PC/104 Express Frame Grabber captures 8 channels of video.
SuitedÂ- for real-time situational awareness systems, AVC8000X is equipped with 8 mono audio inputs and can capture up to 8 concurrent analog PAL/NTSC/RS170 video inputs for local system display or on-going software analysis and processing. PC/104 form factor card supports frame rates up to 240 fps, and captured video can be scaled, cropped, and positioned under software control and streamed...
Read More »
Frame Grabber can double Camera Link cable length.
Suited for high-speed and high-resolution area scan and linescan applications, Grablink Full XR (eXtended Reach) acquisition boardÂ- incorporates ECCO+ feature that can double max length of Camera Link cables and thereby eliminate need for repeater. ECCO+ offers skew compensation and signal equalization technique to restore the Camera Link signal integrity. Frame grabber also...
Read More »
PCIe Frame Grabber offers 8 asynchronous input channels.
Model 812 offers 8 channels for capturing full 30 fps (NTSC) or 25 fps (PAL) video, resulting in respective aggregate rates to 240 or 200 fps. Associatively,Â- 8 channels of mono audio can also be captured. Board implements PCIe x1 interface that facilitates plug-and-play operation with any PCIe slot width, and all operating power is supplied from PCIe bus. Captured video data can be...
Read More »
Video Capture Cards bring audio and HD to laptops.
Utilizing single coaxial cable connector, HD-SDI ExpressCard/34 (VCE- HDEX02) and HD-SDI ExpressCard/54 (VCE- HDEX01) feature 34 and 54 mm ExpressCard form factors, respectively. When used with camera that transmits video using SD or HD serial digital interface format, cards allow user to view and store video in real-time. Cards can also capture 2 channels of 24-bit audio at 48 KHz, making it...
Read More »
Design Guide: Heat Sinks for High-Power Applications
Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.
Read More »Teledyne DALSA Supports New Camera Link HS Standard
Teledyne DALSA will demonstrate camera and frame grabber support for CLHS - the AIA's latest machine vision protocol - at The Vision Show in Boston. Teledyne DALSA, a Teledyne Technologies company and a global leader in machine vision technology, announced today a major milestone in its ongoing support for the AIA's newest interface standard, Camera Link HS(CLHS). Teledyne DALSA will demonstrate...
Read More »4-Port Frame Grabber features PoE and IEEE 1588 PTP.
Suited to manufacturing environments utilizing multi-camera acquisition, Model GIE64+ supports PCI Express® x4 lane, 4 independent Gigabit Ethernet ports with data transfer rates up to 1 Gbps, and GigE Vision camera compliance. Multi-channel synchronization, PoE interface, IEEE 1588 PTP technology, and Smart PoE power status management support enable frame grabber to cut cabling...
Read More »
New Image Acquisition PCI Express Frame Grabbers
Multipix bring news that Euresys renew their first products of the Picolo series, launching their new PCI Express versions of the popular PAL/NTSC image acquisition cards. The two new PCI Express cards are fully interchangeable with their PCI equivalents. The first of them, the Picolo PCIe acquires one or two composite or one S-Video video signals. The Picolo PCIe is equipped with four TTL I/O...
Read More »DVI/VGA/HDMI Frame Grabber delivers lossless capture.
Able to fit into x4, x8, or x16 PCIe 1.x slot, DVI2PCIe captures video from any single-link DVI, unencrypted HDMI video, VGA, DisplayPort, Mini DisplayPort, Thunderbolt video, or BNC/component video source. Card can capture full HD video at a 30 fps for 1080p video and supports video sources wih resolutions up to 1,920 x 1,200. Capturing video in 100% lossless quality, frame grabber has 128 MB...
Read More »New Framegrabber Technology Pushs the Frontier of CameraLink Cable Lengths
The new Camera Link frame grabbers from Euresys now implement ECCO. ECCO stands for Extended Camera Link Cable Operation". This new feature allows Grablink Full, Dual Base and Base to go far beyond the Camera Link specifications in terms of speed and/or cable length. Depending on the clock frequency and the quality of the cable, which can drastically vary from one cable to another, ECCO allows...
Read More »National Instruments Introduces New Vision and Motion Hardware with NI RIO Technology
NI LabVIEW FPGA-Powered Frame Grabber and Motion Drive Help Engineers Create Custom Inspection and Machine Control Solutions AUSTIN, Texas -- National Instruments (Nasdaq: NATI) today introduced two new additions to its popular NI reconfigurable I/O (RIO) technology including a reconfigurable Camera Link frame grabber for demanding embedded vision applications and a motion module for the NI...
Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.
Read More »
