UltraFlex Brazing Copper Cylinder to Copper Wire in 5 Secs Using Handheld Induction System
[Feb 6th, 2019] UltraFlex - manufacturer of the most advanced digitally controlled induction solutions in the industry - has recently demonstrated the successful application of their handheld induction system UBraze for time-efficient and high quality induction brazing. The application scenario required brazing of copper cylinder to copper wire at target temperature of 1600°F (871°C). To...
Read More »
UltraFlex Forging Titanium at 1750 Degrees F (954 Degrees C) within 55 Seconds Using Induction Heating
[May 9th, 2019] A recent test by UltraFlex Power Technologies demonstrated how induction heaters may efficiently replace industrial oven heating for titanium forging. UltraFlex - a leading manufacturer of advanced, digitally controlled induction heating solutions - is continuously proving the energy- and cost-efficiency of induction heating in manufacturing, by showcasing test application results...
Read More »
UltraFlex Induction Soldering Litz Wire into Aluminium Lug in 25 Seconds
[May 3rd, 2019] A recent test application by UltraFlex Power Technologies proved that induction soldering was a faster and more cost-efficient method for soldering a litz wire onto an aluminum lug compared to torch-based soldering. The test application had been requested by a customer using torch heating for this process. The customer was looking to achieve better control over the soldering time...
Read More »
UltraFlex Brazed Stainless Steel Tubing to Fittings in 30 Seconds using Induction Heater
Feb 21st, 2019] A series of test applications performed by UltraFlex Power Technologies showed the time- and energy-efficiency of induction brazing for producing high quality joints. In the tests, stainless steel tubing had to be brazed to three different types of fittings - 1.75″(44.45mm) Hexagon fitting, 1.58″(40.13mm) short circle fitting and 1.58″(40.13mm) long circle fitting. The...
Read More »
A True Game-Changer For Walk-In Unit Frame Performance
This white paper outlines the eight reasons why the FUSIONFRAME system is the superior thermal envelope system. Download now to find out more.
Read More »
New ATEX Heaters Features Temperature Controlling Range up to 450 Degree Celsius
Designed to protect contents of bulk containers such as drums, IBC tanks and gas bottles from damage due to cold temperatures. Features operating temperature control, high-limit temperature limiter, power limiting control and 25-amp capacity. Containers include 200-220 litre/55-gallon drums, 1000 litre/250-gallon IBC tanks, and 10, 50, and 79-litre gas bottles.
Read More »
UltraFlex Brazing Carbide onto a Steel Piece in Under 20 Seconds Using Induction
[April 18, 2019] A recent demonstration by UltraFlex aimed at showing how induction heating can be used to optimize the process of brazing carbide onto a steel piece. The company - a leading manufacturer of innovative digitally-controlled induction heaters - used a 5 kW compact induction heating system from their UltraHeat SM series in this test application. UltraHeat SM heaters are easy to tune...
Read More »
Latest Corrosion Resistant Hot Plates and Stirrers are Suitable for Acid Digestions
Offered in 432 x 318 x 134 mm (Deep x Wide x Tall) dimensions and support more than 22.6 kg on plate surface. Available in 115VAC/60Hz, 220VAC/60Hz, and 230VAC/50Hz and come with main AC on/off switch. Feature 5 or 9 stirring positions that can stir corrosive aqueous solutions from 100 to 1500 rpm.
Read More »
UltraFlex Using Induction Heaters for Nuclear Research Applications
[Mar 1st, 2019] A recent induction heating demonstration by UltraFlex Power Technologies showed how induction heaters could be successfully used for nuclear research applications. The objective of the demonstration, set up per request of a potential customer, was to heat spheres in a fluid flow of 1-5 gal/min to 96°C (200°F). The temperature reached had to be then maintained for an hour, for...
Read More »
Ambrell to Exhibit at HOUSTEX 2019 in Houston, TX USA
See an induction heating demonstration and speak to Dr. Dahake from THE LAB Rochester, NY — Ambrell, an inTEST Company and a leading manufacturer of induction heating solutions, will exhibit at HOUSTEX once again. The show will take place February 26-28 at the George R Brown Convention Center in Houston, TX USA and representatives will be on-hand in booth 1442. At the booth, induction heating...
Read More »
New Aqua Pro Indirect-Fired Water Heaters Available in Sizes of 30, 55, 80 or 119 Gallons
The AHRI-Certified Aqua Pro unit is built to handle harsh water conditions and designed without welds for a seamless tank construction. Lightweight non-metallic tank allows for easy maneuverability and installation in basements, storage rooms or other tight spaces. Features a removable copper finned high-output coil, a durable brass drain valve and two-inch foam insulation.
Read More »
New Davenport Hybrid Machine Offers Unique Flexibility for Parts Manufacturing
The Davenport Hybrid machine offers greater flexibility, easier set-ups, and faster cycle times. Check out the video to learn more.
Read More »
