Autoclaves

BriskHeat Selected Again to Supply Out-of-Autoclave Composite Heating Solution

Columbus,OH –Â- BriskHeat Corporation's configurable heating system has been selected again by another major aerospace industry Original Equipment Manufacturer for an out-of-autoclave composite curing solution. This is the second customer to choose BriskHeat for composite curing in the past three months. BriskHeat's out-of-autoclave heating system is capable of providing precise and...

Read More »
Desiccant and Membrane Dryers

GEA Barr-Rosin Supplies Its First Biomass Heated SSD(TM) System to AB Amilina in Lithuania

GEA Barr-Rosin recently secured a landmark contract with AB Amilina, in Panevezys, Lithuania to retrofit its SSD™ (Superheated Steam Dryer) technology to an existing wheat feed ring dryer as part of the modernisation of the company's existing wet wheat mill. The project will be completed by the mid of 2014.Â-  GEA Barr-Rosin's SSD™ technology won the GEA Innovation Award in 2003 for its...

Read More »
Ambrell to Exhibit at Wire Dusseldorf 2014
Induction Heaters

Ambrell to Exhibit at Wire Dusseldorf 2014

Induction heating systems for wire heating applications will be displayed, and application experts will be on-hand to discuss projects Scottsville, NYÂ- — Ambrell, a leading manufacturer of induction heating systems, will be exhibiting at Wire Düsseldorf in Düsseldorf Germany on April 7-11, 2014. Ambrell will exhibit in Hall 11 at booth C74 at the Düsseldorf...

Read More »
Heaters

Electrical Ladle Heaters offer 70% net efficiency.

By heating ladles with electricity instead of gas, Kanthal Heaters enable aluminum producers and steel foundries to lower energy costs and CO2 emissions. Design allows same heater tube to be used for both heating and holding. Heating elements are arranged in reflector, allowing radiation to be accurately directed toward target area. With uniform temperature profile and no flame or streaming of...

Read More »
Laboratory Cold/Hot Plates heat up to +150°C.
Other Process Heaters

Laboratory Cold/Hot Plates heat up to +150°C.

Designed for laboratory research, cascade Model AHP-1200C31 ranges from -50 to +150°C, while single stage Models AHP-1200CPV and AHP-301CPV can reach -15 to +120°C. Thermoelectric systems incorporate temperature controller, data logging software, internal-to-external temperature switching, and RS-232 communications. With no moving parts, maintenance-free systems are suited...

Read More »
Ambrell Sells EKOHEAT for Forming Application
Induction Heaters

Ambrell Sells EKOHEAT for Forming Application

Client replaces cold bending/oven tempering process with more efficient induction process Scottsville, NYÂ- — Ambrell, a leading manufacturer of induction heating systems, has installed an EKOHEAT 65 kW/100 kHz induction heating system for stress relieving steel bars. The client was cold bending bars and then tempering them with an oven. The steel bar requires a 50 mm heat zone. The client...

Read More »
Other Process Heaters

UHPLC Columns contain monodisperse sub-2 µm porous silica.

Manufactured using Ecoporous™ silica process, Supelco® Titan UHPLC Columns offer performance greater than 250,000 plates/meter. Uniform particles are packed into rugged column beds that are stable over range of flow and pressure conditions. Columns optimize productivity of pharmaceutical and contract research organizations employing UHPLC for medicinal chemistry, toxicology, and clinical...

Read More »
Extended Temperature Ranges for Laboratory Research
Other Process Heaters

Extended Temperature Ranges for Laboratory Research

TECA (Chicago, IL) laboratory cold/hot plates can now heat up to +150°C. Designed for laboratory research, TECA introduces high temperature versions of several cold/hot plate models. A cascade system can boast a range of -50°C to +150°C (Model AHP-1200C31). Single stage systems AHP-1200CPV and AHP-301CPV can reach -15°C to +120°C. Versatility in the temperature range...

Read More »
Inline Heater suits high-purity solvent heating applications.
Heaters

Inline Heater suits high-purity solvent heating applications.

Constructed of electropolished 316L stainless steel withÂ- PFA and PTFE wetted surfaces, Frontier™ Series can be used in single pass or recirculating applications for safely heating chemistries such as EKC265, EKC8730, ST28, ST26, ACT690C, and IPA. Unit includes ½, ¾, and 1 in. tube stub fluid connections and accommodates flow rates up to 75 lpm at pressure...

Read More »
Immersion Heaters

Tranter and Westinghouse Sign Teaming Agreement to Provide Modular Low-Pressure Shell and Plate Feedwater Heaters (SP-FWH)

Wichita Falls, TX – Tranter, Inc. and Westinghouse Electric Company LLC., have entered into a teaming agreement to develop a new modular Shell and Plate Feedwater Heater (SPFWH) for use in the power industry. There has been virtually no change in traditional shell and tube feedwater heater designs over decades. Welded shell and plate heat exchangers are a recent technology based on gasket plate...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics