Fluid & Gas Flow Equipment

Atomizing Spray Nozzle comes in stainless steel construction.

Dec 14, 2017

Internal Mix 360 Degree Atomizing Spray Nozzle can spray in directions up to 13 ft in diameter. Unit is suitable for dust suppression, humidification and cooling applications. Product offers liquid flows from 10.8 to 150 gallons per hour and uses compressed air or liquid flows from 10.8 to 150 gallons per hour. Spray nozzle is available in 1/8 NPT, 1/4 NPT and 1/2 NPT connections and is CE... Read More

Fluid & Gas Flow Equipment

Ripsaw HD Rotating Turbo Nozzle comes with heavy-duty coating.

Oct 07, 2017

Ripsaw HD Rotating Turbo Hydro Excavation Nozzle is offered in standard (blue) and heavy-duty (green) versions. Product’s special urethane formulation makes it suitable for use in frost, shale, and other rocky conditions. These units help the operators to save water and dig faster.

Read More

Fluid & Gas Flow Equipment

Hydra-Flex Wins Best New Product Design Award at 2017 Minnesota Manufacturing Awards

Oct 07, 2017

September 28, 2017 - Minneapolis-St. Paul, MN - Hydra-Flex, Inc., manufacturer of innovative fluid handling equipment, has been named the winner of the Best New Product Design category in the 2017 Minnesota Manufacturing Awards for their Ripsaw™ Rotating Turbo Nozzle. This award was given to a manufacturer that developed a product that excels in its design, ease of application, utility, and... Read More

Architectural and Civil Engineering Products, Fluid & Gas Flow Equipment, Safety & Security Equipment

Heat Trace Showers are integrated with anti-scald valve.

Jul 20, 2017

Providing dependable freeze protection down to -50° F/-46° C, S19-304 Series Heat Trace Showers come with halo eye or eye/face wash. Equipped with optional signaling system, indicator light, extension cable and drench hose, units meet NEMA 4X standard. Integrated with freeze protection valve, products are insulated by yellow ABS plastic shell. Showers are suitable for petrochemical... Read More

Fluid & Gas Flow Equipment

No Drip Atomizing Spray Nozzle features 360° hollow circular pattern.

Jun 30, 2017

Suitable for applications such as dust suppression, humidification and cooling, No Drip Atomizing Spray Nozzle is available with 1/8 NPT, 1/4 NPT and 1/2 NPT connections. Delivering liquid flow ranging from 1.6 to 14.7 gph with liquids up to 300 cp, unit can be used with water, light oils, chemicals, rust inhibitors, paints and dyes. Featuring stainless steel construction, nozzle provides even... Read More

Architectural and Civil Engineering Products, Fluid & Gas Flow Equipment, Safety & Security Equipment

Gravityflo Emergency Tank Shower features stainless steel showerhead.

Jun 22, 2017

Having capacity of 2,000 L, Gravityflo® Emergency Tank Shower is equipped with integral heater that maintains water temperature in the range of 60°F - 100°F. Featuring emergency eyewash with plastic bowl with push-handle activator, unit delivers flow rate of 20 gpm. Designed with UL-approved electrical components, shower comes with PIR activated area light and heat tracing capability.

Read More

Fluid & Gas Flow Equipment

Aqua-Rocket Turbo Nozzles feature stainless steel housings.

Apr 28, 2017

Featuring tungsten carbide nozzle tips, Aqua-Rocket™ Industrial Turbo Nozzles come with improved impingement and stream quality. Equipped with high-temperature and drop-resistant cover for longer life and less maintenance, unit’s nozzle rotor travelled a distance of 6,292.5 miles during life test.

Read More

Fluid & Gas Flow Equipment

Model 1004SS Back Blow Air Nozzle meets OSHA noise standards.

Mar 20, 2017

Made of type 316 stainless steel for corrosion resistance, Model 1004SS M4 NPT Back Blow Air Nozzle can fit inside openings of 6.3 mm to 25.4 mm in diameter. Suitable for blowing debris and liquids in channel, bores, holes and internal threads, unit is designed with array of holes for forceful 360° airflow. Featuring flats milled body and chip shields, unit’s extension pipe can be stocked... Read More

Fluid & Gas Flow Equipment

Siphon Fed Atomizing Spray Nozzle features stainless steel construction.

Feb 16, 2017

Available in ¼ and ½ NPT connections, Siphon Fed Atomizing Spray 303SS Nozzle helps in coating, cooling, treating and painting products with air and liquids of up to 300 centipoise viscosity. Providing up to 68 GPH liquid flow in 6 in. diameter with 24 in. suction height, units draw liquids into airstream and are used with light oils, rust inhibitors, chemicals, paints and dyes.

Read More

Fluid & Gas Flow Equipment

Ion Air Jet features electromagnetic shielding.

