Latest Melt Pumps are Equipped with Multilayer Heating Arrangement
Available in five sizes, with capacities ranging from 1,164 to 4,900 cc per revolution. Increase product consistency that makes it possible to run thinner layers. Designed to speed up installation, simplify maintenance, and streamline the selection of spare parts.
Read More »
POLYGUARD PFA Lined, Mag-Drive Gear Pumps from Liquiflo
Non-Metallic Wetted Parts with Metallic Gear Pump Performance The Liquiflo POLYGUARD has NO metallic wetted parts, a mag-drive coupling with a PFA lined Containment Can and a stainless steel housing lined with PFA. Poly-Guard combines the chemical resistance of a fluoropolymer with the strength of stainless steel. Max temperatures to 200° F & differential pressures up to 100 psi. POLY-GUARD...
Read More »
BlueFlow Gear Pumps include pressure and temperature sensors.
Offered in EP, MP and RP series, BlueFlow Gear Pumps are widely used in all geographic locations. Featuring 15% greater throughput without increasing rpm, pumps have a full range of sealing types along with cooling fins and has consistent melt properties with sensors. Product comes in a range of pumping capacities from 33 to 3,201 cc/revolution for throughput ranges up to 12,000 kg/hr. Pumps are...
Read More »2013 PM Technology Review Article
2012/2013 Developments: PM part suppliers are not immune from the increasingly tight tolerances being demanded by customers.Ã- In the case of precision ground PM parts, such as variable valve timing (VVT) components and gerotors, deburring/edge break specifications are also tightening.Ã- Because these parts are often ground to tolerances of a few microns, the added challenge is removing...
Read More »
Choosing the Best Industrial Facial PPE Supplier: 5 Key Factors
Paulson is an industry leader in PPE production, most notably face and eye protection. Learn more now about what factors are most important to consider when choosing a PPE supplier.
Read More »Maag Breaks New Ground in Gear Pump Technology with the Release of Its 6th Generation Series of Pumps
Maag Pump Systems unveils a brand new gear pump portfolio of products delivering up to 50% higher performance. “The best just got better” may be an overworked phrase yet it could not be truer in the case of the Swiss-based market leader. With the launch of its 6th generation gear pumps, to be first unveiled at the K’2013 show, Maag redesigned every single component featured in its pump...
Read More »
Mini Peristaltic Pumps feature 4 x 4 in. footprint.
Offering choice of 8, 12, 17, or 25 rpm drives,Ã- TPT Pumps provide flow rates from 1–30 mL/min. UnitsÃ- are powered by continuous duty, 24 Vdc brush-style gearmotor with internal permanent magnet. Direction of flow is reversible, clockwise or counterclockwise using control switch. Constructed with rigid metal housing, pumps have aluminum square tube and top and bottom plates as well as...
Read More »
Magnetic Drive Gear Pumps feature pulsation-free operation.
Constructed with AISI 316 SS housings and internal parts, PTFE or PEEK gears, and totally sealed pump chamber, MG200 Series is suitable for wide range of corrosive liquids. Units are noiseless and capable of handling hot liquids up to 248Ã-
Read More »
Gear Pumps transfer water to 2.6 gpm and oil to 52.9 gph.
Constructed with helical bronze gears, nickel-plated brass body, and stainless steel shaft, UP2/Oil Gear Pumps transfer both water and engine oils. UP2/P Gear Pumps, featuring PTFE gears, are suitable for transferring fresh and salt water as well as diesel fuel. All electricÃ- pumps are self-priming and measure just 4 3/8 in. in length to fit in tight spaces.Ã- Ã- Available in 12 or...
Read More »
Internal Gear Pumps have seal-less design.
Designed forÃ- critical fluids transfer, EnviroGearÃ-® Seal-less Internal Gear PumpsÃ- come in ductile-iron, carbon steel, and stainless steel. Seal-less design with between-the-bearing support system eliminates leaks and mechanical wear. Also, magnets mounted directly to rotor eliminate adapter plate and allow forÃ- single-fluid chamber. This provides short, simple flow path and...
Read More »
Pump Solutions Group (PSG-®) Announces the Launch of Maag Industrial Pumps
Oakbrook Terrace, IL, USA, –Pump Solutions Group (PSGÃ-®), a business unit within Dover Corporation (NYSE: DOV) and a global leader of positive displacement pumps and systems technologies, is pleased to announce that it is introducing a new product platform: Maag Industrial Pumps. The Maag Industrial Pumps platform combines PSG’s existing external/internal gear and screw pump technologies...
Read More »
TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »
