Latest Melt Pumps are Equipped with Multilayer Heating Arrangement
Available in five sizes, with capacities ranging from 1,164 to 4,900 cc per revolution. Increase product consistency that makes it possible to run thinner layers. Designed to speed up installation, simplify maintenance, and streamline the selection of spare parts.
Read More »
POLYGUARD PFA Lined, Mag-Drive Gear Pumps from Liquiflo
Non-Metallic Wetted Parts with Metallic Gear Pump Performance The Liquiflo POLYGUARD has NO metallic wetted parts, a mag-drive coupling with a PFA lined Containment Can and a stainless steel housing lined with PFA. Poly-Guard combines the chemical resistance of a fluoropolymer with the strength of stainless steel. Max temperatures to 200° F & differential pressures up to 100 psi. POLY-GUARD...
Read More »
BlueFlow Gear Pumps include pressure and temperature sensors.
Offered in EP, MP and RP series, BlueFlow Gear Pumps are widely used in all geographic locations. Featuring 15% greater throughput without increasing rpm, pumps have a full range of sealing types along with cooling fins and has consistent melt properties with sensors. Product comes in a range of pumping capacities from 33 to 3,201 cc/revolution for throughput ranges up to 12,000 kg/hr. Pumps are...
Read More »
Quiet Vane Pumps are designed for machine lubrication.
Used for closed loop lubrication systems in open gear drives and similar applications, ML series is built on Whisper Vane pump technology and optimized for machine lubrication. ML-4 can make up to 4.0 gpm, while ML-2 makes up to 2.6 gpm. Both have same dimensions, which facilitates configuration and integration while allowing interchangeable flow rates. Also included, integrated bypass valve can...
Read More »
Top Metal Stamping Trends of 2020
This white paper provides an in-depth look into metal stamping trends.
Read More »
Electric Gear Pumps fit in tight spaces.
Available in 12 and 24 Vdc versions with flow rates to 2.6 gpm for water and 52.9 gph for oil, UP2 Series is suited for applications with max operating temperature range of 14–140°F. Units measure 3 x 5 x 4 3/8 in. and are self-priming to 4.92 ft. UP2/Oil Gear Pumps feature bronze gear construction and are designed for transfer of engine oils, fresh water, or other non-corrosive viscous...
Read More »
Nordson Kreyenborg Innovations in Melt Filtration Systems Will Be Highlighted at Nordson Corporation's Fakuma Exhibit
MÃ-œNSTER, GERMANY, - Nordson Corporation will highlight the entire line of Nordson Kreyenborg melt filtration systems, gear pumps, and melt valves at Fakuma 2015 (Stand A6-6406). Among the innovations in Nordson Kreyenborg melt filtration systems are: • Self-cleaning screen changer. The V-Type screen changer has an automated, hydraulically powered backflush system that purges even...
Read More »Gear Pumps feature optional pressure control.
Designed for small scale water and process systems, Series UP6 is available with optional microchip-based control circuit which acts as electronic brain to control flow rate and prevent dry running.Â- Self-priming, electrical pumps provide flow rates to 6.9 gpm at pressures up to 29 psi and are available in 12 or 24 Vdc versions. Constructed with helical bronze gears, nickel-plated...
Read More »
TRW Launches Dual Stage Transmission Oil Pumps
LIVONIA, Mich.Â- – TRW Automotive Holdings Corp. (NYSE:TRW) has announced that it has started production of its dual stage pump technology across two major European vehicle platforms. The dual stage pump is TRW's latest innovation in pump technology. It is highly suitable for wet dual clutch transmissions due to its ability to integrate two external gear pumps in a compact single...
Read More »Magnetic Drive Gear Pumps handle hot liquids up to 248°F.
Featuring AISI 316 stainless steel housings and internal parts, PTFE or PEEK gears, and totally sealed pump chamber, MG200 Series can transfer corrosive and non-corrosive liquids up to 210 lph, with pressures to 5 bar. Noiseless, pulsation-free units feature 24 V brushless DC motor and Variotronic speed control system. Designed with 1/8 in. NPT female threads on In/Out ports, pumps are suited for...
Read More »
HAWE is Shaping the Way You Save Energy
CHARLOTTE, N.C. – HAWE Hydraulics, is a leading global manufacturer and supplier of sophisticated hydraulic components and controls for the mobile, industrial, and renewable energy markets. HAWE Hydraulics is exhibiting at IMTS in Chicago, IL Sept. 8th-13th - booth 4930. The company will display a wide range of products, some of which are exceptionally well suited for CNC lathes. In this...
Read More »
SRG Global Coatings Enhance Surface Durability, Efficiency, Design Flexibility
SRG Global's automotive coatings enhance the structural integrity of the finished part while also improving vehicle efficiency. Check out our video to learn more.
Read More »