Dec 10, 2016

Featuring metal armored high voltage cable, replaceable emitter point and integrated ground connection, Ion Air Jet is available with permanent mount with base for benchtop applications. Designed with electrically energized emitter discharge end, unit is capable of neutralizing high static charges in fractions of second. Provided with optional adjustment for air volume and velocity, air jet is... Read More

Fluid & Gas Flow Equipment, Transportation Industry Products

Gulfstream to Showcase Four-Living-Area G650ER at MEBAA 2016

Nov 23, 2016

Interior Demonstrates Cabin Flexibility And Customization

SAVANNAH, Ga., Nov. 21, 2016 - Gulfstream Aerospace Corp. is pleased to display three of its business jets at the Middle East and North Africa Business Aviation Association (MEBAA) Show Dec. 6-8 in Dubai. The static display will include the company flagship Gulfstream G650ER as well as the high-performing Gulfstream G550 and the... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, HVAC

Ion Air Jet offers easy installation using 1/8 NPT male inlet.

Nov 14, 2016

Using small amount of compressed air to entrain 80 percent of the total output airflow from the surrounding room air, Ion Air Jet minimizes compressed air use and maximizes ionized airflow. With positive and negative ions capable of neutralizing high static charges, unit’s electrically energized emitter at the discharge end fills the entire airstream. Available with permanent mount or... Read More

Fluid & Gas Flow Equipment

No Drip Spray Nozzle conserves fits in tight spaces.

Oct 14, 2016

Atomizing fluid and spraying at right angle to nozzle orientation, ¼ NPT No Drip Internal Mix Spray Nozzle places spray precisely where it is needed when mounting and work areas are limited. When compressed air supply is shut off, nozzle positively seals off flow of liquid, eliminating possibility of drips and conserving liquid. Fully adjustable unit is available in 5 patterns: narrow angle... Read More

Fluid & Gas Flow Equipment

Husky Announces Availability of Ultra Helix(TM) 350 Nozzles

Oct 14, 2016

BOLTON, Ontario  -  Husky Injection Molding Systems today announced the availability of the Ultra Helix™ 350 valve gate, expanding the existing product line of the award-winning valve gate technology released in 2015. This new series of nozzles provides customers even more options for creating a wider range of applications, producing better quality parts with the longest gate life of any... Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Mechanical Components and Assemblies, Mounting & Attaching Products, Services

Choice Waterjet Parts Exhibiting at FABTECH Choice Supplies Waterjet Parts for All Major Brands

Aug 31, 2016

ST. MICHAEL, Minn. (August 16, 2016) - Choice Waterjet Parts, a division of Jet Edge, is exhibiting at FABTECH, Nov. 16-18 in Las Vegas. Look for Choice Waterjet Parts in Booth C25085. During FABTECH, Choice will display a wide range of waterjet parts, including nozzles and orifices, UHP pump parts, cutting heads, cutting head parts, on/off valve parts, HP seal kits, swivels and much more. Choice... Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Material Handling & Storage

Photoresist Coating System uses ultrasonic nozzle technology.

Jul 05, 2016

Replacing traditional spin coating equipment, Model SPT200 is designed to meet challenges of coating high aspect ratios and deep well topographies such as MEMS wafers with photoresist. System is typically configured with Vortex or AccuMist ultrasonic spray shaping nozzles, depending upon requirements. Designed for 100, 150, 200, and 300 mm wafers, SPT200 provides automated spray coating with... Read More

Fluid & Gas Flow Equipment

External Mix Spray Nozzles coat, cool, treat, and paint.

Jun 09, 2016

Able to atomize fluids at up to 303 gph, 1/2 NPT large external mix spray nozzles combine liquid and compressed air to produce narrow angle flat fan pattern. Nozzles feature corrosion-resistant, stainless steel construction and are compatible with 800 cP viscosity liquids. Airflow and liquid flow can be controlled independently for precise liquid flow in product coating, cooling (when used with... Read More

Fluid & Gas Flow Equipment

Back Blow Air Nozzle cleans inside diameters.

May 12, 2016

Featuring array of holes that provide 360° airflow, 1 NPT Model 1008SS blows debris and liquids from pipe or hose inside diameters, axle housings, bores, internal threads, and other internal part features found in hydraulic cylinders, gear boxes, and differential housings. Nozzle is constructed of Type 316 stainless steel for corrosion resistance and fits inside openings ranging from 2–16 in.... Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Material Handling & Storage

Suction Blast Cabinets

Apr 25, 2016

Startus Technologies has an innovative Pro-Finish suction cabinets which cost less and are simpler than pressure cabinets. These suction cabinets blast continuously without the need to stop for media refills, and they simplify the use of multiple nozzles. The results are usually comparable to those achieved with a pressure system although production rates are not so high. When initial cost and... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing, Optics & Photonics, Services, Transportation Industry Products

ULA Atlas V Rocket Lifts off with 3D Printed Parts

Mar 25, 2016

MINNEAPOLIS REHOVOT, Israel - Stratasys Ltd. (Nasdaq:SSYS) supported a United Launch Alliance (ULA) Atlas V rocket, launched yesterday from Cape Canaveral Air Force Station in Florida. The Atlas V rocket flew serial production 3D printed parts enabled by Stratasys support and technology. The 3D printed parts highlight the ability to replace metal components with 3D printed lightweight... Read More