of stainless steel.
Water Heaters (HVAC)

Water Heater and Booster are made of stainless steel.

Indirect Water Heater and Booster maintain hot water temperature with heat loss of under 1/2° per hour. This is made possible via 2 in. CFR Flame Retardant soft foam insulation. Reinforced stainless steel tank base eliminates pressure stress on tank bottom. Aquastat control (thermostat) sits within well space, which enables replacement if tank needs to be drained. Construction includes...

Read More »
Photoresist Oven allows automated handling of 300 mm wafers.
Heaters

Photoresist Oven allows automated handling of 300 mm wafers.

Company's 300mm Automated Photoresist Bake Oven offers 2 Front-Opening Unified Pod (FOUP) loadport stations with atmospheric Class 1 clean room-compatible robots and optically based Class 1 laser cassette mapping sensors. Its 2 heat treatment chambers hold 25 wafers each during photoresist bake cycle. Temperature uniformity is +/-1.5 deg C at 95 deg C operating temperature (150 deg C max). It...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers