Gear Pumps

Gear Pumps

2013 PM Technology Review Article

2012/2013 Developments: PM part suppliers are not immune from the increasingly tight tolerances being demanded by customers.Â-  In the case of precision ground PM parts, such as variable valve timing (VVT) components and gerotors, deburring/edge break specifications are also tightening.  Because these parts are often ground to tolerances of a few microns, the added challenge is...

Read More »
Gear Pumps

Maag Breaks New Ground in Gear Pump Technology with the Release of Its 6th Generation Series of Pumps

Maag Pump Systems unveils a brand new gear pump portfolio of products delivering up to 50% higher performance. “The best just got better” may be an overworked phrase yet it could not be truer in the case of the Swiss-based market leader. With the launch of its 6th generation gear pumps, to be first unveiled at the K’2013 show, Maag redesigned every single component featured in its pump...

Read More »
Mini Peristaltic Pumps feature 4 x 4 in. footprint.
Gear Pumps

Mini Peristaltic Pumps feature 4 x 4 in. footprint.

Offering choice of 8, 12, 17, or 25 rpm drives,Â- TPT Pumps provide flow rates from 1–30 mL/min. Units are powered by continuous duty, 24 Vdc brush-style gearmotor with internal permanent magnet. Direction of flow is reversible, clockwise or counterclockwise using control switch. Constructed with rigid metal housing, pumps have aluminum square tube and top and bottom plates as well...

Read More »
Magnetic Drive Gear Pumps feature pulsation-free operation.
Gear Pumps

Magnetic Drive Gear Pumps feature pulsation-free operation.

Constructed with AISI 316 SS housings and internal parts, PTFE or PEEK gears, and totally sealed pump chamber, MG200 Series is suitable for wide range of corrosive liquids. Units are noiseless and capable of handling hot liquids up to 248°F. Featuring 24 Vdc brushless motor and Variotronic speed control system, pumps can transfer liquids up to 210 Lph, with pressures to 5 bar. In/Out ports...

Read More »
Gear Pumps transfer water to 2.6 gpm and oil to 52.9 gph.
Gear Pumps

Gear Pumps transfer water to 2.6 gpm and oil to 52.9 gph.

Constructed with helical bronze gears, nickel-plated brass body, and stainless steel shaft, UP2/Oil Gear Pumps transfer both water and engine oils. UP2/P Gear Pumps, featuring PTFE gears, are suitable for transferring fresh and salt water as well as diesel fuel. All electricÂ- pumps are self-priming and measure just 4 3/8 in. in length to fit in tight spaces.  Available in 12...

Read More »
Internal Gear Pumps have seal-less design.
Gear Pumps

Internal Gear Pumps have seal-less design.

Designed forÂ- critical fluids transfer, EnviroGear® Seal-less Internal Gear Pumps come in ductile-iron, carbon steel, and stainless steel. Seal-less design with between-the-bearing support system eliminates leaks and mechanical wear. Also, magnets mounted directly to rotor eliminate adapter plate and allow for single-fluid chamber. This provides short, simple flow path...

Read More »
Pump Solutions Group (PSG®) Announces the Launch of Maag Industrial Pumps
Gear Pumps

Pump Solutions Group (PSG®) Announces the Launch of Maag Industrial Pumps

Oakbrook Terrace, IL, USA, –Pump Solutions Group (PSG®), a business unit within Dover Corporation (NYSE: DOV) and a global leader of positive displacement pumps and systems technologies, is pleased to announce that it is introducing a new product platform: Maag Industrial Pumps. The Maag Industrial Pumps platform combines PSG’s existing external/internal gear and screw pump technologies...

Read More »
Micro Gear Pumps Ideal for High Pressures, Low Flows
Gear Pumps

Micro Gear Pumps Ideal for High Pressures, Low Flows

The new GAF Series of electromagnetic gear pumps from Micropump are ideal for fluids transfer applications which require chemically resistant, leak-free pumps providing high differential pressures at low flows, in a compact, yet robust package. Available from pumping specialists MICHAEL SMITH ENGINEERS, these pumps provide extended differential pressures up to 250 psi (17 bar) with precise,...

Read More »
Gear Pumps

Maag to Exhibit at Achem Asia

Maag Pump Systems AG will exhibit at Achem Asia in Beijing from the 13th through to the 16th of May 2013. The company will display a number of its popular pumps, including its brand new extrex® EA, made locally, but also a couple of models from its sister companies Automatik Plastics Machinery and Almatec. Maag will be welcoming visitors at stand H7 in Hall E. Extrex® 56-5EA –...

Read More »
Gear Pumps

Automatik Plastics Machinery to Exhibit at Chinaplas

Automatik Plastics Machinery GmbH and Maag Pump Systems AG will exhibit at Chinaplas in Guangzhou from the 20th through to the 23rd of May 2013. Automatik Plastics Machinery will display its popular SPHERO®50 as well as a locally manufactured BAOLI 200 strand pelletizer. The company will be welcoming visitors at stand B71 in Hall 5.1 The new generation SPHERO®50 features a well...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics