Sheet Molding Compound Preheater is effective for thick bosses and structures.
Heaters

Sheet Molding Compound Preheater is effective for thick bosses and structures.

Macrowave(TM) SMC Preheater for plastic sheet molding compound (SMC) utilizes Radio Frequency Heating Technology and provides uniform heating throughout entire thickness of compound. Capable of preheating SMC loads up to 30 x 84 in. in less than 1 min, system has PLC which controls heat cycle time, power level, and conveyor movement to synchronize with press operation. Product's conveyor can feed...

Read More »
Heaters

Heating System targets long-distance pipelines up to 15 miles.

Using single power supply, Skin-Effect Heating System provides freeze protection, temperature maintenance, and heat-up. Small steel tube containing skin-effect electric cable is banded onto pipe to transfer conductive heating directly to pipe wall. Heat input can be adjusted up to 300°F to handle range of thermal viscosities, including water, crude or refined oils, steam, and variety of...

Read More »
Solar Air Heater optimizes efficiency via true match airflow.
Miscellaneous Controls

Solar Air Heater optimizes efficiency via true match airflow.

Item No. SAC120CFM, Solar Air Heater Fan with Controller, is factory set to end-user's specification. Using thermistor to constantly monitor inside panel temperature, controller ensures critical airflow matching for optimal efficiency. Solar air heater programmable circuit design enables preset temperature settings, which enable fan to ramp up/down depending on inside panel temperature.

Read More »
Polygon Adds Direct-Fired Heaters To Construction Drying Services Offering
Drying Services

Polygon Adds Direct-Fired Heaters To Construction Drying Services Offering

Units Offer Energy Efficient Heating Solution (AMESBURY, MASS.,) - Polygon has added energy-efficient direct-fired heaters to its construction drying services offering to help general contractors and construction personnel maintain proper temperatures on jobs sites during the cold winter months. "Winter construction projects present their own special challenges and heat is often needed to ensure...

Read More »
Eraser Co. to Display Products at the MD&M West Expo: Booth #1745
Tube / Pipe / Hose Cutters and Cutting Machinery

Eraser Co. to Display Products at the MD&M West Expo: Booth #1745

(Syracuse, NY): The Eraser Company, Inc., manufacturers of wire, cable and tube processing equipment, will display their top quality industrial processing equipment at the 2011 Medical Device Manufacturing West Expo (MD&M West) from February 8th through the 10th in Anaheim, CA. This exciting show provides Eraser with the perfect venue for hands-on demonstration of their world-class medical...

Read More »
Infrared Heaters

CCI Thermal Technologies Inc. is proud to Introduce the Cata-Dyne(TM) LS, Liquid Start Catalytic Heater

Edmonton - CCI Thermal Technologies Inc is proud to announce the release of the Cata-Dyne(TM) LS. With the same reliability, versatility and ingenuity of the Cata-Dyne(TM) family of heaters the Cata-Dyne(TM) LS has been coupled with an evolution in technology improving start-uptimes from 15 minutes to less than 5 minutes, while simplifying the installation and lowering costs. CCI Thermal centered...

Read More »
Heaters

Engine Oil Preheater Kits target air-cooled engines.

Available in sizes based on 120 or 240 V energy needed for capacity of housing, Universal Low Watt Density Preheater(TM) Kits feature flexible silicone/fiberglass heating pad that mounts to outside of housing using permanent adhesive. Flexible ceramic insulation is mounted on top of preheater to keep electrical energy draw low. Preheater converts metal of housing into heat transfer element,...

Read More »
Digital Stirring Hot Plate provides 5 stirring positions.
Other Process Heaters

Digital Stirring Hot Plate provides 5 stirring positions.

Suited for laboratories where reproducible, hands-off sample preparation and experimentation are required, EchoTherm(TM) Model HS65 features 12 x 12 in. solid ceramic glass heater plates that can be heated from ambient to 400°C. Stirring speed is 100-1,500 rpm and controlled by optical coupler to 10 rpm. With Model HS65, programming is done through front panel membrane switch and full-function...

Read More »
Hybrid Ventilation Unit incorporates energy recovery capability.
Heaters

Hybrid Ventilation Unit incorporates energy recovery capability.

Designed to help meet standards of acceptable levels of indoor air quality (IAQ), Z Series integrates energy recovery wheel into dedicated heat pump system for ventilation and temperature control. Unit can recover more than 80% of exhaust air energy year-round, and energy efficiency ratio (EER) is greater than 17 in cooling mode. In heating mode, coefficient of performance is greater than 10.

Read More »
Induction Hardening & Tempering System for Drivetrain Components
Induction Heaters

Induction Hardening & Tempering System for Drivetrain Components

Madison Heights, MI - Inductoheat, Inc., the world's leading induction heating equipment manufacturer, recently shipped an induction hardening and tempering system to a major drivetrain component supplier. This machine is designed specifically for hardening and tempering hub spindles and outer ring hubs. This equipment is comprised of a STATISCAN® IV system for induction hardening, using...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics