New ATEX Heaters Features Temperature Controlling Range up to 450 Degree Celsius
Designed to protect contents of bulk containers such as drums, IBC tanks and gas bottles from damage due to cold temperatures. Features operating temperature control, high-limit temperature limiter, power limiting control and 25-amp capacity. Containers include 200-220 litre/55-gallon drums, 1000 litre/250-gallon IBC tanks, and 10, 50, and 79-litre gas bottles.
Read More »
UltraFlex Brazing Carbide onto a Steel Piece in Under 20 Seconds Using Induction
[April 18, 2019] A recent demonstration by UltraFlex aimed at showing how induction heating can be used to optimize the process of brazing carbide onto a steel piece. The company - a leading manufacturer of innovative digitally-controlled induction heaters - used a 5 kW compact induction heating system from their UltraHeat SM series in this test application. UltraHeat SM heaters are easy to tune...
Read More »
Latest Corrosion Resistant Hot Plates and Stirrers are Suitable for Acid Digestions
Offered in 432 x 318 x 134 mm (Deep x Wide x Tall) dimensions and support more than 22.6 kg on plate surface. Available in 115VAC/60Hz, 220VAC/60Hz, and 230VAC/50Hz and come with main AC on/off switch. Feature 5 or 9 stirring positions that can stir corrosive aqueous solutions from 100 to 1500 rpm.
Read More »
UltraFlex Using Induction Heaters for Nuclear Research Applications
[Mar 1st, 2019] A recent induction heating demonstration by UltraFlex Power Technologies showed how induction heaters could be successfully used for nuclear research applications. The objective of the demonstration, set up per request of a potential customer, was to heat spheres in a fluid flow of 1-5 gal/min to 96°C (200°F). The temperature reached had to be then maintained for an hour, for...
Read More »
Hot Forging Process
Check out this white paper to learn about the benefits of hot forging.
Read More »
Ambrell to Exhibit at HOUSTEX 2019 in Houston, TX USA
See an induction heating demonstration and speak to Dr. Dahake from THE LAB Rochester, NY — Ambrell, an inTEST Company and a leading manufacturer of induction heating solutions, will exhibit at HOUSTEX once again. The show will take place February 26-28 at the George R Brown Convention Center in Houston, TX USA and representatives will be on-hand in booth 1442. At the booth, induction heating...
Read More »
New Aqua Pro Indirect-Fired Water Heaters Available in Sizes of 30, 55, 80 or 119 Gallons
The AHRI-Certified Aqua Pro unit is built to handle harsh water conditions and designed without welds for a seamless tank construction. Lightweight non-metallic tank allows for easy maneuverability and installation in basements, storage rooms or other tight spaces. Features a removable copper finned high-output coil, a durable brass drain valve and two-inch foam insulation.
Read More »
UltraFlex De-Brazing and Brazing Carbide Tips Using Induction Heating
Jan 29th, 2019 - In a recent customer-requested test application, UltraFlex Power Technologies proved the efficiency of de-brazing and re-brazing carbide tips onto milling cutter tools using an induction heater. UltraFlex manufactures the most advanced digitally controlled induction heating solutions in the industry and its engineers were confident that induction heating would reduce the time...
Read More »
UltraFlex using a Handheld Induction Heater to Braze Steel Mesh Belts
[Jan 7th, 2018] Induction solutions are already successfully replacing torch-based brazing in a variety of manufacturing applications - this has been the engineers’ conclusion after recent UltraFlex demonstrations aimed at showing the induction-based brazing process for two magnetic steel mesh belts. The demonstration had been carried out per request of a potential UltraFlex customer, currently...
Read More »
UltraFlex Preheating Stainless Steel with Induction Heater
[Nov 26th, 2018] Another successful application of Induction heating for manufacturing purposes has recently been demonstrated by UltraFlex Power Technologies. The company - provider of the most innovative digitally controlled induction heaters in the industry - showed how a stainless steel cylinder could be heated at different temperature on the inside and outside, within less than a minute. The...
Read More »
Modine Presents New BTP Power Vented Heater with Factory Installed Blower Assemblies
The BTP Power Vented Heater is available in seven sizes in the range of 150,000 – 400,000 BTUs. The product comes with 409 stainless steel primary heat exchanger and delivers 82 percent thermal efficiency. The heater is certified to ELT standards for use in commercial and industrial environments. The device allows for higher mounting heights and various air flow settings for use in larger...
Read More »
Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application
Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.
Read More »
