Form-In-Place Gasket saves time in flange assembly.
Silicone-free Type HH190 anaerobic material forms instant, pressure resistant, leak-free seal and permits adjustment up to 60 min after assembly. It allows for metal-to-metal contact, eliminating problem of re-torquing. Purple, flowable paste is non-flammable and has viscosity of 200,000 cP. Fixture time is 90 min and full cure is in 24 hr. When cured, HH190 resists most chemicals, including...
Read More »
Gaskets are highly conductive and provide EMI shielding.
Soft GORE-SHIELDÃ-® GS8000 EMI gaskets consist of nickel-plated base polymer, backed with thin foil layer and electrically conductive, pressure-sensitive adhesive. Less than 3.4 N/cm of pressure compresses gaskets from nominal starting thickness of 1 mm to thickness of 0.4 mm. At this point, DC resistance is less than 10 mOhm for a 19 mmÃ-² donut, and shielding effectiveness is greater...
Read More »
Gap Filler Materials reduce stress on solder joints.
Form-in-place, fully cured, thermally conductive THERM-A-GAPÃ-® T630 and T630G provide conformable thermal path between hot components and heat spreaders. Dispensable T630 and T630G viscoelastic pastes achieve 50% deflection at 1 psi. T630G material contains added filler of 0.010 in. dia glass beads. Both gap fillers provide thermal conductivity of 0.7 W/m-K and are capable of filling gaps...
Read More »
Safe Seal Materials protect drinking water systems.
Sealing materials meet NSF Standard 61 protecting potable water from contaminants that leach or migrate into water from traditional components. Organic materials include 10 EPDM compounds, 7 thermoplastic elastomers, and 2 nitrile compounds that can be formed into faucet and shower gaskets, water filter gaskets, valve seals and seats, pipe coupling seals, and diaphragms and O-rings used in pumps,...
Read More »
EMI/RFI Shielding Considerations for Electric Vehicles
This white paper provides an overview into EMI/RFI shielding considerations for electric vehicles.
Read More »
EMI Gaskets shield CompactPCI enclosures.
Metal spring finger gaskets provide EMI shielding of faceplate interfaces on high frequency CompactPCI industrial computing and communications systems. Gaskets meet IEEE 1101.10 EMC Front Panel reference design. They are provided in two profiles: one is available in both beryllium copper and stainless steel, and other is produced exclusively in stainless steel. Gaskets are available in standard...
Read More »
Flange Gaskets seal under low pressures.
TriGuard(TM) gaskets provide positive sealing in fluid piping on fragile flanges or flanges with irregularities, where bolt torque and gasket compression stress must be limited. Expanded PTFE material combines sealing characteristics of elastomers with temperature and chemical resistance of PTFE. Gas-tight sealing can be achieved at 250 psi. They are available in 1/2 to 28 in. ANSI ring and full...
Read More »Gasketing Material cures in place.
Non-toxic, polyether-foam, gasketing material is formulated for automotive interior and exterior Buzz, Squeak & Rattle (BSR) applications. Isosyanate-free, 2-component, black, rubber foam adheres to hard-coated acrylic polycarbonate, and resists heat up to 120Ã-
Read More »
Gasketing/Sealing Material comes in various ratings.
Gasketing and Sealing Line includes UL listed clip-on compression gaskets made of EPDM with NEMA 4 sealing and UV resistance; UL 94 flame retardant clip-on compression profiles with NEMA 4 sealing capability; and EMC conductive coated clip-on EPDM gasket profiles. UL 94 flame retardant neoprene closed-cell sealing tape is available with adhesive backing and internal cross-threading for...
Read More »
EMI-Shielding Gasket holds up in severe environments.
Form-in-place Cho-FormÃ-® 5541 is galvanic-corrosion resistant and provides electrical stability in environments such as urban gas, salt fog, and high temperatures, as well as in high temperature/high humidity cycling. Single-component, electrically conductive, silicone elastomer contains nickel-plated graphite particles. Gasket material provides shielding effectiveness above 70 dB, from 200...
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
