Gaskets

Permatex Named the Official Gasket Maker of Formula Drift
Gaskets

Permatex Named the Official Gasket Maker of Formula Drift

 Permatex served as presenting sponsor during the first race of the season in Long Beach, CA Solon, OH…Permatex®, a leading innovator in chemical technology for automotive maintenance and repair, has been named the Official Gasket Maker of Formula Drift, the premier drifting series in the United States. Permatex will provide the gasket makers for all vehicles competing in Formula Drift’s...

Read More »
Clock Spring Offers Its New Full Metal Gasket with V-Shaped Rings
Gaskets

Clock Spring Offers Its New Full Metal Gasket with V-Shaped Rings

The Full Metal Gasket™ is manufactured from a single block of metal with same material as surrounding pipe and flange. The product is offered with specially milled ridges seal 0.3 mm groove. This gasket reduces the fugitive emissions in -138°C to 650°C temperature range. The V-shaped rings reduce the torque required for tightening the flange. The full metal gasket™ is manufactured to DNV GL...

Read More »
New Right Stuff 1 Minute Grey Gasket Maker Features an Elastomeric Rubber Gasket Technology
Gaskets

New Right Stuff 1 Minute Grey Gasket Maker Features an Elastomeric Rubber Gasket Technology

Right Stuff® 1 Minute Grey Gasket Maker is offered in 3 oz. power cans, 7.5 oz. PowerBead™ pressurized can, 5 oz. cartridge, and 10.1 fl. oz. cartridge. The product is suitable for applications such as automotive gaskets, valve covers, oil pans, transmission pans and thermostat housings. It can withstand temperatures between -75ºF and 450ºF (continuous) and 500ºF (intermittent). The maker...

Read More »
Zatkoff's Die Cut Solutions in a Snap
Fittings

Zatkoff's Die Cut Solutions in a Snap

At Zatkoff Seals & Packings, we love a challenge. Our clients rely on us for innovative solutions, and we are always ready to step up to find them. Recently, a client needed a gasket that had to meet specific temperature and fluid requirements for transmission fluids. This meant that some materials were out of the question, and that whatever we did use, needed to be corrosion resistant, while...

Read More »
New Product Development for the Pipe Industry
Gaskets

New Product Development for the Pipe Industry

QCMI Corp. is proud to announce the design and successful testing of a new powdered metal type of gasket segment for use in the pipe industry.  This gasket is similar to Stainless Pipe Gasket Retaining segments but is stronger and harder, with a superior tooth sharpness.  This design was created over a long testing period to improve the quality and lead time, while providing a significant cost...

Read More »
Silicone Gaskets and Braided Hose are suitable for pharmaceutical applications.
Hose

Silicone Gaskets and Braided Hose are suitable for pharmaceutical applications.

Platinum-cured silicone gaskets are offered in 10 size options from ½ in. to 8 in. unflanged and eight flanged size options from 1 in. to 8 in. Gaskets meet ASME-BPE standards and are suitable for bioprocessing applications. Platinum-cured silicone braided hose is available in single braided hose from 0.125 in. to 1 in. sizes whereas double braided hose comes in ½ in., ¾ in. and 1 in. internal...

Read More »
OPTIMUM Gasket Makers is resistant to oils and shop chemicals.
Gaskets

OPTIMUM Gasket Makers is resistant to oils and shop chemicals.

Available in grey and black variants, OPTIMUM Gasket Maker is available in 3.35 oz carded tube with an extra nozzle. Suitable for intake manifold end seals, valve covers and oil pans applications, Grey Gasket Maker can withstand torque loads and vibrations whereas Black Gasket Maker withstand dynamic changes in assemblies with lightweight alloys and bolt patterns. Grey Gasket Maker offers maximum...

Read More »
Now any Enclosure Can be a Fibox!
Protectors

Now any Enclosure Can be a Fibox!

Fibox’s Instrument Protection Window (IPW) is now available in two sizes (12 x 10 3.31 and 16 x 14 x 3.31), with an opaque or transparent cover, and several locking options. The IPW maintains its UL listed NEMA 4X status on any enclosure thanks to its dual Formed-In-Place PUR gasketing system. Sporting a low profile continuous hinge design and sleek integrated quarter turn locks, the IPW is...

Read More »
Gaskets

Dymax Receives Another US Patent

Torrington, Connecticut – September 23, 2016 - Dymax Corporation has recently announced it has been awarded a new patent by the United States Patent and Trademark Office (USPTO). US Patent No. 9,394,436 entitled “Form-In-Place Gasket With Tack Free Surface” was received for a method for preparing a flexible, substantially tack free gasket by forming a liquid composition that would enclose...

Read More »

All Topics