Fasteners

Fasteners combines benefits of rivets and screws.
Fasteners

Fasteners combines benefits of rivets and screws.

Using Avdel(TM) 753 hand tool, Rivscrew(TM)PL coarse-threaded, blind fasteners can be applied at rates to 60/min. Hex key can remove and reinsert them up to 5 times with no reduction in performance. Made from low-carbon steel with zinc plating, Rivscrew(TM)PL for plastics is available in two 4.8 mm dia versions with grip ranges of 2.8-6.6 mm and 2.8-11.5 mm. Products combine speed of rivet...

Read More »
Self-Clinching Nuts suit thin-sheet applications.
Anchor Nuts

Self-Clinching Nuts suit thin-sheet applications.

Type SMPS(TM) stainless steel nuts provide reusable threads with 1 mating screw required to complete component attachment. They can be installed in sheets as thin as .025 in. to become permanent part of assembly. Made from 300 Series stainless steel, fasteners are available in unified and metric thread sizes No. 2-56 through No. 6-32 and M2.5 through M3.5. They have diameter of .220 in. and...

Read More »
Fasteners simplify overhead rod hanging.
Ceiling Suspension Systems

Fasteners simplify overhead rod hanging.

Vertigo system consists of 3 anchors that fasten into concrete, metal, or wood. Each has internally threaded coupling head for 1/4, 3/8, or 1/2 in. diameter rod. Metal and wood anchors also offer side-mount style head for lateral installation of 1/4 and 3/8 in. diameter rod on to joists, columns, and trusses. Applications include HVAC, overhead conduits, acoustical and drop ceilings, and plumbing.

Read More »
Fastener utilizes pre-installed stud.
Weld Studs

Fastener utilizes pre-installed stud.

Weld stud mount, when used with a cable tie, secures wire harnesses and hoses to frame. Suitable for transportation and heavy equipment manufacturing, unit is manufactured from heat stabilized, impact modified nylon 6/6. Weld stud mount will not rust or abrade wire, cable, or hoses. Installed by use of welding equipment, weld stud mount can be applied to metal surfaces in 1/3 of 1 sec.

Read More »
Fastener is self-locking and vibration resistant.
Fasteners

Fastener is self-locking and vibration resistant.

A-Lock nut and bolt fastener features all steel construction, cylindrical shape, and uniform thread. Two piece unit uses wedging action of thread's shallow inclines for self locking, eliminating need for additional parts such as lock washers and nylon patches. A-Lock is reusable and may be applied in various environmental conditions. It is certified for vibration resistance as per MIL-STD-810D,...

Read More »
Fasteners

Panel Fasteners enable access to components after assembly.

With captive-screw design, self-clinching panel fasteners are suitable for attaching metal panels as thin as .036 in. They are available in two types: with knurled knobs (Type PF13(TM)) and without (Type PF14(TM)). Both complete spring-loaded panel fastener assemblies are offered with choice of three screw lengths and thread sizes from #4-40 through 1/4-20 and M3 through M6.

Read More »
Roofing Fasteners hold down Spanish tile roofs.
Fasteners

Roofing Fasteners hold down Spanish tile roofs.

Collated fasteners for company's Fastening Autofeed Screw Gun fit state building codes that call for two nails or one screw per tile. Fasteners have extra sharp points to pierce roofing glaze, and let builders combine speed of nail gun with fastening capabilities of screws. Combined with countersinking screw gun, they help builders reduce broken tiles. Other fasteners include wood to steel screws...

Read More »
Fasteners eliminate need for nuts and bolts.
Fasteners

Fasteners eliminate need for nuts and bolts.

Steel, stainless steel, and aluminum self-clinching devices provide permanent load-bearing threads in metal sheets too thin to be tapped. Fasteners also can serve as alternatives to extruded or stamped threads. They are available in dozens of types and thousands of variations, including free-running, self-locking, floating, and blind hole types meeting unified, ISO, and MIL standards. Fasteners...

Read More »
Attaching Tool inserts fasteners through fabrics.
Fastener Drivers

Attaching Tool inserts fasteners through fabrics.

Portable MicroTach(TM) hand tool inserts 0.172 in. T-End fasteners through fabrics and paper or cardboard packaging, replacing thread, pins and metal staples. Fasteners can hold 2 pieces of fabric tightly together or secure fabric to packaging. Tool is made of polycarbonate material for use in factory environments. It is available with brush anvil, which can serve as firm fastening application...

Read More »
Flame Retardant Fasteners meet aerospace standards.
Hook and Loop

Flame Retardant Fasteners meet aerospace standards.

Scotchmate(TM) reclosable polyester Series SJ3586FR and SJ3587FR meet Federal Aviation Administration's 60-sec and 12-sec vertical burn tests (FAR 25.853). Hook and loop interlocking can be opened and closed for access or frequent repositioning applications such as seat cushions, interior trim covers, and wall panels. Sound and vibration dampening helps reduce squeaks and rattles. Fasteners are...

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers